Operating Manual RTH2310 Programmable Thermostat 69-2229ES-05
CAUTION: EQUIPMENT DAMAGE HAZARD To prevent possible compressor damage, do not use Cooling mode when the outdoor temperature is below 50 °F (10 °C). Need Help? For assistance with this product please visit http://yourhome.honeywell.com or call Honeywell Customer Care toll-free at 1-800-468-1502. Read and save these instructions. ® U.S. Registered Trademark. Patents pending. © 2011 Honeywell International Inc. All rights reserved.
RTH2310 Programmable Thermostat Table of contents About your new thermostat Thermostat features ..................................... 2 Early Start..................................................... 3 Compressor protection ................................. 3 Quick reference to controls .......................... 4 Quick reference to display............................ 5 Quick start .................................................... 6 Programming & Operation Set the clock................................
Operating Manual About your new thermostat Your new Honeywell thermostat has been designed to give you many years of reliable service and easy-to-use, push-button climate control.
RTH2310 Programmable Thermostat Early Start Early Start allows the thermostat to “learn” how long your furnace or air conditioner takes to reach the set temperature. Simply program the desired times and desired temperatures into the schedule. The thermostat will determine when to activate heating or cooling so that the desired temperature is attained at the desired time. Example: If you set the Wake time to 6 a.m.
Operating Manual Quick reference to controls Battery compartment (for 2 AA batteries) Screen Lit for 12 seconds when you press the backlight button or any other button.
RTH2310 Programmable Thermostat Quick reference to display screen Day Current period number Appears when the thermostat is following the schedule (see temporary override on page 14 and permanent override on page 15) * Time Setpoint indicator Appears when the setpoint temperature is displayed. Temperature The ambient (measured) temperature is normally displayed. To view the setpoint temperature, press or once. The setpoint temperature will appear for 5 seconds.
Operating Manual This thermostat is ready to go Simply perform the three steps below and the thermostat is in operation: 1) Set the clock (see page 7) 2) Select whether to heat or cool (see page 8) 3) Select whether to keep the fan on continuously or only when needed (see page 9) This thermostat is pre-set with energy-saving program settings (see page 11).
RTH2310 Programmable Thermostat 69-2229S_A.fm Set the clock 1) Press Clk. The hour will flash. 2) Press 3) Press Clk. The minutes will flash. 4) Press 5) Press Clk. The day will flash. 6) Press 7) Press Exit. or or or Time and day display to set the hour. to set the minutes. Press to start time and day setting to set the day.
Operating Manual Select the system setting Use the System switch to place the system in one of the following modes: • Heat: System is in Heating mode. • Off: System is off. • Cool: System is in Cooling mode. NOTE: When you place the thermostat in Cooling mode, you might need to wait up to five minutes before cooling can start. This is a safety feature for the compressor. will flash on the screen until cooling starts.
RTH2310 Programmable Thermostat Select the fan setting Use the Fan switch to select the fan mode of operation. Auto The fan runs only when heating or cooling is activated. However, if you have a gas or fuel oil furnace, when heating is activated, the fan will start only when the air coming out of the vents is warm enough. The fan will keep on running after heating stops until the air is no longer warm enough. On The fan is always running.
Operating Manual Save money by using the schedule The thermostat automatically adjust its temperature setpoint according to the programmed schedule. You can program up to four periods per day, with different settings for weekdays and weekends. For example, you can program all four periods for the weekdays but only two periods (Wake and Sleep) for the weekends. Wake Set the time you wake up and the temperature you want in the morning until you leave (usually a comfortable level).
RTH2310 Programmable Thermostat Energy saving default schedule This thermostat is pre-set with energy-saving program settings. These settings can reduce your energy bills by 33%. See the next page if you wish to modify the settings. Weekdays Weekends Period Start time Heat Cool Start time Heat Cool Wake 6:00 am 70 °F (21 °C) 78 °F (25.5 °C) 6:00 am 70 °F (21 °C) 78 °F (25.5 °C) Leave 8:00 am 62 °F (16.5 °C) 85 °F (29.5 °C) -- -- -- Return 6:00 pm 70 °F (21 °C) 78 °F (25.
