for the safety and happiness of your home Home System HS-6270 User's Manual To get the best use of the product, please read the user's manual carefully before using the product. Keep the user's manual at an easily accessible place and make it available to the next user. The specification of product picture may vary the model.
Accessing the fire/gas control test mode Press , Press , Press , to shift to fire test mode. Press , to shift to gas test mode. ※ Refer to page 16 for more details.
Contents Safety Precautions 2 Usage Suggestions 5 Parts of HS-6270 6 Function Setting Adjusting the Volume of the Bell Setting the Safety Zone 7 7 7 8 Setting, Changing, and Checking the Exit/Entry Delay 9 Adjusting the Brightness of the Screen Adjusting the Volume of the Phone Setting, Changing, Deleting, and Checking the Password 10 Phone Call Function Telephone Function Answering the Phone Making a Phone Call 11 11 Interphone Function Answering the Interphone 12 12 Making a Call over th
Safety precautions To prevent property damage, make sure you have read the "Safety Precautions" before using your system. The following symbols denote the degree of damage that may arise in case of failure to follow the specified precautions. Warning Indicates the serious damage or even loss of life that may result from failure to follow instructions. Caution Refers to injury or property damage that may result from failure to follow instructions.
Safety precautions Warning Keep the product away from moisture (contact with moisture or other liquids may cause fire, electric shock, or malfunction). Do not disassemble or modify the product (may lead to electric shock, fire, or malfunction). If the panel comes into contact with water, unplug the cord immediately to avoid electric shock or fire. Do not use the product in places exposed to inflammable gases or debris such as propane gas or gasoline (may cause explosion or fire).
Safety precautions Caution Do not use benzene or other volatile substances (may damage the product). Keep out of reach of children (product may cause injury). Do not place the product near large TV's or speakers that generate strong magnetic forces (may cause malfunction). Child users should be instructed on the product's proper use. Adult supervision is recommended to avoid injury. Do not install on an unstable location (may get detached and result in breakdown or injury).
Usage suggestions To get the best use of the product, take note of the following. 1. When using the gas alarm and/or fire sensor, follow the manufacturer's instructions. 2. Make sure that the product is impervious to volatile gases to avoid sounding the fire alarm by mistake. 3. In case of product breakdown, do not disassemble the body or sensor. Contact the vendor. 4. In case the main panel goes out of order, contact the vendor. 5. Use the emergency button only when necessary. 6.
Parts of HS-6270 Parts of the control panel Fire/Gas Lamp Signals a fire/gas alarm. LCD Shows an image of the entrance. Function Lamp Indicates the function setting status. Safety Zone Lamp Indicates the Safety Zone and Burglar Alarm states. Power Lamp Away Button/Lamp Sets your home to away mode and indicates that the system is in away status. Speaker Emergency Button/Lamp Used in case of emergencies; indicates the emergency status. Talk Button/Lamp Used when talking over the telephone and interphone.
Function Setting Adjusting the Volume of the Bell 1. Press the button. 2. Press . 3. Press (low), (medium), or (high) to adjust the volume level. 4. To end the function setting menu, press the button. Adjusting the Brightness of the Screen 1. Press the 2. Press 3. Press button. . (dark), (medium), or (bright) to adjust the brightness level. 4. To go to another function setting menu, press 5. To end the function setting menu, press the . button. Adjusting the Volume of the Phone 1.
Function Setting Setting the Safety Zone ※ When activating the security system, you can set the Safety Zone. 1. Press the 2. Press button. . 3. Press (Safety Zone 1), (Safety Zone 2), (Safety Zone 3), or (Safety Zone 4), then the corresponding safety zone lamp blinks. Press it again to turn off. Pressing the corresponding safety zone button causes the safety zone to be set (not monitored: safety zone lamp blinks; monitored: safety zone lamp goes out). 4. To go to another function setting menu, press 5.
Function Setting Setting, changing, and checking the exit/entry delay ※ You can set the delay time for activating your security system for exit/entry. ※ Exit Delay refers to the time given by the system to let you exit the house before the system is activated. ※ Entry Delay refers to the time given by the system to let you deactivate the system after entering the house. ※ Optional function; may not be available in some models. [ Setting and changing the entry/exit delay ] 1. Press the 2. Press the .
Function Setting Setting, Changing, Deleting, and Checking the Password ※ One household can have up to four passwords. ※ Be sure to remember the password for deactivating the security system and alarm. [Setting/Changing the Password] 1. Press the 2. Press button. . 3. Enter the password (four digits). 4. Press . 5. To save the password to ( ~ ), press the corresponding button. 6. To continue entering passwords, start with the step 3. To check the password you entered, go to [Checking Password] 3.
Phonecall function Telephone function ※ Optional function; may not be available in some models. [ Answering the phone ] 1. The phone bell rings/the talk lamp blinks. 2. Pressing (Talk) causes the talk lamp to light up. 3. You are now ready talk to the caller. [ Making a phone call ] 1. Pressing (Talk) causes the talk lamp to light up. 2. Dial the number to make your call. To hang up, press (Talk) . Talking to someone at the Door [ Taking calls from the Door ] 1.
