38kW Home Standby Generator Owner Manual

EXPLODED VIEW: AIR CLEANER 2.4L G2 TURBO
DRAWING #: 0H1955 GROUP D
APPLICABLE TO:
REVISION: H-4431-C PAGE 2 OF 2
DATE: 5/6/09
ITEM PART# QTY. DESCRIPTION
1 0E6586 2 GASKET BOSCH 32 & 40
2 0H0295 1 ADAPTOR PCV INTAKE
3 0A6593A 1 ADAPTOR - CARBURETOR
4 0C8127 1 ELEMENT, AIR CLEANER
5(1) 062974 1 STUD TH 1/4-20 X 4-1/2 G2 ZNC
6 022127 1 NUT HEX 1/4-20 STEEL
7 0G0190 1 PLATE, AIR CLEANER TOP 2.4L
8 037561 1 NUT WING 1/4-20 W/NY INS ST ZN
9(2) 0H1712 1 BARBED EL 90D 1/2NPT X 3/4
10 050830 4 SCREW HHC M5-0.8 X 40 G8.8
11(3) 0H0896 1 FITTING VENT VALVE COVER
0H1644 (6) 1 FTG VNT VALVE COVER 36/60KW G2
0G10080103 (6) 1(REF) GASKET, PCV VALVE
12 057822 2 CLAMP HOSE #8 .53-1.00
13 059057 1 HOSE 3/4 ID SAE-30R2 (17.5”LG)
14 047527 1 BARBED STR 1/2NPT X 3/4
15(5) 0H1787 1 PIPE INSULATION (17”LG)
16(4)(5) 0H1787A 1 PIPE INSULATION ELBO
17 0E8286 1 ELBOW 45D STREET 1/2NPT BRASS
18(5) 0H1801 1 PIPE INSULATION TAPE (14”LG)
(1) APPLY MEDIUM STRENGTH BLUE THREAD LOCKING FLUID TO THE THREADS ON THE
END OF STUDS (I/N 5) THAT SCREWS INTO THE CARB ADAPTER (I/N 2).
(2) APPLY PIPE SEALANT COMPOUND TO THREADS.
(3) APPLY RETAINING COMPOUND (P/N 078637-LOCTITE 620) BEFORE INSTALLING I/N 11 INTO THE ENGINE VALVE COVER.
(4) TRIM INSULATION ELBOW TO FIT.
(5) INSULATION SHALL COMPLETELY COVER I/N’S 17, 14, 13 & 9.
(6) ALTERNATE CONFIGURATION REQUIRES ALL NOTED PARTS.