Install Instructions

OPERATION

AND SERVICE

STEP TWO: Remove the Water Tank

Make sure the tank is empty. The Empty light turns on

when it is.

Turn the manual shutoff valve to the “Unlock” position.

Grip the white water valve arm and slide it back to

disengage from the tank’s black spool.

Grip the tank bottom rmly. Push down the safety

release button and pull the latch forward to

release the tank.

Note: The latch remains attached to TrueSTEAM and

is not removed with the tank.

M29630

CAUTION: Scalding hazard.

Do not attempt to remove TrueSTEAM from the mounting bracket during operation or when the

tank is full of water. The heating element could be hot when tank is removed. Failure to comply

could result in severe scalding.

TrueSTEAM Humidication System 69-2285—05