Use and Care Manual
Table Of Contents
- Slide Number 1
- Slide Number 2
- Slide Number 3
- Slide Number 4
- Slide Number 5
- Slide Number 6
- Slide Number 7
- Slide Number 8
- Slide Number 9
- Slide Number 10
- Slide Number 11
- Slide Number 12
- Slide Number 13
- Slide Number 14
- Slide Number 15
- Slide Number 16
- Slide Number 17
- Slide Number 18
- Slide Number 19
- Slide Number 20
- Slide Number 21
- Slide Number 22
- Slide Number 23
- Slide Number 24
- Slide Number 25
- Slide Number 26
- Slide Number 27
- Slide Number 28
- Slide Number 29
- Slide Number 30
Fan Operation Mode
1. Press the “MODE” button, select the fan operation mode.
2. By pressing the “SPEED” button, you can select the fan speed from LOW, MID,
HIGH.
3. Press the “ON/OFF” button, the air conditioner starts to operate.
4. Press the “ON/OFF” button again, the air conditioner stops.
NOTE: In the fan operation mode, the temperature settings is non-effective.
Drying Operation Mode
1. Press the “MODE” button, select the drying operation mode.
2. By pressing the “
˄” or “˅” button, you can set the temperature, the display
changes as you touch the button.
3. By pressing the “SPEED” button, you can select the fan speed from LOW, MID,
HIGH, AUTO.
4. Press the “ON/OFF” button, the air conditioner starts to operate.
5. Press the “ON/OFF” button again, the air conditioner stops.
Backlight Function
• The remote controller has a backlight which can be turned on by pressing any
button for the convenience of operation in darkness. The backlight will be
automatically turned off if there is no operation within 10 seconds.
AIR CONDITIONER OPERATION
25