OPERATION MANUAL Built-in x35 ZOOM / WDR High Resolution AUTO FOCUS CAMERA HZC-855NX/PX Series READ AND KEEP THIS OPERATION MANUAL
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. PREFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Indicate a potentially hazardous situation which if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices. Warning: This equipment generates and uses radio frequency energy and if not installed and used properly, I.e.
CAUTION FOR SAFE OPERATION 1. Water and Moisture To prevent fire or shock hazard, do not expose this camera to rain or moisture. 2. Servicing Do not attempt to disassemble or repair by yourself. You may be exposed to dangerous voltage or other hazards. Note that all servicing is qualified service personnel. Modifications not approved by manufacturer could void the user's authority to operate the equipment. 3.
CONTENTS 1. Features --------------------------------------------------------------- 5 2. Terms & Functions ------------------------------------------------ 6 3. Installation ------------------------------------------------------------ 7 4. Camera Control Methods ------------------------------------------- 8 5. On Screen Display -------------------------------------------------- 10 6. Specifications --------------------------------------------------------- 21 7.
1. Features Ideal Digital Video Camera for Security Privacy Zone Masking The HZC-855NX/PX Ser. is a compact camera that offers easy system integration. Coming with the built-in zoom lens, the user can monitor the scene from variable angle without the extra lens. With the DSP technology, such intelligent controls as auto iris, and auto white balance are possible to realize clear detailed picture.
2. Terms & Functions FAR(-) BUTTON VIDEO OUTPUT TELE(UP) BUTTON This is the output terminal for composite video signal . NEAR(+) BUTTON VIDEO S-VIDEO OUTPUT SVIDEO MENU BUTTON This is the output terminal for separate Y/C signal . WIDE(DOWN) BUTTON POWER INPUT TERMINAL DC 12V ( Please use a specified adaptor) POWER ON LAMP In power ON state , this LED is ON . CAMERA CONTROL CONNECTOR This is the 14 pin connector for external camera controls . ( Refer to 4.
3. Installation 3.1 Check all accessories with enclosed package . - HZC-855NX/PX Ser. SET - 14 PIN CONNECTION CABLE (150mm) - OPERATION MANUAL HZC-855NX/PX Ser. * CABLE DESCRIPTION 1. KEY1 ( RED ) 3. ZOOM ( GREEN ) 5. MENU ( WHITE ) 7. GND ( BLACK ) 9. R+/NC ( BROWN ) 11. T+/TD ( VIOLET ) 13. EXT_VD ( WHITE ) 14 PIN CABLE* 2. 4. 6. 8. 10. 12. 14.
4. Camera Control Methods 4.1 Remote Control using for Hard wired connection ( Connector pin 3,4,5,6 ) Controller TELE (-) WIDE(+) 14P Cable NEAR(+) FAR (-) MENU ON 4.
4.3.
FUNCTION 5. On Screen Display ⑧ ① Non display ⑧ ② ③,④ ⑤ OSD Format ① Focus Mode ② Back Light ③ Flickerless MF ⑥ ④ ⑦ ⑤ ⑧ Night Mode a. Pressing the MENU key softly confirm current Operating OSD. It is disappeared about five seconds later if there are no other key actions. ⑥ b. When it zoom in or out pressing TELE(up) or WIDE(down) key, whole Operating OSD is displayed and then disappeared.
5.2 OSD SETUP MENU Structure SETUP MENU LENS MODE ZOOM SPEED START ZOOM END ZOOM E-ZOOM AF MODE O. RESET O. AF TIME AF SENS. MIN. DIST. 1 ~ 10 x1 ~ x34 X35 ~ x90 ON/OFF ONESHOT/MANUAL.. ON/OFF 1 ~ 10 HIGH/ LOW/AF SENS 1cm ~ INF. MODE CONTROL RED GAIN BLUE GAIN ATW/AWC/MWB/… AUTO/LOCK/… 0 ~ 255 0 ~ 255 MODE LEVEL BLC/H.BLC/WDR/… 0 ~ 15 AE MODE WB MODE NIGHTSHOT MODE BLC/WDR MODE PZM SETTING CAMERA ID SETTING CAMERA ID DISPLAY POSITION 0 ~ 255 CAM ID/TITLE R.BOT/L.TOP/L.
5.2 Display SETUP MENU 5.4 Quit SETUP MENU a. Press MENU key above 2 seconds so that SETUP MENU 1 is displayed on the screen. b. Select item of SETUP MENU using TELE(up) / WIDE(down) key. c. NEAR(+) / FAR(-) key is used to increase / decrease data of selected item. << SETUP MENU >> LENS MODE AE MODE WB MODE NIGHTSHOT MODE BLC/WDR MODE PZM SETTING CAMERA ID SETTING SPECIAL FUNCTION FACTORY DEFAULT << LENS MODE ZOOM SPEED START ZOOM END ZOOM E-ZOOM AF MODE O.RESET O.AF TIME AF SENS. MIN. DIST.
