Dolphin® 9700 Mobile Computers with Windows Mobile® 6.
Disclaimer Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been made. The information in this publication does not represent a commitment on the part of HII.
Table of Contents Chapter 1 - Agency Information Label Locations ....................................................................................................................1-1 LED Safety Statement .........................................................................................................1-2 Infrared LED Safety Statement ............................................................................................1-2 UL and cUL Statement...................................................
Resetting the Terminal ...................................................................................................... 3-16 Soft Reset (Warm Boot)............................................................................................... 3-16 Hard Reset (Cold Boot) ............................................................................................... 3-16 Suspend Mode ..................................................................................................................
System Menu....................................................................................................................... 7-7 About ............................................................................................................................. 7-8 Backlight ........................................................................................................................ 7-9 Certificates..............................................................................................
Voice Communication.......................................................................................................... 9-4 Audio Modes.................................................................................................................. 9-4 Volume Control .............................................................................................................. 9-5 Accessing the Dialer Window ........................................................................................
Communicating with the Dolphin Terminal ........................................................................ 12-7 Verifying Data Transfer................................................................................................ 12-7 RS232 Communications Cables........................................................................................ 12-7 RS232 Pin Configuration ............................................................................................. 12-8 Mounting.................
viii
1 Agency Information Dolphin 9700 mobile computers meet or exceed the requirements of all applicable standards organizations for safe operation. However, as with any electrical equipment, the best way to ensure safe operation is to operate them according to the agency guidelines that follow. Read these guidelines carefully before using your mobile computer.
LED Safety Statement The LED output on this device has been tested in accordance with IEC60825-1 LED safety and certified to be a Class 1 LED device. The maximum power outputs for each diode are as follows: • Illumination LED: 194.0 uW, wavelength: 626nm+/-30nm • Aimer laser (5300 engine): 360.1 uW, wavelength: 655nm • Aimer LED (5100 engine): 81.6 uW, wavelength: 526nm+/-30nm Infrared LED Safety Statement Caution! Do not view directly with optical instruments.
R&TTE Compliance Statement—802.11a/b/g, Bluetooth, and/or GSM Dolphin RF terminals are in conformity with all essential requirements of the R&TTE Directive (1999/5/ EC). This product is marked with in accordance with the Class II product requirements specified in the R&TTE Directive. In addition, this product complies to 2006/95/EC Low Voltage Directive when supplied with the recommended power supply. Honeywell shall not be liable for use of our product with equipment (i.e.
Canadian Compliance This Class B digital apparatus complies with Canadian ICES-003. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding.
2 Getting Started Out of the Box Verify that the carton contains the following items: • Dolphin 9700 mobile computer (the terminal) • Main battery pack (7.4V Li-ion) • Quick Start Guide Note: If you ordered accessories for your terminals, verify that they are also included with the order. Be sure to keep the original packaging in the event that the Dolphin terminal should need to be returned for service. For details, see Product Service and Repair on page 16-1. Step 1.
Step 2. Charge the Main and Backup Batteries The power supply for Dolphin terminals consists of two types of battery power: the main battery pack that is accessible from the back panel, and the backup battery that resides inside the terminal. The main battery powers the terminal. The internal backup battery charges off the main battery and maintains the application data stored in RAM memory for up to 30 minutes when the terminal’s main battery pack is completely discharged or removed.
Step 4. Set the Time Zone, Time, and Date On the Today screen, tap the line that displays the time and date. The Clock Settings screen appears. Tap the arrow to the right of the time zone to open the drop down menu. Select the appropiate time zone from the menu. Set the correct time and date in the remaining fields and tap OK to save. Today Screen After the Dolphin terminal initializes the first time, you see the Today screen.
Navigation Bar The Navigation bar, located at the top of the screen, displays the active program and current time. It also provides access to the Start menu, which allows you to open programs and access the system settings. Start menu: Grants access to system functions. Note: Icons here indicate the status of various system functions. Tapping the battery icon at the top of the screen does not open the Power applet with this version of Microsoft Windows Mobile.
Icons in the Navigation Bar Indicator Meaning Battery has a high charge Battery has a medium charge Battery has a low charge Battery has a very low charge and requires charging Terminal is running on external power. If a battery pack is installed, the battery is charging in the background. The terminal is not connected to external power. A battery is installed, but is defective; specifically, its charge level cannot be measured.
Icons in the Navigation Bar Indicator Meaning The radio is connected. The bars indicate the signal strength. No radio signal The terminal is searching for a signal. Wi-Fi is on, but device is not connected Wi-Fi data call Pending alarm Bluetooth Command Bar The Command bar is located at the bottom of application windows. The Task tray displays icons for programs running in the background. Menus change according to the open application.
Selecting Programs To see the programs loaded on your terminal, tap program, tap once on the program icon. ® Start to access the Start Menu. To open a To move an icon to the top of the Start Menu, tap and hold the stylus on the icon you want to move. Tap on Move to Top. File Explorer You can also use the File Explorer to find files and organize these files into folders. Tap Start > File Explorer . Tap the Up button at the bottom of the screen to move up one level in the directory.
You can move files in File Explorer by tapping and holding on the item you want to move, and then tapping Cut or Copy on popup menu. Navigate to the folder you want to move the file to, and then tap and hold a blank area of the window. Tap Paste on the pop-up menu. Note: If there is no blank space available in the window, tap Menu on the command bar, navigate to the end of the menu using the down arrow, and then tap Edit > Paste. Search The Search feature helps you quickly locate information.
3 Hardware Overview Standard Configurations for the 9700 WLAN & WPAN • • • • Microsoft® Windows Mobile® 6.5 Classic Marvell® PXA270 624 MHz 256MB SDRAM X 1GB Flash Two keyboard options: 45-Key Qwerty or 31-Key Numeric • 7.4V Li-ion rechargeable battery pack • Adaptus Imaging Technology: 5100SR/SF or 5300SR/SF/HD image engines • 802.11a/b/g and Bluetooth WLAN, WPAN, with GPS • • • • • • • • • Microsoft® Windows Mobile® 6.
