User's Manual
Table Of Contents
- Warnings and Safeguards
- Contents
- Introduction
- Installation
- Setup
- Operation
- Remote Software
- Play Controls
- Performing a Basic Search
- Adjust the Brightness of an Image
- Zooming in on an Image
- Zooming in on a Portion of an Image
- Printing an Image
- Save Clip
- Status Search
- PTZ Overview
- Web Viewer Overview
- Alarm Monitor
- Digital Verifier Overview
- FVMS (option) Overview
- Appendix
- Button Index
- DVR FAQ
- Troubleshooting
- Specifications (HRDP H.264)
- Specifications (HRDPX H.264)
Setup
______________________________________________________________________________________________
44
SENSOR
Orange
SENSOR-activated recording
In sensor mode, the DVR will record when a sensor is
triggered - during DURATION time as set in RECORD >
MOTION /EVENT CONFGURATION > ACTION.
CONT+MOT
Sky Blue
CONTINUOUS + MOTION detection recording
The DVR records in CONTINUOUS mode but switches
toMOTION when motion is detected in the motion area.
The DVR also will log a Motion Event and send the event
to the Remote Monitoring software.
If you set motion to OFF in RECORD > MOTION /EVENT
CONFGURATION and set CONT + MOT in SETUP >
RECORD > SCHEDULE the DVR will NOTrecord when
motion is detected.
CONT+SENS
Brown
CONTINUOUS + SENSOR-activated recording
In this mode, the DVR records continuously and switches
to SENSOR recording mode when a sensor is triggered.
The DVR also will log a Sensor Event and send the event
to the Remote Monitoring software.
MOT+SENS
Lilac
MOTION detection + SENSOR-activated recording
The DVR will only record when motion is detected or a
sensor is triggered.