Operation Instructions

2 3
ENGLISHENGLISH
IMPORTANT SAFETY INSTRUCTIONS
Read through all the instructions
before starting to use the appliance.
Keep this manual in a safe place for
future reference.
These instructions are also available
on our website. Please visit www.hot-
europe.com.
• This appliance must only be
operated as instructed in this user
manual.
• This appliance can be used by
children aged from 8 years and
above and persons with reduced
physical, sensory or mental
capabilities or lack of experience
and knowledge if they have been
given supervision or instruction
concerning use of the appliance in a
safe way and understand the hazards
involved. Children shall not play with
the appliance. Cleaning and user
maintenance shall not be made by
children without supervision.
• Do not touch the rotating fan blades
with any part of the body. This can
cause personal injury and damage.
• Clean the appliance regularly by
following the “Cleaning” section.
• This appliance is only designed for
indoor use.
• Always switch the appliance off
when not in use, during cleaning or
transport.
• If the supply cord is damaged,
it must be replaced by the
manufacturer, its service agent or
similarly qualified persons in order to
avoid a hazard.
• Do not use this appliance if it is
damaged or shows any signs of
possible damage, or if it is not
functioning properly. Disconnect the
power plug from the power socket.
COMPONENTS (See page 1)
1. Grille
2. LED Control panel
3. Base
4. Power cord
5. Remote control
6. Carrying handle
7. Power button
8. Fan speed setting
9. Oscillation
10. Auto-off timer
INTRODUCTION
The Turbo Force™ Power Digital Oscillating Floor Fan
is aerodynamically designed to give you the versatility
of changing this fan’s angular direction simply by
adjusting the fan to the desired angular output
(Fig. 1). Upon using this fan, you will feel a strong and
powerful air stream that will quickly move air to provide
a cooling effect.
OPERATING INSTRUCTIONS
ON/OFF and SPEED CONTROL (See page 1, fig. 2)
Be sure the fan is in the OFF position.
Place your fan on a dry, level surface.
Plug the power cord into a wall outlet.
ON/OFF
push the (
) button. The unit will default to the HIGH
fan speed.
To operate, press the (
) button to the desired fan
speed: HIGH (
), MEDIUM ( ) or LOW ( ).
LEDs will light each speed as you press the (
) button
to change fan speed.
OSCILLATION
To activate wide area oscillation feature, press the
oscillation button once (
).
Press the Oscillation button again to turn the
Oscillation feature off.
AUTO-OFF TIMER OPTION
To activate the AutoOff Timer option choose from 1, 2
or 4 hour settings by pressing the timer (
) button.
1 hour: Press the Timer button (
) once.
2 hours: Press the Timer button (
) twice.
4 hours: Press the Timer button (
) a third time.
Press the Timer button (
) a fourth time to turn the
Timer feature off.
ANGULAR OUTPUT
Adjust the fan to the desired angular air output
direction.
Fan head pivots 90 degrees.
REMOTE CONTROL OPERATION
(See page 1, fig. 5)
ON/OFF
Remove remote control from the back of the fan. The
remote control will not work while in the fan housing.
Press the Power button (
) once to turn the fan on.
Press the Power button a second time to turn the fan
off.
SPEED CONTROL
To adjust the speed up or down, press the Fan Speed
button (
) repeatedly to increase level.
Press button once for HIGH
Press button twice for MEDIUM
Press button three times for LOW
TIMER
• Choose from 1, 2 or 4 hour settings by performing
the following function:
• 1 hour: Press the Timer button (
) once.
• 2 hours: Press the Timer button (
) twice.
• 4 hours: Press the Timer button (
) a third time.
• Press the Timer button (
) a fourth time to turn the
Timer feature off.
OSCILLATION
Press button once (
) for ON
Press button again for OFF
CLEANING AND STORAGE
• Ensure the fan is turned off and unplugged.
• Use only a soft cloth to gently wipe the outer
surfaces of the fan clean.
• Do not immerse the fan in water and NEVER allow
water to drip into the motor housing.
• Do not use gasoline, paint thinner, or other
chemicals to clean the fan.
• Store your fan in the original box or cover the fan
to protect it from dust and debris. Store the fan in a
cool, dry place.
• Do not wrap the power cord around the base of the
fan. This could result in damage to the power cord.
DISPOSAL
This appliance complies with EU legislation
2012/19/EU on end of life recycling. Products
showing the ‘Crossed Through’ wheeled bin
symbol on either the rating label, gift box or
instructions must be recycled separately from
household waste at the end of their useful life.
Please DO NOT dispose of appliance in normal
household waste. Your local appliance retailer may
operate a ‘take-back’ scheme when you are ready to
purchase a replacement product, alternatively contact
your local government authority for further help and
advice on where to take your appliance for recycling.