Operating Manual RTH7400/RTH7500 Series Programmable Thermostat 69-2222ES-07
This manual covers the RTH7400 and RTH7500 models. (Pull thermostat from wallplate and turn over to find model number) This thermostat contains a Lithium battery which may contain Perchlorate material. Perchlorate Material—special handling may apply, See www.dtsc.ca.gov/hazardouswaste/perchlorate CAUTION: EQUIPMENT DAMAGE HAZARD. To prevent possible compressor damage, do not operate cooling system when outdoor temperature is below 50°F (10°C).
RTH7400/RTH7500 Series Table of contents About your new thermostat Appendices Thermostat features..................................... 2 Programming at a glance............................. 3 Quick reference to controls.......................... 4 Quick reference to status display................. 5 Battery replacement................................... 19 Customer assistance................................. 20 In case of difficulty..................................... 21 Limited warranty...............
Operating Manual About your new thermostat Congratulations! You’ve just purchased the world’s most advanced, easy-to-use thermostat. It has been designed to give you many years of reliable service and climate control. Features • Easy-to-follow menu programming. • One-touch temp control overrides program schedule at any time. • Precise comfort control keeps temperature within 1°F of the level you set. • Change/check reminder lets you know when to replace furnace filter.
RTH7400/RTH7500 Series This thermostat is ready to go! Your new thermostat is pre-programmed and ready to go. All you have to do is set the time and day. Then check the settings below and change if needed: 1. Set clock.................................................................................................See page 6 2. Select fan setting: Preset to Auto........................................To change, see page 7 3. Select system setting: Preset to Heat.................................
Operating Manual Quick reference to controls Arrow buttons Press to adjust temperature (see pages 11-14), or to make selections from screen menus. System & Fan Press to select fan operation (see page 7) or system (see page 8). Clock & More Press to set clock (see page 6) or furnace filter reminder. M28426A Schedule Press to set program schedule (see pages 11-12).
RTH7400/RTH7500 Series Quick reference to status display Current day of week Current inside temperature Current time Mon Smart Response Technology in effect (see page 15) ® 75 Recovery System Cool System & Fan System setting (see page 8) Set to 6:01 AM Temperature setting 75 Heat On Fan Auto Schedule Clock & Mode M28078 Other display messages: • Cool On: Cooling system is activated • Heat On: Heating system is activated • Aux Heat On: Auxiliary heating system is activated (heat pump system
Operating Manual Clock setting Press CLOCK System & Fan Schedule To set the current time display, press CLOCK, then press s or t to adjust the time. Press and hold s or t to advance the time more quickly. Clock & More Adjust time, then press DONE Press DONE to save & exit (or press GO BACK to exit without changing the time).
RTH7400/RTH7500 Series Fan setting Press SYSTEM & FAN System & Fan Schedule Press SYSTEM & FAN, then FAN to select fan operation: Clock & More • On: Fan is always on. • Auto: Fan runs only when the heating or cooling system is on.
Operating Manual System setting Press SYSTEM & FAN System & Fan Schedule Follow steps at left to select system: Press SYSTEM to select mode, then press DONE System Heat System 69-2222ES—07 M28081 Fan Auto Fan • Heat: Thermostat controls only the heating system. • Cool: Thermostat controls only the cooling system. • Auto: Thermostat automatically selects heating or cooling depending on the indoor temperature. • Off: All systems are off.
RTH7400/RTH7500 Series Save money by setting program schedules It’s easy to program your system for maximum energy savings. You can program four time periods each day, with different settings for weekdays and weekends. WAKE 6:00 am Set to the time you awaken and the temperature you want during the morning, until you leave for the day. LEAVE 8:00 am Set to the time you leave home and the temperature you want while you are away (usually an energy-saving level).
Operating Manual Energy saving settings for maximum cost savings This thermostat is pre-set with energy saving program settings. We recommend these settings, since they can reduce your heating/cooling expenses. (See next page to adjust times and temperatures of each time period.
RTH7400/RTH7500 Series To adjust program schedules (RTH7400 only) Press SCHEDULE System & Fan Schedule Clock & More Press EDIT Go Back M28084 Edit View M28085 MON TUE WED THU Period Wake 6:00 Set to AM 62 Heat FRI Go Back Next Step Done 1. Press SCHEDULE, then EDIT to see weekdays. 2. Press SELECT DAY to highlight Mon-Fri (they will share the same settings). 3. Press NEXT STEP twice, then press s or t to set Wake time for selected days. 4.
