User's Manual
Table Of Contents
- Warnings and Safeguards
- Contents
- Introduction
- Installation
- Setup
- Operation
- Remote Software
- Play Controls
- Performing a Basic Search
- Adjust the Brightness of an Image
- Zooming in on an Image
- Zooming in on a Portion of an Image
- Printing an Image
- Save Clip
- Status Search
- PTZ Overview
- Web Viewer Overview
- Alarm Monitor
- Digital Verifier Overview
- FVMS (option) Overview
- Appendix
- Button Index
- DVR FAQ
- Troubleshooting
- Specifications (HRDP H.264)
- Specifications (HRDPX H.264)
![](/manual/honeywell/honeywell-dvr-hrdpx/user-s-manual-english/images/img-57.png)
HRDP DVR User Guide
______________________________________________________________________________________________
Document 800-06801 Rev D 69
02/11
Backup (Export)
Manual Export
Back up recorded data on a CD-RW, DVD-RW or connected USB device.
Tip Refer to the USB Flash Drive Approved List in the Introduction
chapter.
To configure a data backup:
1. Press BACKUP on the front panel or remote control.
or
Click MENU on the hover menu and select BACKUP.
2. Connect a USB device or insert a CD/DVD.
Note The DVR supports DVD+R, and DVD-R. DVD-RW/+RW may not
operate correctly.
3. Select SCAN to locate the device.
Caution If you are using a new USB device to back up your data, you must
format it first as FAT32.
4. Select the desired CAMERAs and the FROM and TO time for the backup.
5. Select ESTIMATE to display estimated data size and free space available.