user manual

– 32 –

SECURING THE PREMISES

SECURING THE PREMISESSECURING THE PREMISES

SECURING THE PREMISES

Chime Mode

Your system can be set to provide you with an audible alert of the opening of a door, while it

is disarmed, by using Chime mode. When activated, three beeps will sound at the control

whenever a protected perimeter door is opened and the zone voice descriptor will be

announced, if programmed. Additionally, the faulted zone information will be displayed on

the home screen. Selecting the “Zones” icon displays the open protection points. The Chime

mode can be turned on only when the system is disarmed.

Turning Chime Mode On or Off

Arm Away

Ready To Arm

DashboardArm Stay

BackDelay

Settings

10:18 AM June 8, 2010

5100-100-003-V0

Tools

1. With the system in the disarmed or armed

state, select the “Settings” icon from the

second page of the Home Screen. The

system displays the Settings screen.

Ready To Arm

RingerChimeVoice

Brightness

Contrast

Volume

5100-100-088-V0

Save

Clean

2. Select the “Chime” icon. The system toggles

between “Off” and “On”. When “On” is

selected, the Chime mode will be active.

3. Select the “Save” button to save your new

settings.