• Two keyboard options: 45-Key Qwerty or 31-Key Numeric • 7.4V Li-ion rechargeable battery pack • Adaptus Imaging Technology: 5100SR/ SF or 5300SR/SF/HD image engines • 802.11a/b/g, Bluetooth, and GSM/GPRS/ EDGE/UMTS/HSDPA • GPS • 2 mega pixel auto control color camera Some configurations of the 9700 terminal are available with an external housing made of plastic that is specifically designed for the healthcare industry. For more information, see Healthcare Housing on page 3-12.
Accessories for the 9700 Each of the following items is sold separately to enhance your terminal’s capabilities. Note: When using accessories where the terminal is worn on the body, the terminal’s touch panel must face away from the body. Dolphin 9700 Mobile Charger The Dolphin 9700 Mobile Charger is a charging cable that connects the terminal directly to a 12 Volt DC power source, such as a cigarette lighter port inside a vehicle, eliminating the need for a cradle.
Front Panel: 9700 Power Key Front Speaker Indicator LED Touch Panel Display Navigation Keys SCAN Key Recessed Keyboard Microphone I/O Connector For a description of each callout, see Front Panel Features for the 9700 on page 3-5.
Front Panel Features for the 9700 Blue Modifier Key See Using the Modifier Keys on page 6-3. Front Speaker The front speaker is the receiver for handset voice calls. See Voice Communication on page 9-4. Indicator LED The light emitting diode (LED) located at the top of the LCD display flashes and illuminates during resets and scanning/imaging. This LED can be programmed by various software applications. Microphone The integrated microphone that provides audio input for handset and speakerphone voice calls.
Back Panel: 9700 Image/Scan Engine Window Fastener for the Stylus Color Camera Rear Speaker Flashlight/Camera Flash Hand Strap Battery Door IrDA Port Stylus Slot For a description of each callout, see Back Panel Features for the 9700 on page 3-7.
Back Panel Features for the 9700 Battery Door The battery door secures the Li-ion battery pack in the terminal’s battery well. For more information, see Batteries on page 3-13. Color Camera The 2.0-Megapixels Resolution (1600 x 1200 pixel) color camera provides easy piture capture with Automated Camera Control (ACC). Additional features include automated picture profiles and an Application Programming Interface (API).
Stylus Slot The stylus is used to operate the touch panel. The back panel of the terminal features a storage slot to hold the stylus when not in use. The stylus features a special tip for added accuracy and ease of use. Side Panels: 9700 The left and the right side panels of the Dolphin contain different features. Left Side Left Button IrDA Port Stylus Slot Left Button By default, the Left Button triggers the scanner/imager. You can reassign the button to launch applications or execute commands.
Installing a Memory Card 1. Press the Power key to put the terminal in Suspend Mode. 2. Release the hand strap near the base of the terminal. 3. Remove the battery door and the battery. 4. Remove the protective cover over the memory socket. 5. Unlock the access door to the memory socket by sliding the door away from the serial number label located in the battery well. 6. Lift the door up to expose the socket. 7. Insert the microSD or microSDHC card into the socket.
Bottom Panel: 9700 Pin Description 1 GND 2 MIC_IN 3 RI 4 USB_D- 5 USB_D+ 6 AUDIO_GND 7 USB_5V_IN 8 5V_OUT 9 TXD 10 RXD 11 RTS 12 CTS 13 DTR 14 DSR 15 MONO SPEAKER 16 VDC_IN 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 Note: Signals referenced are for a DTE device. I/O Connector The I/O connector powers the terminal, charges the main battery, and facilitates communication. All Dolphin peripherals are designed to work exclusively with this connector.
Using the Touch Panel Honeywell defines proper use of the terminal touch panel as using a screen protector and proper stylus. Screen protectors maintain the ongoing integrity (i.e., prevent scratching) of the touch panel, which is why their use is recommended for applications that require a high to medium level of interface with the touch panel, such as signature capture for proof of delivery. Honeywell advocates the use of screen protectors on all Dolphin devices.
Healthcare Housing Some configurations of the 9700 terminal are available with an external plastic housing that is designed to resist the effects of harsh chemicals in a healthcare environment. The plastic is crystalline in nature, which helps prevent chemicals from seeping through the housing. Important! The following cleaning solutions have been tested to assure safe cleaning of your terminal’s disinfectant-ready housing. They are the only solutions approved for use with these terminals.
Batteries There are two types of battery power: the main battery pack installed in the back panel and the backup battery located inside the terminal. They are designed to work together to prevent data loss when the terminal is in use over long periods. Both batteries must be completely charged before using a Dolphin terminal for the first time! Main Battery Pack ! We recommend use of Honeywell Li-Ion battery packs. Use of any non-Honeywell battery may result in damage not covered by the warranty. The 7.
• If you observe that the Honeywell battery supplied is physically damaged, please send it to Honeywell International Inc. or an authorized service center for inspection. Refer to the Product Service and Repair section of this guide. • Although your battery can be recharged many times, the battery life is limited. Replace it after the battery is unable to hold an adequate charge.
The default values for these entries are as follows: MedState=25% This sets the Low Battery point to 25%. When the battery hits the percentage charge specified here, the user is notified. LowState=10% This sets the Critical Battery point to 10%. When the battery hits the percentage charge specified here, the user is notified. Note: Warnings do not appear when the terminal is on external power.
Resetting the Terminal There are two types of system resets: a soft and a hard reset. Soft Reset (Warm Boot) A soft reset re-boots the device without losing RAM data. You would perform a soft reset when • the terminal fails to respond. • after installing some software applications. • after making changes to certain system settings, such as network cards. + TAB TAB 1. Press and hold the RED 2. The decode and scan LEDs flash for approximately three seconds as the terminal resets. 3.
4 Using the Scan Image Engine Overview The Dolphin terminal houses a compact image engine that instantly reads popular 1D and 2D bar codes and supports omni-directional aiming and decoding for greater flexibility in real-world settings. The image engine can also capture black and white digital images, such as signatures and pictures of damaged inventory.
Laser Specifications The maximum power outputs for each diode are as follows: • Illumination LED: 194.0 uW • Aimer laser (5300 engine): 360.1 uW • Aimer LED (5100 engine): 81.
