User manual

3 - 24

PDAs/Mobility Systems Devices

You may also use the scanner with a PDA or a Honeywell Mobility Systems device. Scan the bar code below and follow the

instructions supplied with your Bluetooth device to locate the scanner, and connect with it.

Changing the Scanner’s Bluetooth PIN Code

Some devices require a PIN code as part of the Bluetooth security features. Your scanner’s default PIN is 1234, which you

may need to enter the first time you connect to your PDA or PC. The PIN code must be between 1 and 16 characters. To

change the PIN, scan the bar code below and then scan the appropriate numeric bar codes from the Programming Chart

inside the back cover of this manual. Scan Save to save your selection.

Minimizing Bluetooth/ISM Band Network Activity

The settings described below can help you customize the relinking behavior of the cordless area-imaging system to obtain the

best compromise between convenience and low interference.

Note: ISM band refers to the 2.4 to 2.48 GHz frequency band used by wireless networks, cordless phones, and Bluetooth.

Auto Reconnect Mode

Auto Reconnect controls whether or not the scanner automatically begins the relink process when a loss of connection is

detected. When the Auto Reconnect On bar code is scanned, the scanner begins the relink process immediately, without

user intervention. Default = Auto Reconnect On.

Note: If you are connecting to a Bluetooth Interface Module, set Auto Reconnect to Off.

The table below shows the results of the Auto Reconnect On and Off settings:

Event Auto Reconnect On Auto Reconnect Off

Scanner out of range Relink occurs automatically. If maximum

number of link attempts is unsuccessful,

then the scanner must be relinked by

either pulling the trigger, placing the

scanner in the base, or scanning the

Access Point linking bar code. (See

"Maximum Link Attempts" on page 3-25.)

The scanner is relinked by pulling the

trigger, or scanning the Access Point

linking bar code.

BT Connection - PDA/Mobility Systems Device

Bluetooth PIN

* Auto Reconnect On

Auto Reconnect Off