User's Manual
Table Of Contents
- Warnings and Safeguards
- Contents
- Introduction
- Installation
- Setup
- Operation
- Remote Software
- Play Controls
- Performing a Basic Search
- Adjust the Brightness of an Image
- Zooming in on an Image
- Zooming in on a Portion of an Image
- Printing an Image
- Save Clip
- Status Search
- PTZ Overview
- Web Viewer Overview
- Alarm Monitor
- Digital Verifier Overview
- FVMS (option) Overview
- Appendix
- Button Index
- DVR FAQ
- Troubleshooting
- Specifications (HRDP H.264)
- Specifications (HRDPX H.264)
Operation
______________________________________________________________________________________________
64
PTZ
To enter PTZ mode:
• Right-click the Live screen and select PTZ on the pop-up menu, or
• Click the PTZ icon on the Tool menu on the bottom of the main
screen.
Drag the mouse up/down or left/right to move pan/tilt position of the camera.
As you move the mouse away from the center of the screen, the camera
movement speed increases. You can also zoom-in/out by using the scroll
wheel on the mouse.
Note Full PTZ functions are available using the front panel buttons, a
mouse, the IR remote control, or a keyboard controller.
PTZ Popup Menu
Right-click the desired camera to open the PTZ Popup menu while in PTZ
mode.
Arrow Buttons – Move Camera
M – Open camera’s on screen display menu (dependant on camera model
support, see your camera’s manual for information)
ZOOM – Zoom in/out on PTZ camera. Enabled by default in PTZ mode
FOCUS – Adjust focus on PTZ camera.
IRIS – Adjust the iris on PTZ camera.
PRESET – Go to preset position. Select the preset number. The maximum
preset number is 255
PRESET TOUR – Start preset tour. PRESET TOUR will sequence though all
preset positions. Can only be enabled while in full screen mode.