Operation Manual
www.honeywell.com/security
52 | Performance Series Full Poe Embedded NVR Remote User Guide
Click Test to test the FTP connection. A popup window shows the status of the connection.
Configuring UPnP
UPnP allows you to establish the mapping relationship between the LAN and the public network.
Here you can also add, modify, or remove a UPnP item.
Preparing for UPnP
1. In the Windows OS, click Start Control PanelAdd or remove programs.
2. Click Add/Remove Windows Components, and then select Network Services from the
Windows Component Wizard.
3. Click Details, then check Internet Gateway Device Discovery and Control client and
UPnP User Interface. Then click OK to begin the installation.
4. Enable UPnP from the internet. If your UPnP is enabled in the Windows OS, then the NVR
can automatically detect it through the My Network Places.
Configuring UPnP
1. Click UPnP in the NETWORK configuration interface to open the UPnP configuration
interface.
Table 3-11 FTP Configurations
Setting Description
Server IP Enter the IP address for the server.
Port Enter the Port number for the server.
Username Enter the user name for logging into the server.
Password Enter the password for logging into the server.
Anonymous Click to enable/disable anonymously logging into the server.
Remote Directory When the remote directory is null, the NVR automatically creates folders
according to the IP, time, and channel.
File Length Here you determine the size of the upload file. If the setup file size is
larger than the actual file, then the system uploads the entire file. If the
setup file size is smaller than the actual file, then the system uploads only
the set file size. If you enter 0 here, then the system uploads all
corresponding files.
Image Upload
Interval
This is the interval that the CVR waits through before uploading an image
to the FTP site. Select from 0 to 3600 seconds. 0 means that there is no
interval.
Channel Select a channel.
Weekday Select a weekday.
Time Periods You can configure up to two time periods per channel.
Recording Type Select from Alarm, Motion, or Regular.