User Guide

EVERYDAY
OPERATION
The six lights show the Steam Humidier status and indicate when service needs to be performed.
Power (Green). On indicates the power cord is
plugged in.
Humidifying (Green).
Lit – Steam Humidier is actively heating water and
creating steam.
Blinking – Steam Humidier is resetting or lling. This
is usually done when plugging in the power cord, and
lasts for about 3 minutes. You can press the Go button
to reset the Steam Humidier immediately.
Dark – Steam Humidier is in Ready mode – it can
heat water and produce steam when a humidity call
comes from the control.
Empty (Green). When on, the water tank is empty and
can be removed for manual cleaning.
Service (Red).
Blinking – The number of blinks (1–18) shows the type
of fault the Steam Humidier has detected. See “What
should I do if the Service light is blinking?” on page 21.
Draining (Yellow).
Blinking – Steam Humidier is ushing water from the
tank for manual cleaning. See “What is the automatic
ush cycle?” on page 15.
Cleaning Required (Yellow).
On – Indicates that the tank needs to be cleaned
manually. See “How do I clean the tank?” on page 16.
M29628A
What do the lights tell me?
Steam Humidication System 69-2286EF—05 13