user manual

– 51 –
USER FUNCTIONS
USER FUNCTIONSUSER FUNCTIONS
USER FUNCTIONS
Automation
Ready To Arm
5000-100-192-V0
Save
Third Start Zone
Disabled
First Start Zone
Disabled
Second Start Zone
Disabled
Zone Number Operation
Fault
Third Stop Zone
Disabled
First Stop Zone
Disabled
Second Stop Zone
Disabled
OR
Ready To Arm
5100-100-069-V0
Save
Third Zone Fault
Disabled
First Zone Fault
Disabled
Second Zone Fault
Disabled
Zone Number Operation
Fault
Third Zone Restore
Disabled
First Zone Restore
Disabled
Second Zone Restore
Disabled
13. Select the First, Second or Third “Start Zone” or
“Zone Fault” (The name of this field is
dependant upon the “Type” that was selected in
Step 6.) Select the Zone from the list displayed
by the system.
14. Select the First, Second or Third “Stop Zone” or
“Restore Zone” (The name of this field is
dependant upon the “Type” that was selected in
Step 6.) Select the Zone from the list displayed
by the system.
15. Select “Save” when programming is complete.
16. Select the “2” button. The system returns to
the Automation programming screen.
Editing or Deleting Rules
Ready To Arm
5000-100-194-V0
Device 1
System Armed
Follow Me
Edit Delete
Device 3
New
Device 5
New
Device 2
New
Device 4
New
Device 6
New
1. At the Rules Programming Screen, select the
Rule that you wish to edit or delete.
Note: Rules 21-40 are only accessible through
TotalConnect Service.
2. To delete the rule, select the Delete button. To
edit the rule select the Edit button and proceed
to step 3.
Ready To Arm
5000-100-195-V0
Name
System Armed
Save
Type
Message to phone 1
01
Start Zone Type
Not Used
Start System Operation
Armed Stay
Action
Send
Stop Zone Type
Not Used
Stop System Operation
Disarm
3. Select the field that you wish to edit and follow
the steps as outlined in the Programming Rules
procedure.