Install Instructions

GETTING
STARTED
Proper Sizing of a TrueSTEAM Humidier
The Air-Conditioning, Heating and Refrigeration Institute (AHRI) has set guidelines for determining humidication
capacity requirements. The recommendation is based on the cubic footage (volume) and type of home
construction – assuming typical conditions. It is important to realize many homes will have humidication
requirements that differ from the guidelines depending on how the circumstances differ from standard conditions.
Factors that impact the amount of humidity needed:
Geographic Area
Elevation
Ventilation type
Number of people living in the home
Ceiling height (i.e. cubic volume)
Window type (i.e. structure type)
Insulation type (i.e. structure type)
Equipment type
Converting square footage to cubic volume requires multiplying the square footage by the ceiling height (i.e. 2000
square foot space with 10 foot ceilings is 20,000 cubic feet). In general, the higher the ceilings, the smaller the
square footage space each TrueSTEAM model will cover since it must humidify the additional air volume.
AHRI denes structure type as follows:
Tight construction: Well insulated with vapor retarders, tight storm doors, windows with weather stripping,
dampered replace, and using ½ air change per hour of air inltration.
Average construction: Insulated with vapor retarders, loose storm doors and windows, dampered replace
with 1 air change per hour of air ltration.
Loose construction: Generally built before 1930 with little or no insulation, no storm doors, no insulated
windows, no weather stripping, no vapor retarders, undampered replace, and with 1-1/2 air changes per hour
of air inltration.
It is vital to take all of these factors into account when sizing a TrueSTEAM humidier for a particular home.
Undersizing the humidier will not only reduce the potential to meet the a desired humidity set point, it may also
lead to extensive system fan run time or higher operating costs as the system tries to deliver to the control’s
setting. While oversizing the humidier may lead to higher amp draw, the system run time will be less, which in
some situations may be less expensive at the bottom line.
TrueSTEAM Humidication System 69-2285—05 5