Phonecall function Interphone function [Answering the interphone] 1. The interphone bell rings/the talk lamp blinks. button causes the talk lamp to light up. 2. Pressing the (Talk) 3. Talk to the person on the other flat. [ Making a call over the interphone ] button. 1. Press the (Talk) 2. You will hear the dial tone after pressing the button. 3. Press the address number of the flat you want to call. ex) Making a call to Apt. no.
Phonecall function Talking to someone at the common entrance [ Taking calls from the common entrance ] 1. The common entrance bell rings/the guard lamp blinks/the image is shown on the screen. 2. Pressing the (Guard ) button causes the guard lamp to light up. 3.Talk to the visitor. To stop talking, press the (Guard ) button. You have three minutes to talk to the person at the common entrance before the line is automatically terminated.
Security and Alarm Functions Away Mode ※ Away Mode, You can activate the security system when leaving the house. 1. Press [Away]. 2. Press . The Away lamp and Safety Zone lamp for monitoring are then lit. Message: "Security system is activated." Away warning sound of "toot-toot" is then heard. During setting, the away mode is not set if the security zone except the entrance door and living room is breached (or sensed).
Security and Alarm Functions Room Mode (deactivating the away and sleep modes) ※ You can deactivate the security system. 1. Input the "four- digit password" + + . Message: "The security system is deactivated." When you open the entrance door while the Exit or Sleep mode is activated, the security system is disabled during the previously set entrance delay time with the warning alarm ("toot-toot" sound).
Security and Alarm Functions Deactivating the Emergency Alarm 1. Enter the password. 2. To turn off the warning sound, press the stop button. 3. To deactivate the alarm completely, press the return button. You need to finish your call or monitoring first to deactivate the alarm while talking on the phone or monitoring the entrance. Caution If the gas leak or cause of fire is not removed completely, the alarm is activated again.
Electronic Bullet Board Function Electronic Bullet Board Function [View Info Title] 1. Press the button and then press to display the information title. 2. The title shows 20 letters at the first part of the information. [View Info Content] 1. Press the No. , ~ , on the title menu of the information. 2. To select the 10th one on the Information No., Press . 3. It displays “Loading---” at first during reading the information , then turn to the menu, finally the information content. 4.
Saving Image Function To Modify Time 1 Press [Door] + to go to SET UP MODE in Time Modify. 2 Press to remove the cursor to the modify position. 3 Press to increase the value, press to decrease the value. After the time check, press to remove the cursor to the position to modify. 4 To exit fromTime Setup Mode , press . 2009.04.06 10:00:30 To Record the image of the visitor 1 When the visitor is calling at entrance or pressing the entrance monitor, press to start recording.
Using the camera Parts of the camera Microphone Used to talk to someone at the entrance. Camera lens HOME SYSTEM COLOR DOORPHONE HC-6000 CALL Speaker When you are talking to someone at the entrance, your voice will be heard outside. Call button Used when calling your neighbor. The camera is subject to change without prior notice.
Troubleshooting Please check the manual before reporting a malfunction. Check the list below before requesting for repair. Symptom Check the following The panel is not working. Is the red light on the control panel turned on? (Check the power) The screen is fuzzy. Is the brightness setting appropriate? (Check the menu) Are there stains in the screen and camera lens? Reference Is there moisture in the camera? The alarm has been activated and cannot be deactivated even after pressing the reset button.
Product specifications Product specifications The appearance and specific atio ns in the user's manual may be changed with out prior notic e for product improvement purposes. Electrical specifications and characteristics Classification Control panel Camera Power voltage 220V AC DC 12V Dimensions(mm) 296 x 205 x 47 120 x 120 x 39 Weight Approx. 1100 g Approx. 200g Temperature -10 ~ 40℃ -10 ~ 40℃ Surrounding humidity 0 ~ 80% 0 ~ 80% Normal Power consumption Maximum 5W 0.2W 25W 2.
Product warranty Product warranty Model HS-6270 Date of purchase Warranty period 1 year Product serial number Store of purchase ※ This product has gone through strict quality inspections prior delivery. ※ hMalfunction during use shall be repaired by the designated service or call center. Warranty rules ※ Malfunctions occurring during normal use and within the warranty period shall be repaired free of charge.
Honeywell Security & Data Collection For more information: Asia Pacific Headquarters Tel:(86)21-5257 4568 Australia Tel:(61)1300 368 755 China Tel:(86)755-2518 1226 Hong Kong Tel:(852)2405 2323 India Tel:(91)124 5105671 Korea Tel:(82)2-799 6109 Singapore Tel:(65)6333 9563 Tainwan Tel:(886)2-2245 1000 www.asia.security.honeywell.com security.ap@ honeywell.com Automation & Control Solutions Honeywell Security-Asia Pacific Honeywell International Inc. www.security.honeywell.
The location of the lamps and specifications as shown in the picture above may vary slightly from the actual product. The World's Best Customer Service! We at Honeywell provide the world's best customer service to enable our customers to enjoy a convenient and happy life. The contents of this user's manual are subject to change without prior notice. Automation&Control Solutions Honeywell Security-Asia Pacific Honeywell International Inc. www.security.honeywell.