Submittal Sheet

ManualsBrandsHoneywell ManualsHVAC SuppliesSmart VFD HVAC Variable Frequency Drive, 208/230V, 2 HP, NEMA 1, Drive Alone

Table Of Contents

SPECIFICATION DATA

63-4520-08

SmartVFD HVAC

APPLICATION

The SmartVFD HVAC is a variable frequency drive designed

for use in HVAC application to control the speed of HVAC

pumps and fans in order to maximize energy efficiency. Smart

VFD is also designed to run 3 phase standard and high

efficiency induction motors by varying the output voltage and

frequency.

The SmartVFD is easy to install, communicates effectively

with building control systems to minimize energy

consumption.

The SmartVFD BYPASS is easy to specify, select, install and

commission. It is the perfect complement to the advanced

capabilities of the SmartVFD HVAC. The SmartVFD BYPASS

configurations make it easy for you to select the right bypass

to complete your drive package. All configuration are available

in NEMA 1, NEMA 12 and ventilated NEMA 3R.

FEATURES

Easy Communication

• Start-up Wizards—All you have to do is tell the VFD whether

you have a pump or a fan, enter nominal motor information,

and you are up and running

• Graphic Interface—The easy-to-use keypad and interface

deliver menu-driven programming and monitoring for fast,

uniform commissioning. It’s also easy for the building owner

or manager to learn and use, helping to reduce service calls.

Plus, a manual is built into the keypad for easy access when

needed.

• Built-In Communications—With BACnet®, N2 and Modbus

built in, your customers will enjoy a lower total installed cost

and reliable communications with the building management

system.

• PC Software Wizards—Commissioning, programming and

troubleshooting are all a snap thanks to these guided Startup

and PID wizards.

• Built-In PLC—Another reason why SmartVFD HVAC is a great

value for your customers, the built-in PLC eliminates the need

for an expensive external controller.

Built-in Protection

• 5% DC Choke for harmonic protection.

• Standard RFI Filter—Ensures that EMC/RFI requirements are

met.

• Fire Mode for safe operation.

• Enclosure classes NEMA 1, NEMA 12 or NEMA 3R

• Bypass Options—Meet specifications and system critical

applications with a comprehensive bypass offering.

• Motor Switch Ride-Through—Easy, fault-free maintenance.

• Overvoltage trip and undervoltage trip protection

• Ground fault protection

• Mains and motor phase supervisions

• Overcurrent and unit overtemperature protection

• Motor overload, motor stall and motor underload protection

• Short-circuit protection of +24V and +10V reference voltage

Smart Technology

• 6-pulse IGBT, PWM technology

• Intelligent cooling arrangement. Control and power airflow

separated.

• Real-Time Clock—Battery included

• 98% Displacement Power Factor Rating

• 98.5% Efficiency at full load

• 0-320Hz output frequency capabilities

Compliance

• 100KA SCCR (Short Circuit Current Requirement) compliant (except for some HP).

• EMC harmonics: EN 61000-3-12 compliant.

• EMC radio frequencies: EN 61800-3 Category C2 built in. Complies with radiated and conducted emissions.

• RoHS compliant, no electrolytic capacitors, no lead in the circuit boards.

• American Recovery and Reinvestment Act (ARRA).

Summary of content (8 pages)

