Operation Manual

800-21261V3 - A - 05/2016
3
Configuration 3
This chapter includes descriptions about how to configuring the following:
•Camera setup
•Network setup
• Event settings
• Storage
• General settings, including the following:
• the device’s name and number
• the interface language
• the video standard
• what happens when the HDD is full
• the pack duration
Setup
Configuring the Camera Setup through the Remote Interface
If the NVR connects to an IP camera through a private protocol, then the Camera Conditions
page displays. If the NVR connects to an IP camera through the ONVIF protocol, then the
Camera Conditions does not display.
Configuring Camera Image Settings
In the Camera Conditions window, you can view the camera device properties. Any changes
are immediately active after you set them.
Click Camera under REMOTE to open the Conditions interface.