Operation Manual

www.honeywell.com/security
64 | Performance Series Full PoE Network Video Recorder User Guide
6. At the left of the scheduling table, select the day(s) of the week for which you want to
configure a recording schedule. To configure the same recording schedule for all of the
days at the same time, select All.
7. Click or drag the mouse in the scheduling table to set the recording period. To erase a
recording period, click the eraser icon at the right of the table. Alternatively, for the day
of the week that you want to configure, click the gear icon at the right of the table. In the
Period window, set up to six recording periods. To copy the settings to additional days,
select the appropriate check box(es) under Copy, and then click OK.
8. Click Apply to save your settings.
9. To copy the recording schedule settings to additional channels, click Copy, select the
channels to which you want to copy the settings, and then click OK.
Configuring the Snapshot Recording Schedule
Follow these steps to configure the snapshot recording function. When enabled, the NVR can
take snapshots when a motion detection, video loss, video tampering, or an alarm event occurs.
See Chapter 8, Configuring Event Settings for detailed instructions.
To configure the snapshot recording schedule
1. In the SETTING field in the Main Menu, go to STORAGE > SCHEDULE.
Figure 4-3 Snapshot Schedule Settings
2. On the Snapshot tab, in the Channel box, select the channel (camera) for which you want
to configure a snapshot schedule.
3. At the top of the scheduling table, select the check box(es) of the recording type(s) that
you want to schedule:
• Regular The regular recording schedule is indicated by a green bar.