TruStability® Board Mount Pressure Sensors HSC Series—High Accuracy, Compensated/Amplified ±1.6 mbar to ±10 bar | ±160 Pa to ±1 MPa | ±0.
, TruStability® Board Mount Pressure Sensors The TruStability® High Accuracy Silicon Ceramic (HSC) Series is a piezoresistive silicon pressure sensor offering a ratiometric analog or digital output for reading pressure over the specified full scale pressure span and temperature range. The HSC Series is fully calibrated and temperature compensated for sensor offset, sensitivity, temperature effects, and nonlinearity using an on-board Application Specific Integrated Circuit (ASIC).
Features and Benefits Proprietary Honeywell technology Combines high sensitivity with high overpressure and burst pressure while providing industry leading stability—performance factors that are difficult to achieve in the same product; this gives the customer more flexibility in sensor implementation and reduces the customer design requirements for protecting the sensor without sacrificing the ability to sense very small changes in pressure.
Features and Benefits Industry-leading accuracy Extremely tight accuracy of ±0.25 %FSS BFSL (Full Scale Span Best Fit Straight Line) reduces software needed to correct system inaccuracies, minimizing system design time: • Avoids additional customer calibration. • Helps to improve system efficiency. • Often simplifies software development. High burst pressures • Promotes system reliability and reduces potential system downtime. • Can simplify the design process.
Features and Benefits Output: ratiometric analog; I2C- or SPI-compatible 14-bit digital output (min. 12-bit sensor resolution) Accelerates performance through reduced conversion requirements and the convenience of direct interface to microprocessors. Small size Miniature 10 mm x 10 mm [0.39 in x 0.39 in] package is very small when compared to many board mount pressure sensors: • Occupies less area on the PCB. • Typically allows for easy placement on crowded PCBs or in small devices.
Potential Applications MEDICAL • Airflow monitors • Anesthesia machines • Blood analysis machines • Gas chromatography • Gas flow instrumentation • Kidney dialysis machines • Oxygen concentrators • Pneumatic controls • Respiratory machines • Sleep apnea equipment • Ventilators • Spirometers • Nebulizers • Hospital room air pressure INDUSTRIAL 6 sensing.honeywell.
General Specifications Table 1. Absolute Maximum Ratings1 Characteristic Min. Max. Unit Supply voltage (Vsupply) -0.3 6.0 Vdc Voltage on any pin -0.3 Vsupply + 0.3 V Digital interface clock frequency: I2C SPI 100 50 400 800 kHz 3 — kV -40 [-40] 85 [185] °C [°F] ESD susceptibility (human body model) Storage temperature Soldering time and temperature: lead solder temperature (SIP, DIP) peak reflow temperature (SMT) 4 s max. at 250 °C [482 °F] 15 s max.
General Specifications Table 3. Wetted Materials1 Component Port 1 (Pressure Port) Port 2 (Reference Port) high temperature polyamide high temperature polyamide Substrate alumina ceramic alumina ceramic Adhesives epoxy, silicone epoxy, silicone ceramic, silicon, glass, solder silicon, glass, gold Ports and covers Electronic components Contact Honeywell Customer Service for detailed material information.
Analog Operating Specifications Table 5. Analog Operating Specifications Min. Typ. Max. Unit 3.0 4.75 3.3 5.0 3.6 5.25 Vdc 3.27 4.95 3.3 5.0 3.33 5.05 — — 2.1 2.7 2.8 3.5 mA Operating temperature range4 -20 [-4] — 85 [185] °C [°F] Compensated temperature range5 0 [-32] — 50 [122] °C [°F] Startup time (power up to data ready) — — 5 ms Response time — 1 — ms Clipping limit: upper lower — 2.5 — — 97.5 — %Vsupply Accuracy6 — — ±0.25 %FSS BFSL8 0.
Digital Operating Specifications Table 6. Digital Operating Specifications Characteristic Min. Typ. Max. Unit 3.0 4.75 3.3 5.0 3.6 5.25 Vdc 3.27 4.95 3.3 5.0 3.33 5.05 — — 3.1 3.7 3.9 4.6 mA Operating temperature range4 -20 [-4] — 85 [185] °C [°F] Compensated temperature range5 0 [-32] — 50 [122] °C [°F] Startup time (power up to data ready) — — 3 ms Response time — 0.
Transfer Function Limits Figure 2. Transfer Function Limits1 Analog Versions Compensated Pressure Range Output (%Vsupply) 100 90 80 70 60 Ideal 50 1% Total Error Band 40 30 20 10 0 0 Pmin. Output (V) = 1 2 3 4 5 6 7 9 8 Pressure (example unit) 0.8 x Vsupply Pmax. – Pmin. 10 Pmax. x (Pressureapplied – Pmin.) + 0.10 x Vsupply Output (% of 214 counts) Digital Versions Compensated Pressure Range 100 90 80 70 60 50 40 30 20 10 0 Ideal 1% Total Error Band 0 Pmin.