Operating Manual To adjust program schedules (RTH7500 only) Press SCHEDULE System & Fan Schedule Clock & More Press EDIT Go Back M28084 Edit View M28085 MON TUE WED THU Period Wake 6:00 Set to AM 62 Heat FRI Go Back Next Step 1. Press SCHEDULE, then EDIT to see weekdays. 2. Press SELECT DAY. You can select multiple days to program with the same settings. 3. Press NEXT STEP twice, then press s or t to set Wake time for selected day(s). 4.
RTH7400/RTH7500 Series Program schedule override (temporary) Adjust temperature Mon 62 System Heat System & Fan Press s or t to immediately adjust the temperature. This will temporarily override the temperature setting for the current time period. Temporary Set to 6:08 AM The new temperature will be maintained until the next time period. 68 When the timer expires, the program schedule will resume and set the temperature to the level you’ve programmed for the current time period.
Operating Manual Program schedule override (permanent) Adjust temperature Press s or t to adjust temperature, then press HOLD. This will turn off the program schedule. Mon 62 System Heat Whatever temperature you set will be maintained 24 hours a day, until you manually change it, or press USE SCHEDULE to cancel “Hold” and resume the program schedule.
RTH7400/RTH7500 Series AboutChangeover Auto your new thermostat Use this feature in climates where both air conditioning and heating are used on the same day. When the system mode is in Auto, the thermostat automatically selects heating or cooling depending on the indoor temperature.
Operating Manual AboutChangeover Auto your new thermostat If the cool temperature is lowered to where it gets close to the heat setting, an arrow next to heat will show the thermostat is lowering the heat setting down to maintain a 3-degree separation. Temporary Set To Tue 69 1:09 PM 74 Heat Cool System Auto Fan Auto Heat The triangle indicates the cool temperature is increasing to maintain 3 degrees between heat and cool settings.
RTH7400/RTH7500 Series Aboutreminder Filter your new thermostat Press RESET after changing filter Change Filter 70 System Reset Heat If activated during installation, the furnace filter reminder alerts you when it is time to replace your filter. Set to 6:01 AM 70 Press RESET after changing the filter, to restart the timer. Heat On Fan Auto To reset the reminder interval before it expires: Schedule 1. Press MORE, then NEXT. Clock & More 2. Press RESET. 3. Press DONE to save and exit.
Operating Manual Special features Smart Response Technology: This feature allows the thermostat to “learn” how long the furnace and air conditioner take to reach programmed temperature settings, so the temperature is reached at the time you set. For example: Set the Wake time to 6 am, and the temperature to 70°. The heat will come on before 6 am, so the temperature is 70° by the time you wake at 6. The message “Recovery” is displayed when the system is activated before a scheduled time period.
RTH7400/RTH7500 Series Battery replacement Grasp thermostat and pull to remove from wallplate Batteries are optional (to provide backup power) if your thermostat was wired to run on AC power when installed. Install fresh batteries immediately when the LO BATT warning begins flashing. The warning flashes about 30 days before batteries are depleted. Even if the warning does not appear, you should replace batteries once a year, or before leaving home for more than a month.
Operating Manual Customer assistance For assistance with this product, please visit http://yourhome.honeywell.com or call Honeywell Customer Care toll-free at 1-800-468-1502.
RTH7400/RTH7500 Series About In caseyour of difficulty new thermostat If you have difficulty with your thermostat, please try the following suggestions. Most problems can be corrected quickly and easily. Display is blank No response to key presses (or temperature will not change) • Check circuit breaker and reset if necessary. • Make sure power switch at heating & cooling system is on. • Make sure furnace door is closed securely.
Operating Manual About In caseyour of difficulty new thermostat Heating or cooling system does not respond 69-2222ES—07 • Press SYSTEM to set system to Heat. Make sure the temperature is set higher than the Inside temperature. • Press SYSTEM to set system to Cool. Make sure the temperature is set lower than the Inside temperature. • Check circuit breaker and reset if necessary. • Make sure power switch at heating & cooling system is on. • Make sure furnace door is closed securely.
