Operation Manual

Configuring Network Settings | 87
800-21090V2 - A - 03/2016
Figure 7-2 Network Port Settings Window
2. On the Connection page, you can configure the following settings:
3. Click Apply to save your settings.
4. If you want to save your settings and exit the SETTING menu, click OK.
Note You must restart the NVR to apply any changes to the NVR’s port settings.
Ensure that the port settings do not conflict with each other.
•Max Connection Select a value between 0 and 20. The default setting is 20.
• TCP Port Select a value between 1025 and 65535. The default setting is
37777.
• UDP Port Select a value between 1025 and 65535. The default setting is
37778.
• HTTP Port Select a value between 0 and 65535. The default setting is 80.
• HTTPS Port Select a value between 0 and 65535. The default setting is 443.
• RTSP Port Select a value between 0 and 65535. The default setting is 554.