Operating Manual To modify the schedule 1) 2) 3) Press Pgm. The settings for period 1 for Monday through Friday are displayed. Press Day to switch between MO TU WE TH FR (Monday through Friday) and SA SU (Saturday and Sunday). NOTE: Press Day for 3 seconds to select all 7 days. To select another period, press P# until the desired period number is displayed. NOTE: To skip the displayed period, press Clr. For example, periods 2 and 3 have been skipped for Saturday and Sunday in the default schedule.
RTH2310 Programmable Thermostat To modify the schedule (cont’d) 4) While the time display is flashing, press or to set the time (in increments of 15 minutes). 5) 6) 7) Press P#. While the temperature display is flashing, place the System switch on Heat and press or to set the heat temperature. Place the System switch on Cool and press or to set the cool temperature. Repeat steps 2 to 6 to set another period. 8) Press Exit.
Operating Manual Temporary override of schedule To temporarily override the schedule, press or until the desired temperature is displayed. The period number will flash to indicate that the current period has been overridden. The new temperature will be used for the next 2 hours. Press to set the temperature NOTE: Pressing or once will display the setpoint temperature. To change the setpoint temperature, press either button more than once. Press the Mode button if you wish to cancel the temporary setting.
RTH2310 Programmable Thermostat Permanent override of schedule To permanently override the schedule, press the Mode button so that the period number disappears. Press or to manually set the temperature. Press the Mode button again if you wish to cancel the override and resume the schedule. The current period number will appear and the thermostat will be set to the temperature programmed for that period.
Operating Manual Filter replacement After 500 hours of heating or cooling time, an icon appears to indicate that the filter needs replacement. Once the filter is replaced, press the Filter button for 3 seconds to remove the icon and reset the counter.
RTH2310 Programmable Thermostat Battery replacement Set the System switch to Off before removing the batteries. Otherwise, the heating/cooling system might remain activated even when batteries are removed. Install two fresh AA batteries when the low-battery icon flashes on the screen. The icon will flash for 120 days, then the thermostat will cut power to the heating/cooling unit. The icon disappears once the batteries are replaced.
Operating Manual In case of difficulty Screen is blank. • Ensure two fresh AA alkaline batteries are correctly installed. Temperature settings cannot be changed. • You are setting the temperature outside its allowable range: • Heat: 41 °F to 82 °F (5 °C to 28 °C ) • Cool: 59 °F to 95 °F (15 °C to 35 °C) is flashing. • The compressor protection delay is underway. Wait for the delay to end (maximum of 5 minutes). HI appears on the screen. • The ambient (measured) temperature is above 122 °F (50 °C).
RTH2310 Programmable Thermostat Customer assistance For assistance with this product, please visit http://yourhome.honeywell.com. Or call Honeywell Customer Care toll-free at 1-800-468-1502. To save time, please note your model number and date code before calling.
Operating Manual 1-year limited warranty Honeywell warrants this product, excluding battery, to be free from defects in the workmanship or materials, under normal use and service, for a period of one (1) year from the date of purchase by the consumer. If at any time during the warranty period the product is determined to be defective or malfunctions, Honeywell shall repair or replace it (at Honeywell’s option).
Manual de Uso RTH2310 Termostato programable 69-2229ES-05
ADVERTENCIA: PELIGRO DE DAÑAR DEL EQUIPO Para prevenir el daño al compresor, no debe usarse el Modo aire acondicionado cuando la temperatura exterior es inferior a 50 °F (10 °C). ¿Necesita ayuda? Para obtener asistencia con este producto, sírvase visitar http://yourhome.honeywell.com o llame a la Asistencia al Cliente de Honeywell sin cargo al 1-800-468-1502. Lea y conserve estas instrucciones ® Marca registrada en EE.UU. Patente en trámite. © 2011 Honeywell International Inc.
