Use and Care Guide

2 3
OPERATION
• Ensure the air purifier is plugged into a working electrical outlet.
• Press the power button ( ) once. The unit will start at medium speed for a
few seconds and then automatically change to low speed (Fig. 2).
• Press the power button again to select a different cleaning level.
Portable air purifiers are more effective in rooms where all doors and
windows are closed. It is recommended that you run your air purifier while
you are at home to help clean the air.
Fig. 2
YOUR AIR PURIFIER
HOW YOUR AIR PURIFIER WORKS
ENHANCED ODOR REDUCTION
This model air purifier incorporates a 3-stage
cleaning system to clean the air that passes
through the filters in the unit (Fig. 1).
Stage 1: Washable or Odor-Reducing Pre-filter (your
choice) attaches to the rear grille. Captures
larger airborne particles and traps odors and
VOCs (when used with Optional
K
pre-filter).
Stage 2: Permanent Washable ifD
®
Particle Filter.
Captures microscopic airborne particles.
Stage 3: Electronic Ionizer boosts the cleaning power.
Washable or
Odor Reducing
Pre-Filter
ifD
®
Particle Filter
Fig. 1
SET-UP
• Select a firm, level and flat location. For best airflow, locate the unit 6 inches (15.2 cm) from any wall or furniture.
• When operating, large volumes of air are drawn toward the air purifier. Surrounding areas should be cleaned and/
or vacuumed frequently to prevent build-up of dust and other contaminants. This may also help prolong the life of
the filter. If the unit is placed on a light colored carpet, a small mat or rug should be used underneath to prevent
staining. This is especially important in homes with contamination from smoking or fireplaces.
ENERGY STAR
®
This product earned the ENERGY STAR
®
by meeting strict energy efficiency guidelines set
by the U.S. EPA. U.S. EPA does not endorse any manufacturer claims of healthier indoor air
from the use of this product.
The energy efficiency of this ENERGY STAR
®
qualified model is measured based on a ratio
between the model’s CADR for Dust and the electrical energy it consumes, or CADR/Watt.
DIMMER OPTION
The Dimmer Option ( ) allows you to adjust the brightness of the LED display
on the control panel. You may wish to adjust the brightness depending on the
room where the unit is placed.
• The unit always turns on with brightness on HIGH
• Press the ( ) button once and LED display will dim to Low setting (Fig. 3).
• The LED lights cannot be turned completely off
• Pressing the ( ) button a 2nd time will turn the LED brightness back to
HIGH.
Optional Odor
Reducing
Pre-filter
K
(packed in plastic bag)
(air intake is at the
rear of the grille and
output is from the
front of grille)
Fig. 3
OSCILLATION OPTION
To help circulate fresher, cleaner air through the room, this unit has an
oscillation feature.
• To turn Oscillation on, simply press the Oscillation button (
) (Fig. 4).
• To turn Oscillation off, press the button again.
Fig. 4
Permanant
Washable
ifD
®
Particle
Filters (2)
Rear
Grille
installed
Washable
Pre-filter
(1)
Control Panel
with Integrated
Carry Handle
The washable pre-filter comes installed in your air purifier and removes larger particles from the air that
passes through the filter. You may use this washable pre-filter, or you have the choice to use the Optional
Odor & VOC Reducing
K
Pre-filter that is packed in a bag that came with the air purifier. In addition to
capturing larger particles, the
K
Pre-filter will also trap common household odors and gases. If you choose
to use the
K
Pre-filter, you must remove the installed washable pre-filter then insert the
K
Pre-filter.
Remove
K
Pre-filter from plastic bag before use.
Note: the
K
Pre-filter cannot be washed and should be replaced every 3 months for optimum performance.
NOTE: Please only use one pre-filter in your air purifier at a time. You will need to choose whether you
want to use the permanent washable pre-filter or the replaceable pre-filter.