Decoding The terminal supports two types of image decoding for use in various bar code reading and imaging applications: full-area imaging and Advanced Linear Decoding (ALD). Full-Area Imaging Full-area imaging provides omni-directional reading of linear and non-linear 1D and 2D bar codes, OCR, signature capture, and picture taking. When reading all bar code types using full-area imaging, a positive read can be obtained from many positions; see Aiming Options on page 4-4.
Aiming Options The aiming beams are smaller when the terminal is held closer to the code and larger when it is farther from the code. Symbologies with smaller bars or elements (mil size) should be read closer to the unit whereas symbologies with larger bars or elements (mil size) should be read farther from the unit. 5300 Red High-Vis Aiming Pattern If your Dolphin terminal is configured with a 5300 imager, high-vis aimers frame the bar code for more intuitive aiming.
Capturing Images The image-capture process is an intuitive, split-second operation for experienced users. By following the basic guidelines, new users can easily develop their own technique and, with practice, quickly learn to adapt it to different application environments. Image Preview When the imaging process is initiated, the touch screen displays a preview of the object. This is a live video image of what the imager is currently viewing.
Enabling the Aimer If your Dolphin terminal is configured with the 5300 imager, you can enable the aiming pattern for imaging in the Imaging Demo. For details about the aimer, see Capturing Images on page 4-5. 1. Tap Start > Demos > Imaging Demo > Setup menu > Aimer. 2. The aiming pattern is now enabled for imaging. Uploading Images Image files can be uploaded to a host workstation via Microsoft ActiveSync and a Dolphin communication peripheral or your wireless radio connection.
5 Using the Color Camera Overview All Dolphin terminals are equipped with a color camera with 2.0-Megapixels Resolution, Automated Camera Control (ACC), and an Application Programming Interface (API) that provides easy integration of color picture and video capture into business applications. The camera lens and camera flash are located on the back panel of the terminal. Taking a picture using the Camera Demo tool 1. Tap Start > Demos > Camera Demo 2.
Options Tap Options > Camera. The Camera Options menu appears. There are five tabs of configurable options accessible from the Camera Options menu. Profile Tab Display Tab The profile tab allows you to customize your camera settings, or chose from several predefined profiles designed to provide the best picture quality for common tasks. Capture Tab Caption Tab File Tab Taking a picture using the Windows Mobile 6.5 Camera tool 1. Tap Start > Pictures & Videos > Camera 2.
Menu Tap Menu on the Command Bar to adjust the camera settings, switch to video mode, and access additional camera options. Item Descriptions Video Activate Video Mode Mode Normal Mode, Burst Mode, Timer Mode Resolution Set picture resolution (i.e., 320 x 240, 640 x 480, 800 x 600, 1600 x 1200) Zoom Set zoom (i.e., x1, x2, x3, and x4) Flash Camera Flash On or Camera Flash Off Focus Focus On, Focus Off, Focus on Trigger, or Fixed-Focus Brightness Set the brightness setting from +2.0 EV to -2.
5-4
6 Using the Keyboards Available Keyboards There are two keyboard options in the 9700 series: 31-Key Numeric Keyboard 45-Key QWERTY Keyboard SCAN SCAN VOL PG TAB ® ENT ® F1 @?! 1 ESC VOL PG TAB ENT 4 F4 GHI 7 F7 PQRS *. 2 F2 ABC F3 DEF 3 5 F5 JKL F6 6 MNO 8 F8 TUV F9 WXYZ 0 F10 & 9 ALT SP # , ! F1 Q @ 1 F2 W 4 2 F3 3 F4 E $ F5 R 5 6 Y ; - F8 ) F7 ( F6 T I U : “ + F9 O ? A S D F G H J K * 7 8 9 # / \ - Z X C 0 .
Using the Function Keys Name Key Function Turns the keyboard backlight on and off. Backlight Numeric Keyboard & ESC Blue QWERTY Keyboard Backspace Enter (ENT) Escape (ESC) Moves the cursor back one space each time the key is pressed. If you are typing text, it deletes the previous character each time it is pressed. Confirms data entry. ENT Cancels the current action.
Using the Modifier Keys Name Key Shift Function The shift key modifies only the next key pressed; it must be pressed before each key you wish to modify. Shift toggles the keyboard between uppercase alphabet mode and lowercase alphabet mode. Press the shift key twice to toggle Caps Lock on and off. When Caps Lock is toggled on, characters are uppercase; when toggled off, characters are lowercase.
31-Key Numeric Keyboard SCAN key Navigation keys Left Soft key Right Soft key SCAN Tab key VOL PG TAB Send key Enter key ENT End key ® Backlight key Escape key ESC Shift key 1 F1 @?! 2 F2 ABC 3 4 F4 GHI 5 F5 JKL F6 6 MNO F7 7PQRS 8 F8 TUV F9 9 WXYZ 0 F10 & *.
Key Normal Shift Blue Shift-Blue Blue-Lock Red End End (phone call) End (phone call) End (phone call) End (phone call) End (phone call) End (phone call) Escape Escape Backlight Toggles Keyboard Backlight On/Off ESC Escape Escape Escape Escape SHIFT Shift 1 1 ! @,?,! @,?,! @,?,! F1 2 2 @ a,b,c A,B,C a,b,c F2 3 3 # d,e,f D,E,F d,e,f F3 4 4 $ g,h,i G,H,I g,h,i F4 5 5 % j,k,l J,K,L j,k,l F5 6 6 ^ m,n,o M,N,O m,n,o F6 7 7 & p,q,r,s P,Q,R,S p
45-Key QWERTY Keyboard SCAN key Navigation keys Right Soft key Left Soft key SCAN Tab key VOL PG TAB Send key Enter key ENT End key ® ! F1 Q @ A * Z 1 F2 W 2 F3 3 F4 E 4 5 S D 7 8 X C Shift key $ F5 R 0 .
