Operation Manual

www.honeywell.com/security
48 | Performance Series Full Poe Embedded NVR Remote User Guide
Note Do not register frequently. You need to wait at least 60 seconds between
registration requests. Too many registration requests might leave your server
vulnerable to attacks.
Note The system DDNS server might take back a domain name that is idle for one
year. If you configure your email address in the DDNS configuration, you will get
a notification email before the domain name is taken back.
Quick DDNS and Client-end Introduction
Background Introduction
If you use ADSL to log into the network, then the device IP is not fixed. The DDNS function allows
you to access the NVR via the registered domain name. Additional to the general DDNS, the
Quick DDNS works with the manufacturer’s device so that it can add the extension function.
Function Introduction
The quick DDNS client has the same function as other DDNS client ends. It bonds the domain
name and the IP address. Currently, the DDNS server only works with our own devices. You
must regularly refresh the bonding relationship between the domain and the IP. There is no
username, password, or ID registration on the server. However, each device has a default
domain name (generated by the MAC address). You can also use a customized valid domain
name which has not been registered.
Quick DDNS Operation
Before you use Quick DDNS, you must enable this service, and configure the correct server
address, port value, and domain name.
Server address: www.quickddns.com
Port number: 80
Test Click the Test button to test the DDNS configuration/network
connection.
Email Address The Honeywell applied-for DDNS has an expiration date. When
that expiration date is reached, the system sends an email prompt
to this email address.
Table 3-9 DDNS Configurations
Parameter Description