user manual

– 11 –
SYSTEM OVERVIEW
SYSTEM OVERVIEWSYSTEM OVERVIEW
SYSTEM OVERVIEW
About the Touch screen Control
Note: The system functions described below are for reference only and require additional key entries to
activate.
Index Item Description
1 Display
Window
Color Liquid Crystal Display (LCD) Touch screen. Displays system status icons,
time, system status information, user menus and the virtual keypad.
2
Ready LED
Indicator
(Green)
ON = System is ready to be armed
OFF = System is armed
Blinking = System is disarmed, and not ready to be armed (a fault exists)
Blinking alternately with Ready LED = Speaker phone mode is active
3 Home key Used to exit from a screen or return to the home screen.
4 Speaker Source of audible internal warning and confirmation sounds, status announce-
ments, as well as alarms (see "Summary of Audible Notifications").
5 Off
(Disarm)
key
Initiates the disarm process and causes a keypad to be displayed on the touch
screen. Disarms the burglary portion of the system, silences alarms and audible
trouble indicators, and clears alarm trouble display after the problem has been
corrected.
6 Away key Completely arms both perimeter and interior burglary protection for backup
protection by sensing an intruder's movements through protected interior areas
as well as guarding protected doors, windows, etc. Entrance can be made
through an entry delay zone without causing an alarm if the system is disarmed
before the entry delay time expires.
7 Panic key When depressed for 4 seconds, the virtual panic icons are displayed on the
touch screen.
8 Microphone Used to record personal messages via the Message Center, and for two-way
voice and speaker phone operation.
9
Armed LED
Indicator
(Red)
ON = System is armed (STAY or AWAY)
OFF = System is disarmed
Blinking = System armed, and an alarm or fault has occurred.
Blinking alternately with Ready LED = Speaker phone mode is active