User Guide

CLEANING AND

MAINTENANCE

How do I reassemble and start up the Steam Humidier? Follow these steps to reassemble the tank and start

up the Steam Humidier after cleaning:

Attach tank by raising the latch.

Pull the white water valve forward to connect to the the

black spool. Then turn the manual shutoff valve to the

“Lock” position.

Plug in the power cord.

The Power light will be on at start-up. If the humidity

control is also actively calling for humidity, the

Humidifying light will blink. This indicates that the

Steam Humidier is waiting to act on the call to allow

time for the tank to be fully connected.

Press the Go button to make the Steam Humidier

ready for use. You must actively call for humidity

from the humidity control for the Steam Humidier to

produce steam.

Note: You don’t have to press the Go button after plugging in the power cord.

The Steam Humidier will wait for 5 minutes and then automatically reset itself.

MCR29675

MCR29676

M29677

Steam Humidication System 69-2286EF—05