RTH7400/RTH7500 Series About your 1-year limited new warranty thermostat Honeywell warrants this product, excluding battery, to be free from defects in the workmanship or materials, under normal use and service, for a period of one (1) year from the date of purchase by the consumer. If at any time during the warranty period the product is determined to be defective or malfunctions, Honeywell shall repair or replace it (at Honeywell’s option).
Operating Manual 1-year limited warranty Honeywell’s sole responsibility shall be to repair or replace the product within the terms stated above. HONEYWELL SHALL NOT BE LIABLE FOR ANY LOSS OR DAMAGE OF ANY KIND, INCLUDING ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING, DIRECTLY OR INDIRECTLY, FROM ANY BREACH OF ANY WARRANTY, EXPRESS OR IMPLIED, OR ANY OTHER FAILURE OF THIS PRODUCT.
RTH7400/RTH7500 Series 25 69-2222ES—07
Automation and Control Solutions Honeywell International Inc. 1985 Douglas Drive North Golden Valley, MN 55422 http://yourhome.honeywell.com ® U.S. Registered Trademark. © 2013 Honeywell International Inc. 69-2222ES—07 M.S. Rev. 11-2013 Printed in U.S.A.
Manual de uso Serie RTH7400/RTH7500 Termostato programable 69-2222ES-07
Este manual incluye el modelos RTH7400 y RTH7500. (Retire el termostato de la placa de montaje y gírelo para ver el número de modelo.) Este termostato tiene una batería de litio que puede contener perclorato. Perclorato: puede ser necesario manipularlo con métodos especiales. Visite www.dtsc.ca.gov/hazardouswaste/perchlorate PRECAUCIÓN: PELIGRO DE DAÑO DEL EQUIPO.
Serie RTH7400/RTH7500 Índice de contenidos Acerca de su nuevo termostato Apéndices Funciones del termostato............................ 2 Programación a simple vista........................ 3 Referencia rápida de los controles.............. 4 Referencia rápida de la pantalla.................. 5 Instalación de las baterías......................... 19 Asistencia al cliente................................... 20 En caso de dificultades.............................. 21 Garantía limitada......................
Manual de uso Acerca de su nuevo termostato ¡Felicitaciones! Usted acaba de comprar el termostato más avanzado y más fácil de usar en todo el mundo. Ha sido diseñado para proporcionarle muchos años de servicio confiable y control del clima. Funciones • Programación con menú fácil de seguir. • El control de temp. de un sólo toque anula el horario programado en cualquier momento. • Preciso control de comodidad que mantiene la temperatura dentro del rango de 1º F del nivel que usted fije.
Serie RTH7400/RTH7500 Este termostato está listo para usar! El nuevo termostato viene preprogramado y listo para usar. Todo lo que tiene que hacer es ajustar la hora y el día. Luego verifique los siguientes ajustes y cámbielos si es necesario: 1. Ajuste la hora....................................................................................... Ver página 6 2. Seleccione el ajuste del ventilador: Predeterminado en Auto............... Ver página 7 3.
Manual de uso Referencia rápida de los controles Oprima para ajustar la temperatura (ver páginas 11-14), o para hacer selecciones de menús. System & Fan Oprima para seleccionar el funcionamiento del ventilador (ver página 7) o sistema (ver página 8). M28426A Schedule Oprima para anular el horario de programa (ver páginas 11-12). 69-2222ES—07 4 Clock & More Oprima para ajustar el reloj (ver página 6) o recordatorio de cambio de filtro de la estufa.
Serie RTH7400/RTH7500 Referencia rápida de la pantalla Día de la semana actual Temperatura interior actual Hora actual Mon Smart Response Technology activado (ver página 15) ® 75 Recovery System Cool Ajustes del sistema (ver página 8) 6:01 AM Ajuste de temperatura 75 Heat On Fan Auto System & Fan Ajustes del ventilador (ver página 7) Set to Schedule Clock & Mode M28078 Otros mensajes de pantalla: • Cool On : El sistema de refrigeración está activado • Heat On : El sistema de calefacción
Manual de uso Ajuste del reloj Oprima CLOCK System & Fan Schedule Para ajustar la hora actual en pantalla, oprima CLOCK, luego oprima s o t para ajustar la hora. Mantenga oprimido s o t para avanzar la hora con más rapidez. Clock & More Ajuste la hora, luego oprima DONE Oprima DONE para guardar y salir (u oprima GO BACK para salir sin cambiar la hora).
