User's Manual

5
Thermal
85
°C
As measured by
Shutdown
sensor on module
Thermal
75
°C
Recovery
Transceiver Specifications
Output Power Control 29.5 dBm. User adjustable in 1 dB down to
10.5 dBm. Tolerance drift from +0.5 to -0.7.
Bus Interface (USB or serial) USB 2.0 compliant client 12 Mbps (full speed)
Serial 115.2 Kbps
RF Output Impedance 50 Ohms with better than 10 dB return loss
Modulation PR-ASK
Data Encoding DRM or FM0
RF Sensitivity DRM: Monostatic 15 dB S/N Power [dBm]
ON: -70 dBm
RF sensitivity is the minimum RF conducted
power for measuring a given 15 dB return loss
on the antenna port.
Tags/Protocols Supported
EPC Class 1 Gen 2, UHF Version 1.2.0
ISO 18000-6C
NXP SL3ICS1002 G2XM, can read 512-bit
extended user memory and custom
commands
Fujitsu FJ64 Kb
Impinj Monza 4QT
Tag Data Rate EPC Class 1 Gen2, ISO 18000-6C
DRM back link frequency up to 320 KHz
FM0 back link frequency 160 KHz
Read Range
>6 m (20 ft), provided that the module:
•
is using DRM operation mode.
•
isconnected to an antenna system with 9
dBiC gain (circular polarized).
•
has no occurrence of multipath or other
environmental interference.
Read Speed >200 tags per second (using 32 conducted
Specification Values