User manual

4 - 10
Manual Activation Mode
In Manual Activation Mode, you must press the button to scan a bar code.
The scanner scans until a bar code is read, or until the button is released.
Default = Manual Activation Mode On In-Stand, Manual Activation On Out-
of-Stand.
End Manual Activation After Good Read
After a bar code is successfully read, the laser can be programmed either
to remain on and scanning, or to turn off. When End Manual Activation
After Good Read is enabled, the laser turns off and stops scanning after a
good read. If you scan Do Not End Manual Activation After Good Read,
the laser remains on after a good read, but the button must be pressed to
scan the next bar code.
Default = End Manual Activation After Good Read.
* Manual Activation Mode On
In-Stand
Manual Activation Mode Off
In-Stand
* Manual Activation Mode On
Out-of-Stand
Manual Activation Mode Off
Out-of-Stand
* End Manual Activation After
Good Read Out-of-Stand
Do Not End Manual Activation
After Good Read Out-of-Stand
* End Manual Activation After
Good Read In-Stand
Do Not End Manual Activation
After Good Read In-Stand