5x Total Error Band Values 30 inH2 Figure 3. Total Error Band Values for Full Scale Span Pressure Ranges Differential Gage 10 bar | 1 MPa 150 psi 10 bar | 1 MPa 150 psi Low to Mid Pressure Low to Mid Pressure 1 psi 1 psi 60 mbar | 6 kPa 60 mbar | 6 kPa 20 inH2O 20 inH2O Ultra-Low Pressure Ultra-Low Pressure 40 mbar | 4 kPa 25 mbar | 2.5 kPa 10 inH2O 40 mbar | 4 kPa 25 mbar | 2.5 kPa 10 inH2O 16 mbar | 1.6 kPa 16 mbar | 1.6 kPa 5 inH2O 2 inH2O 0 inH2O 4 mbar | 400 Pa 0% ±1 ±1.
Nomenclature and Order Guide Figure 4. Nomenclature and Order Guide For example, HSCDNNN150PGAA3 defines an HSC Series TruStability® Pressure Sensor, DIP package, NN pressure port, no special options,150 psi gage pressure range, analog output type, 10% to 90% of Vsupply transfer function, 3.3 Vdc supply voltage. HSC D NN N 150PG A A 3 Supply Voltage 3 3.3 Vdc 5 5.
Pressure Range Specifications ±1.6 mbar to ±10 bar Table 8. Pressure Range Specifications for ±1.6 mbar to ±10 bar Unit Working Pressure1 Over Pressure2 Pmax. Pressure Range Pmin. Pressure Range (see Figure 4) 001BA 1.6BA 2.5BA 004BA 006BA 010BA 0 0 0 0 0 0 1 1.6 2.5 4 6 10 bar bar bar bar bar bar - 2 4 6 8 17 17 1.6MD 2.5MD 004MD 006MD 010MD 016MD 025MD 040MD 060MD 100MD 160MD 250MD 400MD 600MD 001BD 1.6BD 2.5BD 004BD -1.6 -2.5 -4 -6 -10 -16 -25 -40 -60 -100 -160 -250 -400 -600 -1 -1.6 -2.
Pressure Range Specifications ±160 Pa to ±1 MPa Table 9. Pressure Range Specifications for ±160 Pa to ±1 MPa Pmax. Pressure Range Pmin. Pressure Range (see Figure 4) Unit Working Pressure1 Over Pressure2 0 0 0 0 0 0 100 160 250 400 600 1 kPa kPa kPa kPa kPa MPa - 200 400 600 800 1700 1700 -160 160 -250 250 -400 400 -600 600 -1 1 -1.6 1.6 -2.5 2.
Specifications ±0.5 inH2O to ±150 psi Table 10. Pressure Range Specifications for 0.5 inH2O to 150 psi Unit Working Pressure1 Over Pressure2 Pmax. Pressure Range Pmin. Pressure Range (see Figure 4) 015PA 030PA 060PA 100PA 150PA 0 0 0 0 0 15 30 60 100 150 psi psi psi psi psi - 30 60 120 250 250 0.5ND 001ND 002ND 004ND 005ND 010ND 020ND 030ND 001PD 005PD 015PD 030PD 060PD -0.5 -1 -2 -4 -5 -10 -20 -30 -1 -5 -15 -30 -60 0.
Available Standard Configurations Figure 5. All Available Standard Configurations (Dimensional drawings on pages noted below.) Pressure Port Package Code DIP SMT SIP NN page 19 AA page 21 — page 24 — page 24 AN page 19 page 22 page 25 page 19 page 22 page 25 LN FF — — page 25 FN — — page 26 GN — — page 26 NB — — page 26 RN page 20 page 22 page 27 sensing.honeywell.
Available Standard Configurations Figure 5. All Available Standard Configurations (Continued; dimensional drawings on pages noted below.) Pressure Port Package Code DIP SMT SIP RR page 20 page 23 page 27 page 20 page 23 page 27 DR JN — — page 21 page 23 page 28 page 21 page 24 page 28 JJ HH — — page 28 HN — — page 29 MN — — page 29 SN — — page 29 18 sensing.honeywell.