Key Normal Shift Blue Blue-Lock Red ESC Escape Escape Backlight Escape Escape SHIFT Shift A a A @ @ F11 B b B # # F24 C c C 8 8 F22 D d D 5 5 F13 E e E 2 2 F3 F f F 6 6 F14 G g G ; ; F15 H h H : : F16 I i I - (subtract) - (subtract) F8 J j J “ “ F17 K k K ? ? F18 L l L & & F19 M m M \ \ F26 N n N / / F25 O o O + (add) + (add) F9 P p P = = F10 Q q Q ! ! F1 R r R 3 3 F4 S s S 4 4 F12
Key Normal Blue Blue Period . (period) > 0 0 .
7 System Settings Overview Customized settings are available on the Start menu. Tap Start > Settings and the settings screen opens. Icon Description Bluetooth Configures the Bluetooth radio. This icon appears only if a Bluetooth radio and driver are installed on the terminal. See Working with the Bluetooth Radio on page 10-1. Clock & Alarms Set the system clock, date, time and schedule alarms. See Clock & Alarms on page 7-2. Lock Password protect the terminal to limit access to the terminal.
Icon Description Personal Customizes buttons, and set SIP options. See Personal Menu on page 7-3. System Adjusts system settings. See System Menu on page 7-7. Microsoft My Phone Synchronizes your phone’s contacts, calendar, tasks, text messages, music, photos, videos, and other documents with your My Phone account at http:\\myphone.microsoft.com. Clock & Alarms The Clock & Alarms settings can be accessed from the Today screen or the Settings Menu. 1.
Personal Menu To access the Personal Menu, go to Start > Settings > Personal. The screen opens displaying the Personal Menu. Icon Description Buttons Program the side buttons to perform specific tasks. See Buttons on page 7-4. Input Customizes the SIP (soft input panel). See Input on page 7-5. Owner Information Enter your contact information. This information will appear on the Today screen. Phone When the GSM radio is enabled, tap this icon to set up user parameters.
Buttons The Buttons setting programs certain keyboard buttons to launch applications or execute commands. Enable HotKeys Default Buttons setting assignments are inactive until you enable the HotKeys Power Tool. Tap Start > Power Tools and tap the HotKeys icon once. HotKeys is enabled, and the button assignments in the Buttons setting are active. For more information about the HotKeys Power Tool, refer to the Dolphin Power Tools User’s Guide, which is available for download from the web at www.
Additional Functions The Assign a program list also contains the following commands: Command Description Performs the same function as tap-and-hold to open the context menu for the control. Opens the soft input panel. Opens the menu or performs the action displayed on the left side of the Command bar. Nothing happens when the button is pressed. Performs the same function as tapping OK on the screen.
Using File Explorer If you do not see the program listed, you can either use File Explorer to move the program or ActiveSync on the workstation to create a shortcut to the program and place the shortcut in the Start Menu folder. Note: We recommend that you Copy and Paste Shortcut so that you do not alter your program configurations by accident.
Using ActiveSync on the Workstation Here, you are performing the same basic process as on the terminal, except that you are using the Explore utility (Windows Explorer) to copy and paste the shortcut. 1. Open ActiveSync > Explore and navigate to the program. 2. Right-click on the program and select Create Shortcut. 3. Select the shortcut, right-click, and select Cut. 4. Navigate to the Start Menu folder (Windows > Start Menu). 5. Right-click on an empty area and select Paste Shortcut. 6.
Icon See Page Error Reporting See Error Reporting on page 7-10. External GPS See External GPS on page 7-11. Managed Programs See Managed Programs on page 7-11. Memory See Memory on page 7-12. Power See Power on page 7-14. RIL See RIL on page 7-13. Regional Settings See Regional Settings on page 7-14. Remove Programs See Remove Programs on page 7-14. Screen See Screen on page 7-16. Task Manager See Task Manager on page 7-17.
Backlight The Backlight system setting enables you to customize backlight functionality for the display. The backlight for the color display is user-defined. Tap Start > Settings > System > Backlight. There are two tabs: The Battery tab determines the backlight timeout when the terminal is running on battery power. The External tab determines the backlight timeout when the terminal is running on external power. The options on each tab are the same.
Certificates Certificates shows you the certificates that are recognized by the operating system. Encryption Encryption gives you the option of encrypting files placed on storage cards so that those files cannot be read by any other device. Error Reporting Error Reporting gives you the option of enabling or disabling the error reporting function of Windows Mobile 6.5.
External GPS External GPS determines which port a third-party GPS software application can use to access the GPS receiver. Note: You need the installation parameters from the GPS manufacturer to configure the connection. Managed Programs Managed Programs are a list of programs that are managed if enrolled to enterprise domain. Managed Programs is the client-side that works with the server product System Center Mobile Device Manager (MDM).
Memory The Memory system setting displays capacity and usage statistics for both RAM (volatile) and IPSM/ Storage Card (non-volatile) memory. Access this setting whenever you receive system messages about memory. You cannot change the terminal’s memory allocation in the Memory system setting. To change the memory allocation, you need to use the SetRAM Power Tool (Start > Power Tools > SetRAM). For more details, please refer to the Honeywell Power Tools User’s Guide, which is available for download from www.
RIL The RIL Information screen displays useful statistics for the radio. To verify whether or not the GSM radio is enabled, check the Dolphin Wireless Manager (see page 8-5).
Power Power system settings contains two tabs: Battery and Advanced. Battery Tab For more information, see Batteries on page 3-13. Advanced Tab Determines power time-outs. For On battery power, select from the drop-down list, the number of minutes of inactivity you want to pass before the terminal powers off when running on battery power. For On external power, select from the drop-down list, the number of minutes of inactivity you want to pass before the terminal powers off when running on external power.
1. Tap Remove Programs. In the list, select the program you want to remove. 2. Tap Remove. The following message appears: 3. Tap Yes. Wait while the program is removed. 4. Verify that the program no longer appears in the list.
Screen The Screen system setting contains three tabs: General, Clear Type, and Text Size. General Tab Orientation The General Tab enables you to set the dynamic screen rotation. Three choices of screen orientation are supported: Portrait, Landscape (right-handed), and Landscape (lefthanded). Align Screen The General Tab also allows you to re-align the screen. You need to re-align the screen if tapping buttons or icons with the stylus no longer seems to work appropriately.
