20" (50CM) TURBO FORCETM 20" (50CM) TRI-TECHMC HIGH PERFORMANCE STAND FANS Owner's Manual Model HS-2007 Series

OPERATION
• Place your fan on a
level and dry surface.
• Plug the power cord
into a polarized 120 Volt
AC wall outlet.
• Adjust the height by
loosening the Height
Adjustment Knob and
adjusting the fan up or
down. Then tighten the
Height Adjustment Knob.
• To operate the Child
Resistant switch,
depress the Speed
Control Knob and turn to
the desired position
(Fig. 10).
• To activate or
disengage the oscillation
feature, push down or
pull up on the Oscillation
Control Knob (Fig. 11).
• Tilt the fan head to
desired angle.
CLEANING AND STORAGE
• Unplug the fan before
cleaning.
• Use only a soft, damp
cloth to gently wipe the
fan clean.
• DO NOT immerse the
fan in water and never
allow water to drip into
the motor housing.
• DO NOT use gasoline,
paint thinner or other
chemicals to clean the
fan.
REMOVAL OF THE FRONT
GRILL FOR CLEANING
• Release the Front Grille
clips from around the Rear
Grille and remove the Front
Grille.
• Unscrew the Blade
Knob by turning it
CLOCKWISE (reverse
thread).
• Pull the Fan Blade away
from the Motor Housing.
• Gently wipe the Fan
Blade and Grilles.
• Re-assemble the fan by
following the ASSEMBLY
INSTRUCTIONS.
Fig. 10
Fig. 11
PUSH IN
AND TURN
OSCILLATION
CONTROL KNOB
035-00449-000_R2 HS-2007 EFS 10/31/03 8:25 AM Page 5