Install Instructions

WIRING
Using the DIP Switches
The wiring features are congured by DIP settings, which are described under the TrueSTEAM cover.
STEP ONE: Remove the TrueSTEAM Cover
Loosen the cover screw.
Slide cover out from front.
With the cover removed, you will see six DIP switches
to the left of the user interface panel. This manual
refers to DIPs 1–6 from left to right.
STEP TWO: Understand the DIP Switches
DIPS 1 and 2 are used for maintenance.
DIP 1 and DIP 2: Together, these two DIPs specify
how often the automatic ush cycle is performed. See
“Routine Maintainence” on page 46.
65432
On
Off
1
M29608
65432
On
Off
1
M29609
Before Wiring TrueSTEAM
Before wiring the TrueSTEAM:
I will read the section “Understand the DIP Switches” beginning on this page
I will read the section “Deciding on the Wiring Conguration” beginning on page 28
CAUTION: Voltage Hazard.
Be sure TrueSTEAM is not plugged in when removing the cover.
TrueSTEAM Humidication System 69-2285—05 27
1
2
3