Task Manager The Task Manager provides information about applications and processes running on your mobile computer. You can use the Task Manager to monitor the memory and CPU usage of specific applications and processes. Check the Task Manager when you are receiving out of memory errors or when the mobile computer is running slowly.
7 - 18
8 Communication Connections Menu The Connections system setting provides access to the terminal’s various wireless communication options. Icon Tapping this icon… Beam Enables infrared communication. See Receiving Data on page 8-3. Connections Opens Microsoft’s connections manager. See Connections Manager on page 8-4. Dolphin Wireless Manager Manages the wireless radios installed in the terminal. See Dolphin Wireless Manager on page 8-5.
Using the IrDA Port Using the IrDA port, you can send and receive data between the terminal and other devices equipped with infrared. This can include, but is not limited to, Windows Mobile information such as Contacts and Tasks, as well as software upgrades. IrDA Port Location IrDA Port To send or receive, the IrDA ports of both devices - whether it is two terminals, or a terminal and a host device - must be aligned with each other and within a close range. The maximum data transfer speed is 115 Kbps.
5. When the IrDA port finds the aligned IrDA port, it immediately starts sending the selected file. The selected device reads “Sending.” 6. When the file transfer is complete, the selected device reads “Done.” Receiving Data The Beam Setting must be set to receive all incoming beams from other infrared devices. 1. Verify that beam settings are set to receive. Tap Start > Settings > Connections > Beam. The Beam Settings window should appear as follows: 2. Align the IrDA ports. 3.
Connections Manager Microsoft’s Connections Manager sets up multiple network connections to Internet Service Providers (ISPs) via external modem. Do NOT enter connection parameters in the Connections Manager if: • You are using one of the on-board wireless radios to connect to a network. The Dolphin terminal uses the settings from each radio’s configuration utility to connect. • You are using Wireless Zero Config. By default, WZC is disabled on Dolphin terminals.
To complete the setup screens, obtain the network parameters from your system administrator. Modify an Existing Connection Manage Existing Connections appears on the Connections tab after at least one network connection has been established. Tap Manage Existing Connections on the Tasks tab and follow the setup screens. Advanced Tab The Advanced tab enables you to select the default network, dialing rules, and IP address exceptions for modem connections.
Dolphin Wireless Manager Window Tap Start > Settings > Connections > Dolphin Wireless Manager If a rectangle is grayed-out, then the radio is not installed on the terminal. . These buttons show you the state of the radio. If applicable, information about the radio appears when the radio is activated. Enabling the Radios 1. Tap Start > Settings > Connections tab > Dolphin Wireless Manager. 2. Tap anywhere inside the rectangle or the OFF button inside the rectangle. 3. The radio begins activating.
Accessing Radio Configuration Utilities Each of the three radios has its own configuration utilities that you can access through the Menu. There are three radio configuration utilities: For 802.11a/b/g: Tap WLAN Settings and the Honeywell WLAN Security Supplicant opens. The Honeywell WLAN Security Supplicant User’s Guide is available for download from the Dolphin 9700 product page at www.honeywellaidc.com. For Bluetooth: Tap Bluetooth Settings and the Bluetooth Settings open.
ActiveSync Communication To synchronize data between the terminal and the workstation, ActiveSync 4.5 or higher must be installed and configured for the appropriate communication type on the host workstation and the Dolphin terminal. Dolphin terminals ship with ActiveSync already installed. Therefore, if ActiveSync is already installed on the host workstation, you just need to connect the Dolphin terminal to the host workstation (via Dolphin peripheral) to initiate communication. If ActiveSync 4.
Setting Up the Host Workstation Verify that ActiveSync is configured to use the appropriate communication type by clicking File > Connection Settings. For USB communication, check Allow USB connections. For RS232 communication, connect to COM1. Note: You can have both USB and RS232 selected in the software without affecting processing. However, your hardware setup should use only RS232 or USB, not both.
Installing Additional Software In addition to the default programs installed on your terminal when it is first booted up, you can install any program (created for a Windows Mobile-based device), as long as the terminal has enough memory to store the program and the program has an EXE, CAB, or DLL extension. The most popular place to find software is on the Windows Mobile website: www.microsoft.com/ windowsmobile/en-us/downloads/default.
• If you want the program to be part of the Autoinstall that occurs after every hard reset, place the program file in the Autoinstall folder (My Windows Mobile-Based Device > IPSM > Autoinstall). 3. Depending on the program, you may need to open File Explorer on the terminal, navigate to the folder where the program is located, and tap on the program file to install it.
COM Port Description COM7 GPS: COM Port for the GPS receiver COM8 USB Serial: Virtual USB Serial port for ActiveSync COM9 Bluetooth BTHATCI server 8 - 12
9 Working with GSM/HSDPA/UMTS/GPRS/EDGE Overview The Dolphin 9700 terminal can be configured with an integrated, embedded GSM/UMTS/GPRS/EDGE penta-band radio module for WWAN communication. GSM Short for Global System for Mobile communications, GSM is an open, non-proprietary wireless WAN system that is constantly evolving and growing.
Voice and Data Communication Dolphin terminals with integrated GSM/HSDPA/UMTS/GPRS/EDGE radios are optimized for the following two-way voice and data communications: Voice: GSM voice data (dial-up) Data: Available speed depends on the wireless network carrier and their supported packet-data technology in addition to network conditions. GPRS Class 10: data transmission max. 85.6 kbps (DL), max. 42.8 kbps (UL) HSDPA: data transmission max. 3.6 Mbps (DL), max. 384 Kbps (UL) UMTS: data transmission max.
Installing a SIM Card 1. Press the Power key to put the terminal in Suspend Mode. 2. Release the hand strap near the base of the terminal. 3. Remove the battery door and the battery. 4. Remove the protective cover over the SIM socket. 5. Unlock the access door to the SIM socket by sliding the door away from the serial number label located in the battery well. 6. Lift the door up to expose the socket. 7. Insert the SIM card into the socket.
