User's Manual
Table Of Contents
- Warnings and Safeguards
- Contents
- Introduction
- Installation
- Setup
- Operation
- Remote Software
- Play Controls
- Performing a Basic Search
- Adjust the Brightness of an Image
- Zooming in on an Image
- Zooming in on a Portion of an Image
- Printing an Image
- Save Clip
- Status Search
- PTZ Overview
- Web Viewer Overview
- Alarm Monitor
- Digital Verifier Overview
- FVMS (option) Overview
- Appendix
- Button Index
- DVR FAQ
- Troubleshooting
- Specifications (HRDP H.264)
- Specifications (HRDPX H.264)
HRDP DVR User Guide
______________________________________________________________________________________________
Document 800-06801 Rev D 55
02/11
E-mail Configuration
The DVR can send an email notification to up to six defined e-mail addresses
when an event happens.
E-MAIL SERVER – DVR/SMTP [Configure the DVR to use selected e-mail
server.]
OPTION –Define the type of event that will trigger an e-mail notification.
MOTION – After a motion alarm is triggered.
SENSOR – After a sensor alarm is triggered.
VIDEO LOSS – After video loss on a camera.
POWER – When the DVR is shutdown and restarted.
SETUP – When a user accesses Setup.
LOG IN – When a user logs in.
LOGIN FAIL – After three failed login attempts.
DISK FULL – When the HDD reaches the user-defined maximum
disk full percentage. See DISK MANAGEMENT – OVERWRITE.
SMART – When the HDD reaches the user-defined maximum
temperature. See DISK MANAGEMENT – SMART.
PIC – ON / OFF [Enable to send a picture of the event.]
E-MAIL ADDRESS – Enter the e-mail address.