Serie RTH7400/RTH7500 Ajustes del ventilador Oprima SYSTEM & FAN System & Fan Schedule Oprima SYSTEM & FAN, entonces FAN para seleccionar el funcionamiento del ventilador: Clock & More M28081 Oprima FAN al modo selecto, luego oprima DONE System Heat System • On: El ventilador está siempre encendido. • Auto: El ventilador funciona sólo cuando el sistema de calefacción o de refrigeración está encendido.
Manual de uso Ajustes del sistema Oprima SYSTEM & FAN System & Fan Schedule Clock & More Oprima SYSTEM al modo selecto, luego oprima DONE System Heat System 69-2222ES—07 M28081 Fan Auto Fan Siga los pasos en la izquierda para seleccionar: • Heat: El termostato controla sólo el sistema de calefacción. • Cool: El termostato controla sólo el sistema de refrigeración. • Auto: El termostato selecciona automáticamente la calefacción o refrigeración de acuerdo a la temperatura interior.
Serie RTH7400/RTH7500 Ahorre dinero con el ajuste de los horarios de programas Es fácil programar su sistema que permite un ahorro máximo de energía. Usted puede programar cuatro períodos de tiempo por día, con diferentes configuraciones para los días de semana y los fines de semana. “WAKE” Programe la hora en que se despierta y la temperatura que quiere 6:00 am durante la mañana, hasta que usted se va de su casa.
Manual de uso Configuraciones de ahorro de energía para mayores ahorros de gastos Este termostato viene predeterminado con configuraciones de programa para ahorro de energía. Recomendamos estos ajustes, dado que pueden reducir sus gastos de calefacción/refrigeración. (Ver la página siguiente para ajustar las horas y temperaturas para cada período).
Serie RTH7400/RTH7500 Para ajustar los horarios de programas (RTH7400 solamente) Oprima SCHEDULE System & Fan Schedule Clock & More Oprima EDIT Go Back M28084 Edit View M28085 MON TUE WED THU Period Wake 6:00 Set to AM 62 Heat FRI Go Back Next Step Done 1. Oprima SCHEDULE, luego oprima EDIT. 2. Oprima SELECT DAY para seleccionar Lun-Vier (compartirán los mismos ajustes). 3. Oprima NEXT STEP dos veces, luego oprima s o t para fijar la hora Wake. 4.
Manual de uso À propos Para ajustar dulos thermostat horarios de programas (RTH7500 solamente) Oprima SCHEDULE System & Fan Schedule Clock & More Oprima EDIT Go Back M28084 Edit View M28085 MON TUE WED THU Period Wake 6:00 Set to AM 62 Heat FRI Go Back Next Step Done 1. Oprima SCHEDULE, luego oprima EDIT. 2. Oprima SELECT DAY. Usted puede programar días múltiples con los mismos ajustes. 3. Oprima NEXT STEP dos veces, luego oprima s o t para fijar la hora Wake. 4.
Serie RTH7400/RTH7500 À propos du Anulación (temporaria) thermostatde horario de programas Ajuste la temperatura Mon 62 System Heat System & Fan Oprima s o t para ajustar inmediatamente la temperatura. Esto anulará temporariamente el ajuste de temperatura para el período actual. Temporary Set to 6:08 AM La nueva temperatura se mantendrá hasta la hora que haya fijado.
Manual de uso À propos du Anulación (permanente) thermostat de horario de programas Ajuste la temperatura Oprima s o t para ajustar temperatura, luego oprima HOLD. Esto apagará el horario de programas. Mon 62 System Heat Set to 6:08 Fan Auto Hold AM Cualquier temperatura que fije se mantendrá 24 horas al día, hasta que la cambie manualmente, u oprima USE SCHEDULE para cancelar “Hold” y reanude el horario de programas.
Serie RTH7400/RTH7500 À propos duautomática Conversión thermostat Utilice esta característica en climas donde se utilicen tanto el aire acondicionado como la calefacción durante el mismo día. Cuando el sistema está configurado en Auto (automático), el termostato elige automáticamente cuándo calentar o enfriar, dependiendo de la temperatura interior.
