Datasheet

14
sensing.honeywell.com
Table 8. Pressure Range Specifications for ±1.6 mbar to ±10 bar
Pressure
Range
(see
Figure 4)
Pressure
Range
Unit
Working
Pressure
1
Over
Pressure
2
Burst
Pressure
3
Common
Mode
Pressure
4
Total Error
Band
5
(%FSS)
Total Error
Band after
Auto-Zero
6
(%FSS)
Long-term
Stability
1000 hr, 25 °C
(%FSS)
Pmin.
Pmax.
Absolute
001BA 0 1 bar - 2 4 - ±1% - ±0.25%
1.6BA 0 1.6 bar - 4 8 - ±1% - ±0.25%
2.5BA 0 2.5 bar - 6 8 - ±1% - ±0.25%
004BA 0 4 bar - 8 16 - ±1% - ±0.25%
006BA 0 6 bar - 17 17 - ±1% - ±0.25%
010BA 0 10 bar - 17 17 - ±1% - ±0.25%
Differential
1.6MD -1.6 1.6 mbar 335 675 1000 3450 ±2.5% ±1.75% ±0.5%
2.5MD -2.5 2.5 mbar 335 675 1000 3450 ±2% ±1.25% ±0.35%
004MD -4 4 mbar 335 675 1000 3450 ±1.5% ±0.75% ±0.35%
006MD -6 6 mbar 335 675 1000 3450 ±1% ±0.75% ±0.35%
010MD -10 10 mbar 375 750 1250 5450 ±1% ±0.5% ±0.25%
016MD -16 16 mbar 375 750 1250 5450 ±1% ±0.5% ±0.25%
025MD -25 25 mbar 435 850 1350 10450 ±1% ±0.5% ±0.25%
040MD -40 40 mbar 435 850 1350 10450 ±1% ±0.5% ±0.25%
060MD -60 60 mbar - 850 1000 10000 ±1% - ±0.25%
100MD -10 0 100 mbar - 1400 2500 10000 ±1% - ±0.25%
160MD -160 160 mbar - 1400 2500 10000 ±1% - ±0.25%
250MD -250 250 mbar - 1400 2500 10000 ±1% - ±0.25%
400MD -400 400 mbar - 2000 4000 10000 ±1% - ±0.25%
600MD -600 600 mbar - 2000 4000 10000 ±1% - ±0.25%
001BD -1 1 bar - 4 8 10 ±1% - ±0.25%
1.6BD -1.6 1.6 bar - 8 16 10 ±1% - ±0.25%
2.5BD -2.5 2.5 bar - 8 16 10 ±1% - ±0.25%
004BD -4.0 4.0 bar - 16 17 10 ±1% - ±0.25%
Gage
2.5MG 0 2.5 mbar 335 675 1000 3450 ±3% ±2% ±0.5%
004MG 0 4 mbar 335 675 1000 3450 ±2% ±1.25% ±0.5%
006MG 0 6 mbar 335 675 1000 3450 ±2% ±1% ±0.35%
010MG 0 10 mbar 335 675 1000 3450 ±1.5% ±0.75% ±0.35%
016MG 0 16 mbar 335 675 1000 3450 ±1% ±0.75% ±0.25%
025MG 0 25 mbar 375 750 1250 5450 ±1% ±0.5% ±0.25%
040MG 0 40 mbar 375 750 1250 5450 ±1% ±0.5% ±0.25%
060MG 0 60 mbar - 850 1000 5450 ±1% ±0.5% ±0.25%
100MG 0 100 mbar - 850 1000 10000
±1% - ±0.25%
160MG 0 160 mbar - 850 1000 10000 ±1% - ±0.25%
250MG 0 250 mbar - 1400 2500 10000 ±1% - ±0.25%
400MG 0 400 mbar - 2000 4000 10000 ±1% - ±0.25%
600MG 0 600 mbar - 2000 4000 10000 ±1% - ±0.25%
001BG 0 1 bar - 2 4 10 ±1% - ±0.25%
1.6BG 0 1.6 bar - 4 8 10 ±1% - ±0.25%
2.5BG 0 2.5 bar - 8 16 10 ±1% - ±0.25%
004BG 0 4 bar - 8 16 16 ±1% - ±0.25%
006BG 0 6 bar - 17 17 17 ±1% - ±0.25%
010BG 0 10 bar - 17 17 17 ±1% - ±0.25%
1
Working pressure: The maximum pressure that may be applied to any port of the sensor in continuous use. This pressure may be outside the operating pressure range
limits (Pmin. to Pmax.) in which case the sensor may not provide a valid output until presssure is returned to within the operating pressure range. Tested to 1 million cycles,
minimum.
2
Overpressure: The maximum pressure which may safely be applied to the product for it to remain in specification once pressure is returned to the operating pressure range. Exposure
to higher pressures may cause permanent damage to the product. Unless otherwise specified this applies to all available pressure ports at any temperature with the operating
temperature range.
3
Burst pressure: The maximum pressure that may be applied to any port of the product without causing escape of pressure media. Product should not be expected to function after
exposure to any pressure beyond the burst pressure.
4
Common mode pressure: The maximum pressure that can be applied simultaneously to both ports of a differential pressure sensor without causing changes in specified
performance.
5
Total Error Band: The maximum deviation from the ideal transfer function over the entire compensated temperature and pressure range. Includes all errors due to offset, full scale
span, pressure non-linearity, pressure hysteresis, repeatability, thermal effect on offset, thermal effect on span, and thermal hysteresis (see Figure 1).
6
Total Error Band after Auto-Zero: The maximum deviation from the ideal transfer function over the entire compensated pressure range at a constant temperature and supply voltage
for a minimum of 24 hours after an auto-zero operation. Includes all errors due to full scale span, pressure non-linearity, pressure hysteresis, and thermal effect on span.
Pressure Range Specifications
±1.6 mbar to ±10 bar