Operation Manual

Configuration | 81
800-21261V3 - A - 05/2016
Tour Configurations
In the Tour interface, you can set the Tour Interval, Split mode, Motion Detection Tour, and
Alarm Tour modes.
Click the Tour tab in the DISPLAY configuration interface under SETTING to open the Tour
configuration interface.
Figure 3-50 Tour Configuration Interface
Image Enhance Check to enable Image Enhance, to optimize the preview
video.
Auto Logout Enter the how long the NVR waits before automatically
logging the user out.
Startup Wizard Click to enable the Startup Wizard on restarting or starting up
the NVR.
Navigation Bar Click to enable/disable the navigation bar.
Original Scale Click Set to select to show channels in their original aspect
ratio. Unselected channels display in full screen.
Table 3-22 GUI Configurations
Configuration Description
Table 3-23 Display Tour Settings
Setting Description
Enable Tour Check to enable this function.
Interval Adjust the transparency. Select from 5s to 120s. The default
is 5s.