Termostato programable RTH2310 Índice Sobre el nuevo termostato Características del termostato...................... 2 Encendido Anticipado................................... 3 Protección del compresor............................. 3 Referencia rápida de los controles............... 4 Referencia rápida de la pantalla................... 5 Puesta en marcha rápida ............................. 6 Programación y funcionamiento Ajuste del reloj..............................................
Manual de uso Sobre el nuevo termostato El nuevo termostato de Honeywell ha sido diseñado para brindar muchos años de servicio fiable y un control del ambiente fácil de usar con sólo apretar un botón.
Termostato programable RTH2310 Encendido Anticipado La función Encendido Anticipado le permite al termostato “aprender” cuánto tiempo necesita su calefactor o aire acondicionado para alcanzar la temperatura establecida. Sólo hay que programar las horas y las temperaturas deseadas en el horario. El termostato determinará cuándo activar la calefacción o el aire acondicionado de manera que la temperatura deseada se alcance a la hora fijada.
Manual de uso Referencia rápida de los controles Compartimiento de pilas (para 2 pilas AA) Pantalla Se ilumina 12 segundos cuando se presiona el botón de luz de fondo o cualquier otro botón.
Termostato programable RTH2310 Referencia rápida de la pantalla de visualización Día Hora Indicador de punto de ajuste Aparece cuando se visualiza el punto de ajuste. Período del horario Aparece cuando el termostato sigue el horario (ver cancelación temporaria en la página 14 y cancelación permanente en la página 15) Calefacción encendida Remplazar las pilas (ver página 14) * Temperatura Se visualiza normalmente la temperatura ambiente (medida).
Manual de uso El termostato está listo para funcionar Una vez cumplidas las tres etapas que se mencionan a continuación, el termostato estará listo para funcionar: 1) Ajustar la hora (ver página 7) 2) Seleccionar calor o frío (ver página 8) 3) Seleccionar si el ventilador funciona continuamente o solo cuando es necesario (ver página 9) Este termostato viene predeterminado con configuraciones para un programa de ahorro de energía (ver la página 11).
Termostato programable RTH2310 Ajuste del reloj 1) Presionar Clk. La hora parpadea. 2) Presionar o 3) Presionar Clk. Los minutos parpadean 4) Presionar o para fijar los minutos. 5) Presionar Clk. El día parpadea. 6) Presionar 7) Presionar Exit para salir. o Pantalla del día y la hora para fijar la hora. Presionar para comenzar la programación de la hora y el día para fijar el día.
Manual de uso Selección del sistema de ajustes Usar el conmutador de System para poner el sistema en uno de los modos siguientes: • Heat: el sistema está en Modo calefacción. • Off: el sistema está apagado. • Cool: el sistema está en Modo aire acondicionado. NOTA: cuando se ponga el termostato en Modo aire acondicionado, a veces hay que esperar cinco minutos antes de que este modo comience. Esta es una función de seguridad para proteger el compresor.
Termostato programable RTH2310 Selección del ajuste del ventilador Usar el conmutador del ventilador para seleccionar su modo de funcionamiento. Auto El ventilador funciona sólo cuando la calefacción o el aire acondicionado están activados. Sin embargo, si la calefacción es a gas o aceite, el ventilador funcionará sólo cuando el aire que sale de las rejillas de ventilación esté bastante caliente, cuando la calefacción esté activada.
Manual de uso Economías con el uso del horario El termostato fija automáticamente el punto de ajuste de la temperatura según un horario programado. Se puede programar hasta cuatro períodos por día, con diferentes ajustes los días de semana y los fines de semana. Por ejemplo, puede haber cuatro períodos los días de semana pero solo dos (Despertar y Dormir) los fines de semana.
Termostato programable RTH2310 Programación predeterminada para ahorro de energía Este termostato viene predeterminado con configuraciones para un programa de ahorro de energía. Estos ajustes pueden reducir la cuenta de electricidad en un 33%. Referirse a la página siguiente si se desean modificar los ajustes. Días de semana Fines de semana Período Inicio Calor Frío Inicio Calor Frío Despertar 6:00 am 70 °F (21 °C) 78 °F (25.5 °C) 6:00 am 70 °F (21 °C) 78 °F (25.