Dimensional Drawings DIP Packages Figure 6. DIP Package Dimensional Drawings (For reference only: mm [in].) Dimensions DIP NN: No ports 8 7 6 0,25 [0.010] 5,44 [0.214] 5 PORT 1 PIN 1 INDICATOR 1 2 3 4 10,0 [0.39] 13,3 [0.53] 6,99 [0.275] PORT 2 9,24 [0.364] 10,85 [0.427] 2,54 TYP. [0.100] 8X 0,46 [0.018] DIP AN: SIngle axial barbed port 13,75 [0.541] 8 7 6 5 0,25 [0.010] 10,0 [0.39] 7,95 [0.313] 6,2 [0.24] 4,93 [0.194] PIN 1 INDICATOR PORT 2 13,3 [0.53] 6,99 [0.
Dimensional Drawings DIP Packages Figure 6. DIP Package Dimensional Drawings (continued) Dimensions DIP RN: Single radial barbed port 8 7 6 0,25 [0.010] 5,80 [0.228] 5 10,0 [0.39] 4,2 [0.17] 13,3 [0.53] PORT 1 6,99 [0.275] PORT 2 1,93 [0.076] 1 2 3 4 9,24 [0.364] 11,21 [0.441] 2,54 TYP. [0.100] 8X 0,46 [0.018] DIP RR: Dual radial barbed ports, same side 4,0 [0.16] 8 7 6 0,25 [0.010] 6,16 [0.242] 5 10,0 [0.39] 2X 1,93 [0.076] 13,3 [0.53] PORT 1 PORT 1 PORT 2 6,99 [0.
Dimensional Drawings DIP and SMT Packages Figure 6. DIP Package Dimensional Drawings (continued) Dimensions DIP JN: Single radial barbless port 6,75 [0.266] 2,34 [0.092] 8 7 6 7,58 [0.298] 3,28 [0.129] 5 3,28 [0.129] PORT 1 2 3 4 1,9 [0.07] 4,1 [0.16] 13,3 [0.53] 7,00 PORT 2 [0.276] PORT 1 1 9,91 [0.390] 9,40 [0.370] 9,24 [0.364] 11,92 [0.469] 0,25 [0.010] 6,70 [0.264] 8 X 0,461 [0.018] DIP JJ: Dual radial radial barbless ports, same side 2X 6,75 [0.266] 8 2X 2,34 PORT 1 [0.
Dimensional Drawings SMT Packages Figure 7. SMT Package Dimensional Drawings (continued) Dimensions SMT AN: Single axial barbed port 13,75 [0.541] 8 7 6 5 10,0 [0.39] 7,95 [0.313] 4,93 DIA. [0.194] PIN 1 INDICATOR 13,3 [0.53] 6,99 PORT 2 [0.275] PORT 1 1 2 3 4 4,80 [0.189] 6,77 [0.266] 2,54 TYP. [0.100] 8X 0,46 [0.018] SMT LN: Single axial barbless port 13,75 [0.541] 8 7 6 5 PORT 1 PIN 1 INDICATOR 1 2 3 10,0 [0.394] 5,80 [0.228] 13,3 [0.53] 6,99 PORT 2 [0.275] 2,47 DIA. [0.
Dimensional Drawings SMT Packages Figure 7. SMT Package Dimensional Drawings (continued) Dimensions SMT RR: Dual radial barbed ports, same side 4,0 [0.16] 8 7 6 10,0 [0.39] 6,16 [0.242] 5 2X 1,93 DIA. [0.076] 13,3 [0.53] PORT 1 PORT 1 PORT 2 6,99 [0.275] PORT 2 4,6 [0.18] 1 2 3 4 4,80 [0.189] 6,77 [0.266] 2,54 TYP. [0.100] 8X 0,46 [0.018] 3,78 [0.149] SMT DR: Dual radial barbed ports, opposite sides 2X 2,93 [0.115] 15,8 [0.62] 8 7 6 10,0 [0.39] 6,16 [0.242] 5 2X 1,93 DIA. [0.
Dimensional Drawings SMT and SIP Packages Figure 7. SMT Package Dimensional Drawings (continued) Dimensions SMT JJ: Dual radial barbless ports, same side 2X 6,75 [0.266] 8 2X 2,34 PORT 1 [0.092] 4,162 [0.1639] 7 6 5 3,28 [0.129] PORT 1 1 2 3 PORT 2 4 2,54 [0.100] 9,91 [0.390] 9,40 [0.370] 7,58 [0.298] 8,36 [0.329] 4,76 [0.187] 4,15 [0.163] 6,98 [0.275] 7,00 13,3 [0.276] [0.53] 5,68 [0.189] 8 X 1,28 [0.050] 8 X 0,461 [0.018] 5,38 [0.212] Figure 8.
