Use and Care Manual

4. Clean the post filter (B) outside by blowing air backwards through it and/or shaking it

rapidly up and down.

1. Store vacuum cleaner above freezing temperature, 32°F / 0°C.

2. See Figure 12.

a. Place the hand tube in the holder for hand tube (A)

b. The crevice tool / brush tool can be stored on the machine (B)

c. Place cord on cord hook (C)

WARNING: When not in use: disconnect the power cord from the electrical outlet.

Repair or service of electrical components such as cord or motor, must only be carried out by an

authorized service center.

Vacuum cleaner does not

start:

 Check to see that the plug is correctly inserted in the

electrical outlet and that there is power at receptacle.

 A circuit breaker may have tripped. Check the circuit breaker

box.

 The cord or plug may be damaged. Call the Customer

Service Department to get the nearest authorized service

center.

Motor stops:

 A thermal overload protector will shut off the motor if the

motor temperature is too high. If this occurs, turn the switch

AFTER USE, STORAGE

TROUBLE SHOOTING

Figure 12