PAGE 1
SmartVFD HVAC SPECIFICATION DATA FEATURES Easy Communication • • • • • Start-up Wizards—All you have to do is tell the VFD whether you have a pump or a fan, enter nominal motor information, and you are up and running Graphic Interface—The easy-to-use keypad and interface deliver menu-driven programming and monitoring for fast, uniform commissioning. It’s also easy for the building owner or manager to learn and use, helping to reduce service calls.
PAGE 2
SMARTVFD HVAC Table 1. General. Communication RS485 Standard: Modbus™ RTU, BACnet, N2 Ethernet Standard: Modbus/TCP, BACnet/IP Energy-saving functions • Real-time clock for timed functions • Energy monitor for kWh monitoring • Sleep function to minimize downtime energy Protections • • • • 2 * PID For process control Multipump For replacing the pump controller Flying start For tripless catching of spinning fan Software features Process control Keypad Overload and underload protections (e.
PAGE 3
SMARTVFD HVAC SmartVFD BYPASS Features SmartVFD 3-Contactor: Commission, service or replace the VFD without affecting the operation of the motor. Provide additional bypass control capabilities with Auto-bypass and HOA options. • Fused Disconnect • Freeze/Fire/Smoke Interlock • VFD can be isolated from power with motor running in BYPASS mode • TEST position powers the VFD without sending power to the motor The Smart VFD BYPASS is available in 5 configurations as explained below.
PAGE 4
SMARTVFD HVAC Table 4. SmartVFD HVAC Technical Specifications. Mains connection Motor connection Control characteristics Input voltage Uin 208...240V; 380…480V; -10%…+10% Input frequency 47…66 Hz Connection to mains Once per minute or less Starting delay 4 s (Frame4 to Frame6); 6 s (Frame7 to Frame9) Output voltage 0-Uin Continuous output current IL:Ambient temperature max. +104°F, overload 1.1 x IL (1 min./10 min.
PAGE 5
SMARTVFD HVAC Table 4. SmartVFD HVAC Technical Specifications. (Continued) Protections Overvoltage trip limit Undervoltage trip limit Yes Yes Ground fault protection In case of ground fault in motor or motor cable, only the drive is protected. Mains supervision Yes Motor phase supervision Trips if any of the output phases is missing.
PAGE 6
SMARTVFD HVAC Table 6. VFD Only, 460 Vac. Overall Dimensions HP NEMA 1 NEMA 12 Frame Size Current (A) Width (in.) Height (in.) Depth (in.) Weight (lb) 1.5 HVFDSD3C0015G100 HVFDSD3C0015G200 4 3.4 5 12.9 7.5 13 2 HVFDSD3C0020G100 HVFDSD3C0020G200 4 4.8 5 12.9 7.5 13 3 HVFDSD3C0030G100 HVFDSD3C0030G200 4 5.6 5 12.9 7.5 13 5 HVFDSD3C0050G100 HVFDSD3C0050G200 4 8 5 12.9 7.5 13 7.5 HVFDSD3C0075G100 HVFDSD3C0075G200 4 12 5 12.9 7.
PAGE 7
SMARTVFD HVAC Table 8. NEMA 1 VFD and 2-Contactor Bypass or Fused Disconnect, 460 Vac. Overall Dimensions Disconnect Only HP Bypass No 2-Contactor Bypass No Disconnect Frame Size Current (A) Width (in.) Height (in.) Depth (in.) Weight (lb) 1.5 HVFDSB3C0015G110 HVFDSB3C0015G120 4 3.4 8.9 31.7 10.7 38 2 HVFDSB3C0020G110 HVFDSB3C0020G120 4 4.8 8.9 31.7 10.7 38 3 HVFDSB3C0030G110 HVFDSB3C0030G120 4 5.6 8.9 31.7 10.7 38 5 HVFDSB3C0050G110 HVFDSB3C0050G120 4 8 8.9 31.
PAGE 8
SMARTVFD HVAC Table 10. NEMA 1 VFD and 3-Contactor Bypass with Fused Disconnect, 208Vac.* 3-Contactor BYPASS 3-Contactor BYPASS w/ Fused Disconnect HP w/ Fused Disconnect & Auto-Bypass Frame Size Current (A) 0.75 HVFDSB3A0007G130 HVFDSB3A0007G131 Overall Dimensions Width (in) Height (in) Depth (in) Weight (lb) 4 3.7 8.9 38.7 10.7 44 HVFDSB3A0010G130 HVFDSB3A0010G131 4 4.8 8.9 38.7 10.7 44 1.5 HVFDSB3A0015G130 HVFDSB3A0015G131 4 6.6 8.9 38.7 10.7 44 4 8 8.9 38.7 10.