Day/Night DNS Fixed Dome Camera NTSC / PAL HD4D HD4DX User Guide Document 800-00023 – Rev D – 05/07
Revisions Issue Date Revisions A 04/07 New document. B 05/07 Increase line weight of illustrations. C 05/07 Corrected specifications. D 06/07 Changes: Page 14, LL switch is on power supply board. Page 18, corrected Day/Night mode explanation. Page 24, corrected Vertical Phase Adjustment to 0 - 359°.
Warnings Installation and servicing should be performed only by qualified and experienced technicians to conform to all local codes and to maintain your warranty. WARNING! 12 VDC/24 VAC models require the use of CSA Certified/UL Listed Class 2 power adapters to ensure compliance with electrical safety standards. WEEE (Waste Electrical and Electronic Equipment). Correct disposal of this product (applicable in the European Union and other European countries with separate collection systems).
FCC Compliance Statement Information to the User: This equipment has been tested and found to comply with the limits for a Class A digital device. Pursuant to Part 15 of the FCC Rules, these limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Unpack Everything. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Equipment Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Mounting the Camera . . . .
Introduction The unobtrusive, low-profile design of the HD4D CCTV Camera is ideal for indoor and outdoor installations in commercial and residential venues. Before You Begin Please read this guide carefully before you install the HD4D CCTV Camera. Keep this guide for future reference. Unpack Everything Check that the items received match those listed on the order form and packing slip.
Installation The HD4D is weather-sealed for indoor or outdoor locations. The HD4D is a fully-integrated enclosure with camera and lens. The wiring can be completely concealed to reduce the risk of tampering.
Mounting the Camera The HD4D Camera is designed to be surface mounted on a wall or ceiling. Before you mount the camera, use the mounting template provided to mark and pre-drill the holes. Connecting Cables Through the Housing Base For installations requiring pulling cables through the grommet located in the bottom of the base: 1. 2. 3. Use a sharp knife to cut an ! opening in the base gasket (see the figure below). Be careful. The opening should only be big enough to feed the cable assembly through.
Connecting Cables Through the Side Conduit 1. 2. 3. 4. 5. Peel back the bottom flat gasket below the side conduit just enough to expose the security screw. Use the Allen key supplied to loosen and remove the security screw (see below). Use a flat screwdriver to unscrew the conduit plug. Pull the cabling through the hole. Apply appropriate sealant around the opening to prevent moisture from entering the housing.
Electrical Box Installations Figure 2 illustrates how to mount the HD4D directly to a 4S electrical box or directly to wall or ceiling. For 4S electrical box installations, the optional adapter plate can be used to cover ceiling or wall imperfections around the electrical box opening.
Figure 3 illustrates how to mount the HD4D directly to a double gang or single gang electrical box.
Connecting the Wiring Follow Figure 4 for the wiring connection. Figure 4 Wiring Connection Note Video: female BNC (yellow) + Red Power: 12 VDC or 24 VAC 12 - Black For secure installations, surface mounted cables should be protected by plastic or metal cable covers.
Adjusting the Camera To adjust the HD4D Camera: 1. 2. 3. 4. Apply 12 VDC or 24 VAC power to the camera and monitor the video signal. Loosen the screws that lock the gimbal assembly in place (see Figure 5). Adjust the camera carrier to the desired view. Tighten the screws to lock the gimbal assembly in place. Note Orient the camera as shown in Figure 5 to maintain the correct picture orientation. Figure 5 Gimbal Adjustment Top view Angle view Locking screw. Loosen to adjust Horizontal (B).
Line Lock The Line Lock switch on the power supply board must be left in the ON position. To switch between Line Lock and Internal Lock, use the OSD menu (see Sync Control Setup, page 19). Adjusting the Lens Focus Lenses are pre-focused at the factory but may require a final adjustment after installation in the unlikely event the optical effect of the dome causes a slight defocusing of the lens. TECH TIP! To check the focus, hold the dome over the lens while making any adjustments.
Camera Settings Camera Functions Figure 6 Camera Controller Legend 2 # Description 1 Video-test monitor output connector 2 Camera OSD control (four position plus center push) LF DN Press this control To do this RT UP, DOWN Select a new item LEFT, RIGHT Select a menu item SETUP (MENU) (CENTER PUSH) Enter SETUP MENU, access a submenu 1 Document 800-00023 Rev D 05/07 15
OSD Menu Structure The HD4D camera menu system consists of one main setup menu for easy programming. Main MENU SETUP MENU Sub-Menus 1 2 3 4 5 6 7 8 LENS SHUTTER WHITE BAL.
SETUP Menu Menu Item Option Description LENS DC! VIDEO MANUAL Selects Lens type. Only DC mode is supported at this time. Caution Selecting VIDEO or MANUAL adversely affects camera operation. FLK MANUAL! ESC! Adjusts shutter settings. WHITE BAL (White Balance) ATW MANUAL! AWC! Controls color on the screen. BACKLIGHT OFF LOW MIDDLE HIGH Provides light level control to overcome severe backlighting conditions. AGC OFF LOW! MIDDLE! HIGH! Adjusts value of AGC (Automatic Gain Control).