Enabling the GSM Radio By default, the GSM radio is not enabled after a hard reset. Verify the status of the radio in the Dolphin Wireless Manager. Tap Start > Settings > Connections > Dolphin Wireless Manager . If the Phone is set to OFF, tap the Phone rectangle and the GSM radio enables. Voice Communication You can use the Dolphin terminal as a phone over the GSM radio.
Volume Control & Blue VOL PG Use the Dolphin keyboard to adjust the volume. To raise the volume, press the Blue modifier key + up arrow. To lower the volume, press the Blue modifier key + down arrow. Or Press the up or down arrow on the Volume Control button on the right side of the device to adjust the volume of the active speaker, see Volume Control Button on page 3-8. Accessing the Dialer Window When the GSM radio is active, tap Start > Phone . The Phone dialer opens.
Sending Calls After the number is dialed, tap Talk Note: The or press the green Send key . icon indicates that the phone is in use. Ending Calls While the phone call is live, tap End or press the red End Key . Keyboard Combinations for Calls Keyboard To Send a Call, Press… To End a Call, Press… Green Send Key Red End Key Green Send Key Red End Key 31-key numeric keyboard 45-key QWERTY keyboard Accessing Voice Mail Tap Start > Phone > Speed Dial > Voice Mail > Call.
Setup Options Tap Menu > Options. The Phone Settings tab windows appear. Phone Tab Services Tab Network Tab Establish or change a PIN on the Phone tab. For each service, the phone will read settings from the network on the SIM card and display the available options from the carrier. You can set networks on the Network tab.
Data Communication You set up data communication via the Connections Manager. The carrier on the SIM card is the ISP. System Requirements • The GSM radio must be enabled; see Enabling the GSM Radio on page 9-4. • You must have an active SIM card with a DATA plan installed; see SIM Card Installation on page 9-2. Information Requirements You must have from the SIM card carrier: • The APN (access point name). • The username and password of the account. Establishing Data Communication 1.
4. Enter the Access point name. Tap Next. 5. Enter the username and password from the account. Tap Finish. 6. On the Connections window, tap Manage existing connections. The connection you just created should appear in the list on the modem tab.
7. Tap and hold on the connection. Select Connect on the popup menu. 8. The network icon in the navigation bar indicates the GSM radio is attempting to connect . Note: When the device is on a 2G (EDGE/GPRS) network, a data connection failure occurs if the phone is in use for a voice call while attempting a data connection. Simultaneous voice and data use is only supported if the device is on a 3G network. In 2G mode, a voice call takes precedence over data connections.
Manual Network Selection You can select Automatic or Manual network selection. The Phone defaults to Automatic network selection. 1. When an active SIM card is inserted in the terminal, tap Start > Settings > Personal > Phone appears. > Menu > Options. The Phone Settings window 2. Select the Network tab. 3. Under Network selection, select Automatic (the default selection) or Manual. a. If you select Manual, the Phone searches for available networks. b. The found networks appear. c.
9 - 12
10 Working with the Bluetooth Radio Enabling the Bluetooth Radio You enable the Bluetooth radio in the Dolphin Wireless Manager (see page 8-5). 1. Tap Start > Settings > Connections tab > Dolphin Wireless Manager . 2. Tap anywhere inside the Bluetooth rectangle and Bluetooth begins activating. 3. When the radio is activated (i.e., transmitting a signal), the OFF button changes to ON. Now, the Bluetooth radio is transmitting a signal.
Connecting to Other Bluetooth Devices You need to perform a device discovery and then select a discovered device and connect to it. Pairing happens as part of the connection process. 1. In the Dolphin Wireless Manager, tap Menu > Bluetooth Settings. OR Tap Start > Settings > Bluetooth . 2. Tap Add new device. The terminal begins searching for discoverable Bluetooth devices. 3. Select a device in the list and tap Next.
4. You are prompted to enter a passcode. If the device has a specific passcode, enter it in the Passcode field and tap Next. If the device does not have a specific passcode, enter one in the Passcode field and tap Next. The Bluetooth radio tries to connect with the device. 5. If you created a passcode, you will be prompted by the other device to enter the same passcode. Enter the created passcode to establish a paired connection.
8. The device appears in the list on the main window. 9. After the passcodes have been accepted on both sides, you have a trusted (“paired”) connection. Pairing and Trusted Devices The terminal does support pairing. Pairing happens during general connection setup. Paired devices are "trusted" devices. This means that there is unrestricted access to all services (including services that require authorization and authentication). A connection can exclude pairing.
Types of Devices and Services When you tap Add new device on the Devices tab, the Bluetooth radio scans for discoverable Bluetooth devices in range, which are Bluetooth devices that have been made discoverable. Device Types The types of devices in the vicinity of the radio appear in the list of discovered devices. Supported Services Only the services that are mutually supported on both devices appear on the Partnership Settings window.
Connecting to Bluetooth Printers 1. Make sure the Bluetooth printer is in range and set to be discoverable by other Bluetooth devices. 2. Look up the Bluetooth printer’s broadcasted ID. 3. Perform a device discovery (Tap Settings > Bluetooth > Add new device.) 4. Look for the Bluetooth printer’s broadcasted ID in the list of discovered devices. 5. Click on the Bluetooth printer’s ID and wait for the prompt to enter a Passcode. 6. Enter the Passcode and tap Next.
Transferring Files 1. Tap Start > File Explorer. 2. Navigate to the file you want to transfer. 3. Tap and hold on the file and select Beam File on the popup menu. 4. The Bluetooth radio begins searching for devices. When a Bluetooth device is first found, it appears as an Unknown device; the icon indicates that the device is a Bluetooth device. As data is retrieved, the device IDs appear in the list. 5. Tap the device to begin sending the selected file. 6.
Making the Terminal Discoverable By default, the Dolphin terminal is not discoverable, which means that the terminal will not be found by other Bluetooth devices. To make the terminal discoverable, tap the Mode tab. Select Make this device visible to other devices and tap OK. Selecting COM Ports You can select COM ports 0-9. For more information, see 9700 COM Port Assignment Table on page 811.
11 Working with GPS Overview The Dolphin 9700 terminal contains an integrated GPS module that allows location tracking of workers and vehicles, providing better utilization of field assets. Optional mapping and navigation software provides turn-by-turn driving directions and location information.
