Split Air Conditioner Manual
Table Of Contents
- Slide Number 1
- Slide Number 2
- Slide Number 3
- Slide Number 4
- Slide Number 5
- Slide Number 6
- Slide Number 7
- Slide Number 8
- Slide Number 9
- Slide Number 10
- Slide Number 11
- Slide Number 12
- Slide Number 13
- Slide Number 14
- Slide Number 15
- Slide Number 16
- Slide Number 17
- Slide Number 18
- Slide Number 19
- Slide Number 20
- Slide Number 21
- Slide Number 22
- Slide Number 23
- Slide Number 24
- Slide Number 25
- Slide Number 26
- Slide Number 27
- Slide Number 28
- Slide Number 29
- Slide Number 30
4. DISPLAY
• Press this button to turn on/off the display. This is for the convenience of users
who are uncomfortable sleeping with the backlight on.
5. SENSE
• Press this button to set the temperature display on the remote controller to the
temperature around the remote. Press this button again to set it to preset
temperature.
1. ON / OFF
• Press this button to turn on/off the unit.
• This will clear the existing timer and sleep
settings.
2. °C / °F
• Press this button to set the temperature
display to Fahrenheit, which is displayed
by default in Celsius. The “°C” will not be
displayed on the LCD.
• Press this button again to restore the
temperature display to Celsius.
3. SPEED
• Press this button, you can select the fan
speed as follows: Low -> Mid -> High ->
Auto
NOTE: AUTO air speed is not available in
FAN mode.
REMOTE CONTROL FUNCTIONS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
21
NOTE:
The remote controller displays all symbols during power-on and only those corresponding to
operation the rest of the time.
SET TEMPERATURE
AUTO
COOL
DRY
HEAT
FAN
HIGH
MID
LOW
ON/OFF
MODE TURBO
ANTI-M
SET
SPEED
SLEEP ⁰C / ⁰F DISPLAY
SENSE
TIMER
ECO
CLEAN
SWING
SWING