SPECIAL Menu On the main SETUP menu: 1. 2. Press UP or DOWN and then select SPECIAL. Push SETUP (MENU) to access the SPECIAL menu. Menu Item Option Description 1 CAMERA ID OFF ON Turns ID display off and on. To add a camera title (name and/or number) to be displayed on the screen, see Adding a Camera Title Display. 2 DAY/NIGHT AUTO COLOR BW When set to AUTO , the camera automatically switches to Night mode (B/W) when the light level is low. When set to COLOR, the camera stays in Day mode (Color).
Adding a Camera Title Display On the SPECIAL menu, select CAMERA ID, then press SETUP (MENU).. 1. 2. 3. 4. Press the menu control UP, DOWN, LEFT, or RIGHT to select a character, then press (SETUP) MENU to accept it. The character is saved and the title cursor at the bottom of the screen moves to the next position. Use the # $ symbols to go backward or forward in the title name/number to make changes. Select CLR to delete the entire title and start again. Repeat step 1 until your camera title is complete.
Motion Detection Setup On the SPECIAL menu, select MOTION DET, then press SETUP (MENU). Menu Item Option Description AREA SEL AREA 1 AREA 2 AREA 3 AREA 4 Select which of the four motion detection grids top left, top right, bottom left, bottom right) you would like to modify. AREA STATE ON OFF Choose whether to activate or deactivate the selected grid. Press LEFT or RIGHT control to alter the dimensions of the selected grid.
Installing the Enclosure Cover To install the enclosure cover, use the Allen key (supplied) to secure the HD4D dome enclosure to the base with four #8-32 security screws. Figure 7 Enclosure Cover Installation HD4D dome enclosure #8-32 security screws (x4) Routine Maintenance Use regular liquid cleaners to remove dirt and grime from the HD4VC4HR dome. Caution Do not use harsh or abrasive cleaners which can scratch the polycarbonate dome and reduce visibility for the camera.
Solving Common Technical Issues No Video ❐ Check that the power supply voltage is within the operating specifications for your camera model. See Specifications for details. ❐ Check the video signal connections are correct. ❐ Check for a loose connection. Fuzzy Video ❐ Check the video ground connections. ❐ Check for ground loops. Call Honeywell Technical Support for additional assistance (see Warranty and Service).
Warranty and Service Subject to the terms and conditions listed on the Product warranty, during the warranty period Honeywell will repair or replace, at its sole option, free of charge, any defective products returned prepaid. In the event you have a problem with any Honeywell product, please call Customer Service at 1.800.796.CCTV for assistance or to request a Return Merchandise Authorization (RMA) number.
Specifications Video Signal Specifications Pickup device: 1/3 in. Sony Interline CCD sensor Synchronization system: 12 VDC: Internal / 24 VAC: (Internal or Line lock) Vertical phase adjustment: Adjustable, 0° - 359°, OSD control Horizontal resolution: 540 TV lines Lens type: 3.3 - 12 mm Vari-focal Auto Iris, IR Corrected F1.5, DC Drive Minimum illumination response: 0.3 lux @ F1.5 (Color) 0.03 lux @ F1.
Format Specifications NTSC PAL Color video signal format: Standard Standard Effective picture elements: 768 (H) x 494 (V) 752 (H) x 582 (V) Scanning system (2:1 interlace): 525 lines, 60 fields/sec. Electronic shutter: 625 lines, 50 fields/sec. 1/60 - 1/120,000 second 1/50 - 1/120,000 second General Specifications Construction: Die cast (housing) Polycarbonate (dome) Finish: Gray/off white powder coating Dimensions (D) x (H): 5.5 in. x 3.6 in.(140.2 mm x 91.5 mm) Weight: 2.5 lb. (1.
Cable Guidelines Maximum Power Supply Cable Length (feet/meters) Cameras With AC/DC Power Supplies Wire gauge Total load Optional Power supply 2.5 W 15 VDC 260/79 415/126 1055/322 1680/512 2.5 W 24 VAC 608/185 980/299 2515/767 3930/1198 3.5 W 15 VDC 180/55 290/88 730/220 1170/352 3.5 W 24 VAC 470/143 760/232 1926/587 3065/934 24 AWG 22 AWG 18 AWG 16 AWG Note Calculations are based on an unregulated linear power supply, which would be the worst case.
HD4D/HD4DX Mounting Template Document 800-00023 Rev D 05/07 27
Honeywell Video Systems (Head Office) 2700 Blankenbaker Pkwy, Suite 150 Louisville, KY 40299, USA www.honeywellvideo.com ℡ +1.800.796.2288 Honeywell Video Systems Northern Europe Netwerk 121 1446 WV Purmerend, The Netherlands www.honeywell.com/security/nl ℡ +31.299.410.200 Honeywell Security Australia Pty Ltd. Unit 5, Riverside Centre, 24-28 River Road West Parramatta, NSW 2150, Australia www.honeywellsecurity.com/au ℡ +61.2.8837.9300 Honeywell Video Systems UK Ltd.