Manual de uso Modificación del horario 1) 2) 3) Presionar Pgm. Se visualizan los ajustes para el período 1 del lunes al viernes. Presionar Day para cambiar entre MO TU WE TH FR (lunes a viernes) y SA SU (sábado y domingo). NOTA: presionar Day 3 segundos para seleccionar los 7 días. Para seleccionar otro período, presionar P# hasta que aparezca el número del período. NOTA: para saltear el período que aparece en pantalla presionar Clr.
Termostato programable RTH2310 Modificación del horario (continuación) 4) 5) 6) 7) 8) Mientras la hora parpadea, presionar o para ajustar la hora (de a 15 minutos). Presionar P#. Mientras la temperatura parpadea, poner el conmutador de sistema en Heat y presionar o para fijar la temperatura de calefacción. Poner el conmutador de sistema en Cool y presionar o para fijar la temperatura de aire acondicionado. Repetir las etapas 2 a 6 para otro período. Presionar Exit para salir.
Manual de uso Cancelación temporaria del horario Para ignorar temporariamente el horario, presionar o hasta que aparezca la temperatura deseada. El número del período parpadeará para indicar que el período corriente ha sido cancelado. La nueva temperatura se usará durante 2 horas. NOTA: Presionando o una vez aparecerá el punto de ajuste de la temperatura. Para cambiarlo, presionar cualquier botón más de una vez. Presionar el botón Mode si se desea cancelar el ajuste temporario.
Termostato programable RTH2310 Cancelación temporaria del horario Para ignorar de manera permanente el horario, presionar el botón Mode para que el número de período desaparezca. Presionar o para ajustar manualmente la temperatura. Presionar el botón Mode nuevamente si se desea anular la cancelación y retomar el horario. Aparecerá el número del período corriente y el termostato se ajustará para la temperatura programada para ese período.
Manual de uso Remplazo del filtro Luego de 500 horas de funcionamiento, aparecerá un icono para indicar que el filtro necesita remplazo. Una vez remplazado el filtro, presionar el botón Filter por 3 segundos para sacar el icono y hacer que el contador recomience el conteo.
Termostato programable RTH2310 Remplazo de las pilas Poner el conmutador System en Off antes de retirar las pilas. De lo contrario, el sistema de calefacción o aire acondicionado puede permanecer activado incluso cuando se han sacado las pilas. Instalar dos pilas AA nuevas cuando el icono de pilas bajas parpadee en la pantalla. El icono parpadeará durante 120 días, luego de lo cual el termostato cortará la corriente de la unidad de calefacción o aire acondicionado.
Manual de uso En caso de dificultad La pantalla está en blanco. • Verificar que dos pilas AA alcalinas nuevas estén bien instaladas No se pueden cambiar los ajustes de temperatura. • La temperatura está fuera del margen permitido: • Calor: 41 °F a 82 °F ( 5 °C a 28 °C). • Frío: 59 °F a 95 °F (15 °C a 35 °C). parpadea. • La protección del compresor está activada. Esperar a que finalice el plazo de 5 minutos de espera. HI aparece en pantalla.
Termostato programable RTH2310 Asistencia al cliente Para obtener asistencia con este producto, sírvase visitar http://yourhome.honeywell.com. O llame a la Asistencia Técnica de Honywell sin cargo al 1-800-468-1502. Para ahorrar tiempo, anote el número de modelo y los datos del código antes de llamar.
Manual de uso Garantía limitada de 1 año Honeywell garantiza este producto, a excepción de la batería, por el término de un (1) año contra cualquier defecto de fabricación o de los materiales, a partir de la fecha de compra por parte del consumidor, en condiciones normales de uso y servicio. Si en cualquier momento durante el período de garantía se verifica que el producto tiene un defecto o mal funcionamiento, Honeywell lo reparará o reemplazará (a elección de Honeywell).