User manual

5 - 4
Number of LED Flashes
If you have silenced the scanner’s beeper, you may set the number of times the LED flashes when reading bar codes.
Default = 1 LED Flash.
Note: If you have set LED Solid (No Flash) (page 5-5), to anything but Off, that setting will override the LED Flash settings.
In that case, scan the LED Solid Off bar code to turn off this feature, then scan the LED Flash code you wish to use.
LED Flash Rate
If you have silenced the scanner’s beeper, you may set the how quickly the LED flashes when reading bar codes. Default =
Fast Flash.
* 1 LED Flash
5 LED Flashes
10 LED Flashes
25 LED Flashes
* Fast Flash
Medium Flash
Slow Flash