Operation Manual

Configuration | 39
800-21261V3 - A - 05/2016
Configuring the Save Path
Configure the save path for snapped images (click in the preview interface) or recorded
video (click in the preview interface).
Figure 3-5 Save Path Configuration Interface
The default save path is C:\PictureDownload for snapshots and C:\RecordDownload for
recorded video.
Click Browse to change the save path, and then click Save.
Configuring the Channel Name
1. Click Channel Name under REMOTE to open the Channel Name configuration interface.
Table 3-4 Video Overlay Configurations
Setting Description
Cover-Area 1. Select Preview or Monitor.
2. Click Set, then draw a privacy mask on the specified video
in preview or on monitor video.
The NVR system supports a maximum of four privacy zones.
Channel Display Enable this function so that the system overlays channel
information in the video window.
Use the mouse to drag the channel display into position.
You can see the channel on the live WEB video or the
playback video.
Time Display Enable this function so that the system overlays time
information in the video window.
Use the mouse to drag the time display into position.
You can see the time on the live WEB video or the playback
video.