Operation Manual

Configuration | 45
800-21261V3 - A - 05/2016
Configuring the Mobile Settings
Click Mobile Setup under 3G to open the Mobile Setup configuration interface.
Figure 3-11 Mobile Setup Configuration Interface
Activate/deactivate 3G connected phones or mobile phones, or the phone you configured to get
alarm messages.
Configuring PPPoE
1. Click PPPoE under NETWORK to open the PPPoE configuration interface.
Note If the Pulse Interval is 0, then the system does not end the 3G connection after you
close the extra stream monitor.
Note The Pulse Interval here is for the extra stream only. This field is inactive if you are
using a main stream monitor.
IP Address Non-configurable. After the NVR connects to the network
through CDMA/GPRS, it receives an IP address, which
displays here.
Wireless Signal When the NVR connects to 3G through GPRS/CDMA, by
clicking SEARCH, you can see the signal strength.
Table 3-7 CDMA/GPRS Configurations
Configuration Description