Multi-Function Display/GPS Pilot's Guide

1-8
Rev 4 Aug/2007
KMD 250 Pilot's Guide
Section 1
Basic Operation
General Information
STARTUP DISPLAYS
At power-up, the startup logo displays will be seen.
If Stormscope® is installed with the
system, a display similar to the one at
the right will be seen.
After the completion of the Self Test,
press the OK Softkey.
One of the following Instrument Panel Self Test Pages will be displayed
depending on whether the unit is equipped with an internal GPS or is the
non-GPS version.
Non-GPS KMD 250
KMD 250 with Internal GPS