Operation Manual

Configuration | 83
800-21261V3 - A - 05/2016
Click PAN/TILT/ZOOM under SETTING to open the PAN/TILT/ZOOM configuration interface
Figure 3-52 PAN/TILT/ZOOM Configuration Interface
Accounts
Some Basic User and Group Rules
• You can use up to 6 characters for user names and group names. You can not use a
space at the beginning or end of a name. You can use characters, numbers, and an
underline (_).
• You can add up to 64 users and 20 groups (these are also the default settings). The
default setting includes two group levels: user and admin. Configure the Group privileges,
and then assign users to their groups according to the privileges those users require.
• User management involves assigning privileges to groups, and users to groups. User
names can not be the same as group names; user names and group names must be
unique. Users can belong to only one group.
Click Account under SETTING to open the Account settings configuration interface.
Table 3-25 PAN/TILT/ZOOM Configuration Interface
Setting Description
Channel Select a channel.
PTZ Type Select Remote for the PTZ type. A remotely connected IP
camera is connected through the network.