④ E-Zoom Control : ON means up to x230, OFF means only optical zoom region. E-ZOOM OFF → ON → . . . . ⑥ ONESHOT AF RESET : Use in case of focus deviation due to impact, vibration etc. Auto Focusing is operated during set time. O.RESET OFF → ON → …. ⑤ Set Focus Mode : It is composed of three modes. ☞ caution 1. It happens focus deviation according to circumstance condition ( brightness, facility to focus the object, etc ). AUTO :Use to focus automatically all the time.
② LOW SHUTTER Speed : In Shutter Fix,Manual Mode, range is from 1/30 sec (2 fields) to 2 sec (128 fields). LOW SHUTTER OFF → 2 FLDS ~ 128FLDS (FLDS means how many times integrated of CCD signal.) << SETUP MENU >> LENS MODE AE MODE WB MODE NIGHTSHOT MODE BLC/WDR MODE PZM SETTING CAMERA ID SETTING SPECIAL FUNCTION FACTORY DEFAULT ③ HIGH SHUTTER Speed : In Shutter Fix,Manual Mode, range is from 1/60 sec to 1/10,000 sec. HIGH SHUTTER 1/60 → 1/100 → . . . .
⑧ MAX FIELDS (option) : Use for compensating the low illumination condition. In case that use this function because of low illumination condition, adjust maximum integration fields to get brighter and dynamical image. But the scene becomes slower than OFF mode. The larger max fields is, simultaneously the noise of image is larger. This is phenomenon because too small video output is integrated on many fields memory.
③ RED GAIN (Range is different on each Mode.) : Adjust RED Gain, and tune the sensitivity of white point. MANUAL 0 → 1 → …. → 254 → 255 ④ Turnover LEVEL from DAY TO NIGHT : Set the LEVEL to turnover from Day to Night. D→N LEVEL 0.1 lx → 1 lx → 10 lx → …. ④ BLUE GAIN (Range is different on each Mode.) : Adjust BLUE Gain, and tune the sensitivity of white point. MANUAL 0 → 1 → …. → 254 → 255 ⑤ Turnover LEVEL from NIGHT TO DAY : Set the LEVEL to turnover from Night to Day.
5.9 BLC/ WDR Mode << SETUP MENU >> LENS MODE AE MODE WB MODE NIGHTSHOT MODE BLC/WDR MODE PZM SETTING CAMERA ID SETTING SPECIAL FUNCTION FACTORY DEFAULT ① Backlight Compensation Mode : It is for preventing the center object too darken when the excessive light is behind the center object. Set BACKLIGHT ON, then brighten the center object in the contrast to the background light. Press NEAR/ FAR key in 2 sec, Backlight mode become AUTO. MODE OFF → BLC → H.BLC → WDR → …. H.
Quick setting method for Privacy Zone Masking 5.11 Camera ID SET ① ID SET : Camera ID is indicating number assigned each Camera in case of controlling many Cameras. It is from 0 to 255. But in case of 0, that is not displayed on screen. It is always displayed even though whole Operating OSD is disappeared on the screen. But it is possible to make non display and to choose display position (BOTTOM RIGHT, TOP RIGHT, TOP LEFT) by RS-232C communication. CAMERA ID 0 ~ 255 1.
④ Title : It is the name of Camera. It enters 10 characters including blank.. << SETUP MENU >> LENS MODE AE MODE WB MODE NIGHTSHOT MODE BLC/WDR MODE PZM SETTING CAMERA ID SETTING SPECIAL FUNCTION FACTORY DEFAULT TITLE: ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ▣ How to Enter the Title ▣ Let’s enter the Title as “R1” , example -. Select the position of title character by using Near or Far key. The chosen position is blinking. (Only chosen Cursor will be blink as “■”, rest of them will be shown as a blank “ ”.) 5.
⑤ Freeze Mode : It pause current image. ON is to stop, OFF is to return to normal state. FREEZE ON → OFF → …. ☞ caution 1. Freeze image does not save when you reset the system. This system doesn’t have its’ own memory. ⑥ BAUD RATE : Use to communicate through RS232C, RS485, RS232TTL . BAUDRATE 4800bps → 9600bps → …. → 312kbps ☞ caution 1. If the Baud Rate does not match between Camera and external system, it may occur the communication failure. Please make sure a proper Baud Rate.
6. Specification Model Name HZC-855NX HZC-855NX-VR HZC-855PX 1/4” Sony Double Scan CCD ( Ex-View CCD ) Pick up Device 410,000 / 380,000 Total/Effective Pixels 470,000/440,000 2:1 Interlace Scanning System Optical x35, f = 3.6~126mm, F1.65(WIDE) ~ F4.2(TELE) Lens x36 ~ x90 can be adjustable Digital Zoom Ratio Sync. System Internal line lock/ VD pulse lock( AutoDetect) H. Resolution More than 530 TV Lines S/N Ratio Min. illuminance More than 50 dB ( AGC OFF ) More than 49 dB ( AGC OFF ) 0.
7.
MEMO Honeywell Co., Ltd. Address : 17F, Kukje Center Building 191, Hankangro -2ga, Yongsan-gu, Seoul 140-702, Korea Phone : 82-2-799-6109, 6108, 6107, 6292 Fax : 82-2-749-6119 http : //www.honeywell.co.kr/security/english E-mail : info.security@honeywell.
