Use and Care Manual
Table Of Contents
- Slide Number 1
- Slide Number 2
- Slide Number 3
- Slide Number 4
- Slide Number 5
- Slide Number 6
- Slide Number 7
- Slide Number 8
- Slide Number 9
- Slide Number 10
- Slide Number 11
- Slide Number 12
- Slide Number 13
- Slide Number 14
- Slide Number 15
- Slide Number 16
- Slide Number 17
- Slide Number 18
- Slide Number 19
- Slide Number 20
- Slide Number 21
- Slide Number 22
- Slide Number 23
- Slide Number 24
- Slide Number 25
- Slide Number 26
- Slide Number 27
- Slide Number 28
- Slide Number 29
- Slide Number 30
Important Notices
• Before installing, please contact a local HVAC professional. If the unit is not
installed by a registered HVAC contractor, the warranty will be voided. Please
request a copy of the HVAC contractor’s invoice at the end of installation and keep
for your records.
• The air conditioner must be installed by professionals according to the national
wiring rules and this manual.
• To move and install the air conditioner in another place, please contact a certified
HVAC professional.
Requirements for Installation Location
• Avoid places of inflammable or explosive gas leakage or where there are strongly
aggressive gases.
• Avoid places subject to strong artificial electric/magnetic fields.
• Avoid places subject to noise and resonance.
• Avoid severe natural conditions (e.g., heavy lampblack, strong sandy wind, direct
sunshine, or high temperature heat sources).
• Avoid places within the reach of children.
• Allow for a short connection between the indoor and outdoor units.
• Select where it is easy to perform service and repair, also where ventilation is
good.
• The outdoor unit shall not be installed in any way that could occupy an aisle,
stairway, exit, fire escape, catwalk, or any other public area.
• The outdoor unit shall be installed as far as possible from doors, windows, and
plants/trees.
Requirements for the Mounting Plate
• The mounting plate must meet the relevant national or industrial standards in
terms of strength with welding and connection areas rustproofed.
• The mounting plate and its load carry surface shall be able to withstand 4 times
above the weight of the unit, or 440.9 lbs., whichever is heavier.
• The mounting plate of the outdoor unit shall be fastened with an expansion bolt.
• Ensure a secure installation to prevent damage to surrounding areas.
NOTE: Mounting plate not included.
7
NOTICE FOR INSTALLATION