COM7 COM Port 7 can be set to the following baud rates: • 4800 • 9600 (This is the default baud rate and recommended for optimal GPS functioning.) • 19200 • 38400 Other baud rates are not possible. The baud rate selected on COM7 is the actual baud rate with which the GPS will be communicating. GPS Intermediate Driver When the first user of GPD1 opens the port, the GPS Intermediate Driver in turn opens port COM7.
12 Dolphin 9700 HomeBase Device Overview As the hub of your Dolphin system, the Dolphin 9700 HomeBase charging and communication cradle supports both RS232 and USB communications, which make it able to interface with the majority of PC-based enterprise systems. Charge Time The base completes a full charge of the main battery pack installed in the terminal seated in the terminal well in 4 hours.
Parts and Functions Front Panel Terminal Well Auxiliary Battery Well DOCK LED COMM LED AUX Battery LED Terminal Well Place the terminal in this well to communicate with a host device, power the terminal, and charge the installed battery pack. The base completely charges the main battery in a Dolphin terminal in 4 hours. If the host device is a workstation that uses ActiveSync, synchronization begins immediately. Auxiliary Battery Well See Auxiliary Battery Well on page 12-3.
COMM LED This is the communication LED. It indicates the status of data transfer between the Dolphin terminal and the host device. The color of this LED differs if the base is using the serial or USB port connection. If using the serial port This color means… Red Serial data is being sent from the host device to the base. Green Serial data is being sent from the base to the host device. Orange Serial data is being sent in both directions at the same time.
USB Port This USB Port is full-speed and 2.0 compliant. Using a USB cable, you can connect the base to a peripheral device, such as a workstation or printer. When the terminal is seated in the terminal well, it is connected to the peripheral device via the base. RS232 Port Use the 9-pin, RS232 cable from Honeywell to connect this port to a peripheral device for RS232 data communication. For more information, see Serial Connector on page 12-4.
Charging the Main Battery The base powers the terminal and fully charges its main battery pack in 4 hours. The base contains an intelligent battery charging system that protects the battery from being damaged by overcharging. The unit senses when a battery pack is fully charged and automatically switches to a trickle charge that maintains the battery at full capacity. Therefore, terminals may be stored in the base without damage to the terminals, battery packs, or peripherals.
Communication USB Dolphin terminals support USB communications out of the box. The base also supports USB communications via the USB port located on the back. The base acts as a USB device by interfacing the USB signals of the Dolphin terminal to the USB of the host workstation. Using a standard USB cable, the base’s USB interface allows the Dolphin terminal to communicate with a workstation. RS232 The base supports RS232 communications via the RS232 Communications Port located on the back of the device.
Communicating with the Dolphin Terminal To initiate communications between the Dolphin terminal and peripheral, complete these steps: 1. Insert the Dolphin terminal into the terminal well of the base. • The DOCK LED illuminates green. If the DOCK LED does not illuminate, make sure that the terminal is properly seated. You may need to remove and re-insert the terminal. • The Dolphin terminal activates; if the power is off, the terminal automatically powers on.
RS232 Pin Configuration Base /Host Port (DCE) IBM AT DB9 (DTE) IBM XT DB25 (DTE) Modem DB25 (DCE) Pin / Input Signal 2 / (RD) 2 3 2 3 / (TD) 3 2 3 5 / (SG) 5 7 7 4 / (DTR) 4 20 6 6 / (DSR) 6 6 20 7 / (RTS) 7 4 5 8 / (CTS) 8 5 4 Note: This base cannot be daisy-chained. Mounting Set the base on a dry, stable surface, such as a desktop or workbench near an electrical outlet.
Desk Mounting The DIN rail slot (7.5 X 35 mm) may be mounted on the bottom to allow for secure desk attachment of the unit if desired. Auxiliary Battery Well Serial and USB port location (not in view) DIN Rail (7.5 X 35 mm) Slide the DIN rail slot along the bottom panel. Then, using the appropriate nuts and bolts, secure the DIN rail to the desk or flat surface.
12 - 10
13 Dolphin 9700 Mobile Base Device Overview This charging and communication cradle is designed specifically for in-premise and in-transit data collection applications. It features a flexible mounting bracket, a cigarette lighter adapter, and a power cable to adapt it to your environment. The serial connector supports RS232 communication and power out to peripheral devices, such as handheld scanners.
Front Panel Terminal Well Fastener for the Stylus Tether Stylus Slot Volume Control Dial (not in view) Status LED Speaker Mounting Bracket Fastener for the Stylus Tether Stylus tethers can be purchased separately to help prevent accidental loss when the stylus is not stored in the stylus slot. A stylus tether is a coiled, elastic cord that tethers the stylus to the Mobile Base. Secure one end of the cord to the top of the base and the other end to the stylus.
Bottom Panel The power supply and RS232 connectors are located on the bottom of the unit. Power Supply Connector RS232 Communications Port Power Supply Connector Attach the power cable that came with the base to this connector. The base can be powered by an external DC power source of between 10 VDC to 48 VDC. To run on vehicle power, you can use the 12 VDC cable or 24 VDC cable option. The appropriate cable comes with the kit you ordered. The 12 VDC cable can be used with a cigarette lighter outlet.
Powering the Dolphin Terminal When seated in a base that is connected to the appropriate power source, the Dolphin terminal receives the power to charge its main battery and run its internal circuitry. Keep the base plugged into the power source so that the Dolphin terminal battery pack stays fully charged. For more information about powering the base, see Power on page 13-6.
Mounting The adjustable mounting bracket holds the terminal securely in place and gives the user a variety of options for mounting the base. When selecting a location, keep in mind that the power supply and serial connectors point straight out the bottom panel. 1. Loosen the turnscrew. 2. Insert the ball joint of the mounting bracket to the back of the bracket. 3. Insert the ball joint on the back of the base into the other side of the bracket. 4. Tighten the turnscrew to secure both ball joints. 5.
