Installation Guide

• This appliance is not intended for use by persons

(including children or elderly) with reduced physical,

sensory or mental capabilities, or lack of experience

and knowledge, unless they have been given

supervision or instruction concerning use of the

appliance by a person responsible for their safety.

• Never clean parts with ammable uids. The fumes

can create a re hazard or explosion.

• Do not store or use gasoline or any other ammable

vapors and liquids in the vicinity of this or any other

water dispenser. The fumes can create a re hazard

or explosion.

•

Keep this instructions handy for future reference.

POWER:

Press on the hot or cold switches on the back of the

unit to turn on the hot and cold functions. DO NOT

turn on both switches at the same time. Please refer

to INSTALLING YOUR WATER COOLER FOR THE FIRST

TIME section.

WATER TAPS:

Push in the hot or cold water levers with a cup or

container to dispense the desire water temperature. To

use the hot lever, press the middle red button (safety

lock) and simultaneously push in the lever.

DRAIN CAP:

Remove the plastic cover using a Phillips screwdriver

(not included). Remove the rubber cover

from the drain pipe to drain the water from the tanks. To

close it place the rubber cover on the drain pipe and

secure the plastic cover back again.

SAFETY

LOCK

3. IMPORTANT SAFETY INSTRUCTIONS

4. FUNCTION BUTTONS

OFF