user manual

– 48 –
USER FUNCTIONS
USER FUNCTIONSUSER FUNCTIONS
USER FUNCTIONS
Automation
5100-100-007-V0
RulesSwitches
Schedules
Scenes
Locks
Tools
Thermostat
68
Ready To Arm
2. Select the “Rules” button. The system displays
the Rules screen.
Ready To Arm
5100-100-070-V0
Rules 1
New
Edit Delete
Rules 3
New
Rules 5
New
Rules 2
New
Rules 4
New
Rules 6
New
4. Select a “Rules” key followed by the Edit
button. The system displays a keyboard.
Note: Rules 21-40 are only accessible through
TotalConnect Service.
Ready To Arm
5000-100-190-V0
Clear
Done
ABC...
4. If desired you can enter a Rule Name. Select
the “Clear” key and then enter up to 13
characters of text.
Note: Select the “ABC…” key to switch the keyboard
between upper/lower case or the “123!@#” key to
switch to numbers.
5. Once you are finished, select “Done”. The
system returns to the Rules screen.
Ready To Arm
5000-100-188-V0
Name
Save
Type
Disabled
01
6. Select the “Type” button. Dependant upon what
features are programmed in your control the
system toggles between the following Types:
Disabled
Trigger Output
Scene
(displayed when Z-Wave has been enabled)
To Ph. 1 (Message to Phone 1)
To Ph. 2 (Message to Phone 2)
To Ph. 1 & 2 (Message to Phone 1 & 2)
Email 1
Depending upon the Type selected, the system
displays several new programming fields.