Operation Manual

Configuring Network Settings | 95
800-21090V2 - A - 03/2016
4. Click Apply to save your settings. To test the FTP connection, click Test.
5. If you want to save your settings and exit the SETTING menu, click OK.
Configuring UPnP Settings
The Universal Plug and Play (UPnP) protocol is used to map the relationship between the LAN
and the WAN.
To configure UPnP settings
1. In the SETTING field in the Main Menu, go to NETWORK > UPnP.
Figure 7-10 Network UPnP Settings Window
2. On the UPnP page, configure the following settings:
• Remote Directory Enter a name for the remote directory. If this is left blank, the NVR will
automatically create folder names.
•File Length This is the maximum size for image files being uploaded to the FTP
server. Enter a value between 0 and 65535 MB.
• Image Upload
Interval
This is the interval for uploading images to the FTP server. Enter a time
between
0 and 3600 seconds.
• Channel Select a channel to upload images from, or select All to select all
channels.
• Weekday Select a day of the week to upload images on, or select All to upload
images every day.
•Time Periods You can configure up to two time periods for uploading images. For
each period, select either
Alarm , Motion , or Regular images.
•Enable Click to enable or disable UPnP.
•LAN IP Enter the NVR’s IP address from the TCP/IP page.