Dimensional Drawings SIP Packages Figure 8. SIP Package Dimensional Drawings (continued) Dimensions SIP AN: Single axial barbed port 13,75 [0.541] 10,0 [0.39] 10,0 [0.39] PORT 1 PORT 2 4.93 DIA. [0.194] 15,2 [0.60] 0,25 [0.010] 4X 0,51 [0.020] 2,54 TYP. [0.100] SIP LN: Single axial barbless port 10,0 [0.39] 13,75 [0.541] 10,0 [0.39] PORT 2 PORT 1 2,47 DIA. [0.097] 15,2 [0.60] 1 2 3 4 4X 0,51 [0.
Dimensional Drawings SIP Packages Figure 8. SIP Package Dimensional Drawings (continued) Dimensions SIP FN: Fastener mount, single axial barbed port 29,48 [1.161] 16,38 [0.645] 23,12 [0.910] 17,78 [0.700] 3257 3257 2X 3.94 DIA. [0.155] 4.78 DIA . [0.188] 20,16 [0.794] 4X 0,51 [0.020] SIP GN: Ribbed fastener mount, single axial barbed port 0,25 [0.010] 2,54 TYP. [0.100] 27,96 [1.101] 21,60 [0.850] 16,51 [0.650] 19,06 [0.750] PORT 2 PORT 1 2X 3,94 DIA. [0.155] 4.
Dimensional Drawings SIP Packages Figure 8. SIP Package Dimensional Drawings (continued) Dimensions SIP RN: Single radial barbed port 10,0 [0.39] 5,80 [0.228] PORT 1 PORT 1 10,0 [0.39] 1,92 DIA. [0.076] PORT 2 15,2 [0.60] 1 2 3 4 0,25 [0.010] 4X 0,51 [0.020] 2,54 TYP. [0.100] SIP RR: Dual radial barbed ports, same side 10,0 [0.39] 6,16 [0.243] PORT 1 10,0 [0.39] PORT 2 PORT 1 PORT 2 2X 1,92 DIA. [0.076] 15,2 [0.60] 1 2 3 4 0,25 [0.010] 4X 0,51 [0.020] 2,54 TYP. [0.
Dimensional Drawings SIP Packages Figure 8. SIP Package Dimensional Drawings (continued) Dimensions SIP JN: Single radial barbless port 2,34 [0.092] 6,75 [0.266] 3,28 [0.129] PORT 1 7,58 [0.298] 7,00 [0.276] 2,2 [0.087] 1 2 3 1,7 [0.07] 1,9 [0.07] 10,0 [0.39] PORT 2 25,0 [0.98] 15,20 [0.598] 1,14 [0.045] 10,0 [0.39] 9,40 [0.370] 4 2,1 [0.08] 4 X 0,51 [0.020] 2,54 TYP. [0.100] SIP JJ: Dual radial barbless ports, same side 2X 2,34 [0.092] 6,75 [0.266] 3,28 [0.129] PORT 1 7,58 [0.
Dimensional Drawings SIP Packages Figure 8. SIP Package Dimensional Drawings (continued) Dimensions SIP HN: Fastener mount single radial barbed port 23,12 [0.910] 7,97 [0.314] 4,78 DIA. [0.188] 3257 28,96 [1.140] PORT 2 2X 3,94 DIA. [0.155] 11,27 [0.444] 0,25 [0.010] 4X 0,51 [0.020] 2,54 TYP. [0.100] SIP MN: Manifold mount, outer diameter seal 5,36 [0.211] PORT 2 PORT 1 15,24 .DIA [0.600] 12,5 [0.49] 4X 0,51 [0.020] 0,25 [0.010] 2,54 TYP. [0.
Pinouts, PCB Pad Layout Table 11. Pinouts for DIP and SMT Packages Output Type Pin 1 Pin 2 Pin 3 Pin 4 Pin 5 Pin 6 Pin 7 Pin 8 I2C GND Vsupply SDA SCL NC NC NC NC SPI GND Vsupply MISO SCLK SS NC NC NC Analog NC Vsupply Vout GND NC NC NC NC Table 12. Pinouts for SIP Packages Output Type Pin 1 Pin 2 Pin 3 Pin 4 I2C GND Vsupply SDA SCL Analog NC Vsupply Vout GND Figure 9. Recommended PCB Pad Layouts DIP 0,813 [0.032] SMT 1,143 [0.045] 13,08 [0.515] 2,54 [0.
TruStability® Board Mount Pressure Sensors Portfolio Overview Table 13.
ADDITIONAL INFORMATION The following associated literature is available at sensing.honeywell.
Sales and Service Honeywell serves its customers through a worldwide network of sales offices, representatives and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact your local sales office or email us at info.sc@honeywell.com. Visit us on the Web at sensing.honeywell.
