HMLCD17e2, HMLCD19e2 e-Series LCD Monitor User Manual Document 800-00718 – Rev A – 07/07
Revisions Issue Date Revisions A July 2007 Initial Release
FCC COMPLIANCE STATEMENT Information to the User: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. This device complies with Part 15 of the FCC rules.
6. Never insert anything metallic into the monitor openings. Doing so may create the danger of electric shock. 7. To avoid electric shock, never touch the inside of the monitor. Only a qualified technician should open the monitor case. 8. Never use your monitor if the power cable has been damaged. Do not allow anything to rest on the power cable. Keep the power cable away from where people could trip over it. 9.
e-Series LCD Monitor User Manual Contents Connecting the Monitor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Mounting the Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Controls and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 D-Sub Connector Pin Assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Power Management . . . . . . . . .
Contents 6
e-Series LCD Monitor User Manual Figures Figure 1 Connecting to external devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Figure 2 Bottom panel controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Figure 3 Check input Signal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Figure 4 Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Figures 8
e-Series LCD Monitor User Manual Tables Table 1 D-SUB Pin Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Table 2 Power Consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Table 3 LED Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Table 4 Specifications list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Table 5 Parts list . . . . .
Tables 10
e-Series LCD Monitor User Manual Connecting the Monitor The e-Series LCD monitor can be used with your video surveillance system and connects to a number of external devices, such as a DVR, VCR or camera. Figure 1 Connecting to external devices Bottom Panel Controls Figure 2 1 Document 800-00718 Rev A 07/07 2 Bottom panel controls 3 4 5 6 7 8 9 1. PC STEREO IN 2. S-VIDEO (Y/C) OUT Y/C separated signal looping output 3. S-VIDEO (Y/C) IN Y/C separated signal input 4.
Connecting the Monitor 6. VIDEO 2(AV2) OUT Composite signal Output for AV2 7. VIDEO 2(AV2) IN Composite signal Input for AV2 8. VIDEO 1(AV1) OUT Video looping Output for AV1 9. VIDEO 1(AV1) IN Composite signal Input for AV1 10. D-SUB IN PC Signal Input 11.
e-Series LCD Monitor User Manual Remote Controller Figure 4 1 Remote Control 2 1. POWER Turns the power ON or OFF. There may be a few seconds delay before the display appears. 2. SOURCE Select PC or Video (PC/AV1/AV2/S-Video) 3. MUTE Mutes the sound. 4. MENU Activates and exits the On Screen Display (OSD). 5. VOL Move to OSD menu. Increases or decreases the level of audio volume. (Sound Option) 6. UP/DOWN Move to OSD menu. When down key is pressed on the main menu. 7.
Mounting the Monitor Mounting the Monitor Figure 5 14 Back of the LCD monitor and mounting
e-Series LCD Monitor User Manual Controls and Functions Front Panel Controls The options available on the front of the LCD monitor mirror those of the remote control. Figure 6 Document 800-00718 Rev A 07/07 Front controls 1. SOURCE Selects the input source and moves from the previous menu. 2. MENU Activates and exits the On Screen Display (OSD). It can also be used to move from the previous menu or status. OSD Menu(MAIN): Input Source, Screen, Audio, OSD, Color, Utility, Exit. 3.
Controls and Functions OSD Menu Input Source: Select PC, AV1, AV2 or SVIDEO Figure 7 Input Source Screen: Figure 8 Screen settings Brightness Increase or decrease the intensity of the image. Contrast Increase or decrease the intensity (lightness or dimness) of the image. H. position (PC Mode Only) Move image horizontally on screen right or left. V. position (PC Mode Only) Move image vertically on screen up or down. Clock (PC Mode Only) Adjust the vertical noise of screen image.
e-Series LCD Monitor User Manual Phase (PC Mode Only) Adjust the number of horizontal picture elements. Audio: Figure 9 Audio settings Volume Adjust audio volume. OSD: Figure 10 OSD (On Screen Display) settings H. Position Move the OSD position to right('X') or left('W'). V. Position Move the OSD position to up('▲') or down('▼'). Transparency Select the OSD background. OSD Timer Select the OSD display timing. Language Select a language among English, Français, Deutsch, Español, Danish, Italiano.
Controls and Functions Color (PC Mode): Figure 11 Color settings Color Temp Adjust color temperature to 9300, 6500, user. (note : 9300 is factory default) Red Adjust red color for user. Green Adjust green color for user. Blue Adjust blue color for user. Utility: Figure 12 Utility settings Recall Select to reset all setting to the factory default values. Lock Select ON or OFF (ON : Control key lock. OFF : Control key unlock) Exit Turn off OSD menu.
e-Series LCD Monitor User Manual TV Utility: Figure 13 TV Utility settings Exit Turn off OSD menu.
D-Sub Connector Pin Assignments D-Sub Connector Pin Assignments Figure 14 D-Sub connector pins Table 1 D-SUB Pin Settings Pin Description 1 Red Video 2 Green Video 3 Blue Video 4 Ground 5 Ground 6 Red Ground 7 Green Ground 8 Blue Ground 9 20 10 Signal Cable Detect 11 Ground 12 SDA (for DDC) 13 H-SYNC (or H+V SYNC) 14 V-SYNC 15 SCL (for DDC)
e-Series LCD Monitor User Manual Power Management This LCD monitor features a power management system to power down upon receipt of a VESA DPMS (Display Power Management Signaling) from a VESA DPMS video card. This monitor enters an appropriate mode through identifying each of the three modes of the signaling system.The stage that the power management system is in is indicated by the LED on the monitor.
Specifications and Parts Specifications and Parts Table 4 Specifications list Parameter Description LCD Type Diagonal AM-TFT(Active-Matrix) Pixel pitch(mm): 0.264(H) 0.264(V) Brightness: 300cd/m2(Typical) Contrast Ratio: 1000:1(Typical) Viewing Angle: 160(H) x 160(V) Response Time: 5msec(Typical) Resolution (H x V) 1280 x 1024 @ 60Hz Frequency Horizontal: 31-64KHz Vertical: 56-75Hz Input Signal Video(2ch input 1.
e-Series LCD Monitor User Manual Table 5 Parts list Part Quantity Stereo Cable 1 VGA Cable 1 Power Adapter 1 User Manual 1 Note: technical specifications and parts are subject to change without notice.
Troubleshooting Troubleshooting Issue: No image is displayed on screen. Possible • Solution: • • Issue: ’Going to Sleep’ message displayed on screen. Possible • Solution: • Issue: Check that the power cord has been connected securely into the wall outlet or grounded extension cable or surge protector. Power switch should be in the ON position and the LED should be lit. Check that the Brightness and the Contrast adjustments have not been turned down to the minimum levels.
NOTES:
Honeywell Video Systems (Head Office) 2700 Blankenbaker Pkwy, Suite 150 Louisville, KY 40299, USA www.honeywellvideo.com ℡ +1.800.796.2288 Honeywell Video Systems Northern Europe Netwerk 121 1446 WV Purmerend, The Netherlands www.SecurityHouse.nl ℡ +31.299.410.200 Honeywell Security Australia Pty Ltd. Unit 5, Riverside Centre, 24-28 River Road West Parramatta, NSW 2150, Australia www.ademco.com.au ℡ +61.2.8837.9300 Honeywell Video Systems UK Ltd.