HSF600 Fan Manual

D. DETERMINING THE HEIGHT OF THE FAN

The unique Twist & Lock

height adjustment feature lets you choose the perfect height for your

cooling needs. Twist the top pole and either pull up or push down to find your ideal height then

twist again to lock in place. (see label on back of fan pole);

• Securely grasp the top portion of

the pole and twist counter clockwise

to unlock.

• Pull up or push down to adjust height

(placing your foot or hand gently on

the base will help with the height

adjustment) (Fig 17).

• Once you have selected the desired

height, twist clockwise until you feel

the pole lock into place. (Fig 18).

• DO NOT USE THE SCREW on the

pole for height adjustment.

ASSEMBLY INSTRUCTIONS (continued)

• Properly align the Front Grille with the Rear Grille (Fig. 16). To secure the Front Grille onto the

fan, raise the built-in clips around the Front Grille and fasten these clips onto the Rear Grille.

Fig.18Fig.17

Fig.16

REMOTE CONTROL BATTERY INSTALLATION/REPLACEMENT INSTRUCTIONS

A. Remove battery door by sliding downward in direction of arrow.

B. Insert 2 AAA batteries (not included) into the remote following

the directional guides in the recessed slots (Fig. 19).

C. Replace battery door by sliding upward opposite of arrow

direction until door snaps in place.

NOTE: DO NOT MIX OLD AND NEW BATTERIES. DO NOT MIX

ALKALINE, STANDARD (CARBON-ZINC) OR RECHARGEABLE

(NICKEL-CADMIUM)BATTERIES.

SEE RECYCLERS IN YOUR AREA FOR PROPER DISPOSAL OF BATTERIES.

Fig.19