Brackets Bracket The bracket contains the turnscrew and two slots. Ball joints are inserted into each slot and secured with the turnscrew. Turnscrew The turnscrew is located on the top of the bracket. Rotate the turnscrew to secure or loosen the ball joint slots. Mounting Bracket The mounting bracket is what you attach to the mounting surface. It is comprised of a ball joint and flat disk. The disk contains drill holes you use to secure the base to the mounting surface.
Establishing Communication The RS232 interface allows the terminal to communicate to a workstation, modem, or any standard RS232 device using a standard serial cable and communications software. Requirements You need the following equipment: • A Mobile Base device powered by a power cable and power adapter cable • The RS232 communications cable • ActiveSync v4.5 or above on the host workstation • Windows® 98 Second Edition*, Windows® Me, Windows® 2000, Windows® NT (4.
RS232 Pin Configuration Base/Host Port (DCE) IBM AT DB9 (DTE) IBM XT DB25 (DTE) Modem DB25 (DCE) Pin / Input Signal 2 / (RD) 2 3 2 3 / (TD) 3 2 3 5 / (SG) 5 7 7 4 / (DTR) 4 20 6 6 / (DSR) 6 6 20 7 / (RTS) 7 4 5 8 / (CTS) 8 5 4 Refer to this table if you want to make your own cables. To do so, you must determine if your host RS232 device is: • 9-pin or 25-pin and • configured as a DCE or DTE device.
14 Dolphin 9700 ChargeBase Device Overview This 4-slot charging cradle that can power 4 Dolphin terminals, and charge their main batteries in 4 hours. Charging The base supplies power to the intelligent battery charging system in all Dolphin terminals, which senses when a full charge has been achieved and switches to a trickle charge to maintain the full charge. As battery packs charge, the charging circuitry follows the two-step charging process (CC-CV) that is recommended for Li-ion batteries.
Parts and Functions Front Panel Terminal Wells Dock LED Charge LED Terminal Wells The base contains four terminal wells. Each well has its own dedicated Docking LED and Charging LED indicator. Dock LED Each terminal well displays a Dock LED on the front that lights solid green when a terminal is properly seated, which means that the terminal and the base are connected. Charge LEDs Each terminal well displays a Charge LED on the front that lights green to indicate charging.
Power Supply The base includes a power supply that contains a power adapter to ensure the proper voltage. The power adapter is plugged into standard AC/DC outlets. Supplying Power 1. Be sure the power switch on the power adapter is in the OFF position. 2. Plug the power cord into the power adapter. 3. Plug the power connector cable into the power connector on the back panel of the base. 4. Plug the power cord into a standard wall outlet. 5.
Charging Terminals The main battery of each terminal charges in 4 hours. The intelligent battery charging system incorporated into all Dolphin terminals prevents overcharging, which means that Dolphin terminals may be seated in the base indefinitely without damage to the terminals, battery packs, or the base. 1. Power the base; see Supplying Power on page 14-3. 2. Slide the Dolphin into the terminal well. When the terminal is seated properly the Dock LED lights green.
3. Secure the DIN Rail to a stable, flat horizontal surface.
14 - 6
15 Dolphin 9700 QuadCharger Device Overview This 4-slot charging station provides intelligent battery management for the Li-ion battery packs used in Dolphin terminals. Capacity The charger holds 4 Li-ion batteries. Charging Time Charge time is 4 hours. Charging Process Each charging slot works independently of the other three. As battery packs charge, the charging circuitry follows the two-step charging process (CC-CV) that is recommended for Li-ion batteries.
Parts and Functions Top Panel Charging Slots Status LED Power LED Charging Slots There are 4 charging slots. Each slot holds one Li-ion battery and charges it independently of the other slots. When a battery is placed in each slot, it immediately begins charging. Power LED The power LED indicates if the QuadCharger is powered and operational. When the QuadCharger is receiving power, the LED illuminates green. Power Supply Connector You attach the power supply to this connector.
Supplying Power The charger must be connected to a power source via the Honeywell power adapter cable so that voltage is adjusted appropriately. 1. Locate the AC power adapter cable and plug it into the power source. 2. Connect the power cable to the power adapter. 3. Connect the power cable to the supply connector on the back of the charger. Power Supply Connector Power Cable 4. The power LED illuminates green, and the charger performs a self-diagnostic test that lasts approximately five seconds.
Recommendations for Storing Batteries To maintain top performance from batteries, follow these storage guidelines: • Avoid storing batteries outside of the specified temperature range of -4 to 104° F (-20 to 40°C) or in extremely high humidity. • For prolonged storage, do not keep batteries stored in a charger that is connected to a power source. Charging Batteries For best results, battery packs should be at room temperature before recharging them; temperature has a marked effect on charging.
Troubleshooting If you encounter problems with your QuadCharger device, refer to chart below for possible solutions. If problems persist, please contact Honeywell Technical Support. Problem Issue The Status LED does not come on when I insert a battery pack. Check the power connections; make sure the Power cable is inserted into the Power supply connector and the battery pack is properly seated. The Status LED lights red during charging. Try to charge the battery in one of the other charging slots.
15 - 6
16 Customer Support Product Service and Repair Honeywell International Inc. provides service for all its products through service centers throughout the world. To obtain warranty or non-warranty service, contact the appropriate location below to obtain a Return Material Authorization number (RMA #) before returning the product. North America Telephone: (800) 782-4263 E-mail: hsmnaservice@honeywell.
For ongoing and future product quality improvement initiatives, the 9700 comes equipped with an embedded device lifetime counter function. Honeywell may use lifetime counter data for future statistical reliability analysis as well as ongoing quality, repair and service purposes.
Limited Warranty Honeywell International Inc. ("HII") warrants its products and optional accessories to be free from defects in materials and workmanship and to conform to HII’s published specifications applicable to the products purchased at the time of shipment.
How to Extend Your Warranty Honeywell International Inc. offers a variety of service plans on our hardware products. These agreements offer continued coverage for your equipment after the initial warranty expires. For more information, contact your Sales Representative, Customer Account Representative, or Product Service Marketing Manager from Honeywell International Inc., or your Authorized Reseller.
Honeywell Scanning & Mobility 9680 Old Bailes Road Fort Mill, SC 29707 www.honeywellaidc.