Install Instructions
OPERATION
AND SERVICE
The cleaning ush cycle is initiated when the Draining
light begins blinking. The cycle will take about
45 minutes to complete. It will take longer if using
RO lters.
When the Empty light is on, the tank is empty. The tank
may now be removed for cleaning or
other service.
Be sure to disconnect the TrueSTEAM from power
before beginning the cleaning procedure
M29628
M29629
CAUTION: Scalding hazard.
• If you override the cooling action of the ush cycle, the tank will empty immediately,
regardless of water temperature. Make sure the drain can handle up to 212°F (100°C) if
you do this.
• During manual drain, initial water temperature may be above 140°F (60°C). Scalding water
could splash out of the drain. Use caution when pressing the Drain button.
BEST
PRACTICE
Perform all cleaning steps at least once per humidication
season.
TrueSTEAM Humidication System 69-2285—05 45
4
3