Manual de uso À propos duautomática Conversión thermostat Si la temperatura fría desciende a donde queda cercana a la configuración de calefacción, una flecha al lado del calor mostrará que el termostato está bajando la configuración de calor para mantener una separación de 3 grados. Temporary Set To Tue 69 1:09 PM 74 Heat Cool System Auto Fan Auto Heat El triángulo indica que la temperatura fría está aumentando para mantener 3 grados entre las configuraciones para calor y frío.
Serie RTH7400/RTH7500 À propos du thermostat Recordatorio de cambio de filtro Oprima RESET después de cambiar el filtro Change Filter 70 System Reset Heat Si está activado durante la instalación, el recordatorio del filtro de la estufa le alerta cuando es hora de substituir su filtro. Set to 6:01 AM 70 Oprima RESET después de cambiar el filtro, para recomenzar el contador de tiempo. Heat On Fan Auto Para cambiar el intervalo del recordatorio: Schedule 1. Oprima MORE, y después NEXT.
Manual de uso À propos du Funciones especiales thermostat Smart Response Technology: Permite que el termostato “aprenda” cuánto tiempo les lleva a la estufa y al acondicionador de aire alcanzar la temperatura programada, de modo que se alcance la temperatura a la hora fijada. Por ejemplo, fije la hora de levantarse a las 6 AM y la temperatura a 70°. La calefacción se encenderá antes de las 6 AM, para que la temperatura alcance los 70º cuando usted se despierte a las 6.
Serie RTH7400/RTH7500 À propos dude Reemplazo thermostat baterías Sujete el termostato y hale para separarlo de la placa de montaje Las baterías son opcionales (para brindar alimentación de respaldo) si el cableado de su termostato se instaló para funcionar con CA. Instale baterías nuevas inmediatamente cuando comience a titilar el aviso LO BATT. El aviso titila alrededor de 30 días antes de que las baterías estén agotadas.
Manual de uso Asistencia al cliente Si necesita asistencia, visite http://yourhome.honeywell.com o llame al número gratuito de atención al cliente de Honeywell al 1-800-468-1502.
Serie RTH7400/RTH7500 À propos En caso de dudificultades thermostat Si usted tiene dificultades con su termostato, pruebe las sugerencias que figuran a continuación. La mayoría de los problemas se pueden solucionar rápida y fácilmente. Pantalla en blanco Los ajustes de temperatura no cambian • Verifique el disyuntor y reinicie si es necesario. • Asegúrese de que esté encendido el interruptor del sistema de calefacción y refrigeración. • Asegúrese de que esté bien cerrada la puerta de la estufa.
Manual de uso À propos En caso de dudificultades thermostat No responde el sistema de calefacción o de refrigeración 69-2222ES—07 • Oprima SYSTEM para fijar en sistema en Heat. Asegúrese de que la temperatura de ajuste sea mayor que la temperatura interior. • Oprima SYSTEM para fijar en sistema en Cool. Asegúrese de que la temperatura de ajuste sea menor que la temperatura interior. • Verifique el disyuntor y reinicie si es necesario.
Serie RTH7400/RTH7500 À proposlimitada Garantía du thermostat de 1 año Honeywell garantiza este producto, a excepción de la batería, por el término de un (1) año contra cualquier defecto de fabricación o de los materiales, a partir de la fecha de compra por parte del consumidor. Si en cualquier momento durante el período de garantía se verifica que el producto tiene un defecto o que funciona mal, Honeywell lo reparará o reemplazará (a elección de Honeywell).
Manual de uso À proposlimitada Garantía du thermostat de 1 año INDIRECTAMENTE, DEL INCUMPLIMIENTO DE LAS GARANTÍAS, EXPRESAS O IMPLICÍTAS, O DE OTRAS FALLAS DE ESTE PRODUCTO. Algunos estados no permiten la exclusión o limitación del daño incidental o indirecto, entonces, esta limitación puede no resultar aplicable a su caso. LA PRESENTE GARANTÍA ES LA ÚNICA GARANTÍA EXPRESA QUE HONEYWELL PROPORCIONA RESPECTO DE ESTE PRODUCTO.
Serie RTH7400/RTH7500 25 69-2222ES—07
Soluciones para automatización y control Honeywell International Inc. 1985 Douglas Drive North Golden Valley, MN 55422 http://yourhome.honeywell.com ® Marca registrada de los EE. UU. © 2013, Honeywell International Inc. 69-2222ES—07 M.S. Rev. 11-2013 Impreso en EE.