Brochure

414 70-6910
Modutrol IV Motors
M4185 Line Volt; M8185 Low Volt Two-Position Modutrol IV™ Motors
Series 41 and Series 81 Modutrol IV motors are 2-position (line-
and low-voltage per motor control) spring-return motors. They
are used to operate dampers or valves in applications where it is
necessary or desirable to have the controlled element return to
the starting position in the event of power failure or interruption.
• Fixed torque throughout the entire voltage range
• Integral spring return returns motor to normal position in the event of
power failure
• Integral junction box provides NEMA 3 weather protection if motor is
mounted in the upright position
• Motor and circuitry operate from 24 Vac
• Quick-connect terminals are standard – screw terminal adapter is
available
• Adapter bracket for matching shaft height of older motors is available
• Motors have eld adjustable stroke (90 to 160 degrees)
• Motors are designed for either normally open or normally closed
valves and damper
• Integral auxiliary switches are available factory mounted, or can be
eld added
• Motors can operate valve linkages from the power end or auxiliary
end shafts for normally closed or normally open valve applications
• All models have dual shafts (slotted and tapped on both ends)
Application: Electric
Control Signal: Two position, SPST
Frequency: 50 Hz; 60 Hz
Fail Safe Mode: Spring Return
Auxiliary Switch Ratings: AFL - 120 Vac – 7.2A; ALR - 120 Vac –
43.2A; AFL - 240 Vac – 3.6A; ALR - 240 Vac – 21.6A
External Auxiliary Switches Available: Ye s
Shaft Rotation (upon control signal increase): Clockwise (as viewed
from power end) (normally closed)
Electrical Connections: Quick-connect terminals
Mounting: Foot-mounted
Power Consumption: Driving – 20 VA
Timing, Nominal: 30 - 60 sec
Feedback: No
Shaft Dimensions: 0.375 in. Square (10 mm Square)
Motor shafts: 2; Dual-ended shaft
Deadweight Load on Shaft: Either End – 200 lbs.; Combined on both
Shafts – 300 lbs.
Approximate, Dimensions: 6 7/16 in. high x 5 1/2 in. wide x 8 3/4 in.
deep (164 mm high x 140 mm wide x 222 mm deep)
Ambient Temperature Range: -40°F to +150°F (-40°C to +60°C)
Approvals, Underwriters Laboratories Inc.: Listed: File No. E4436,
Guide No. XAPX for USA and Canada
Approvals, CE: EN55011 (Emission) EN50082-2 (Immunity)
73/23/EEC (LVD)
Approvals, RoHS: 2011/65/ES
Accessories:
220736A/U – Internal Auxiliary Switch Assembly - 1 Switch
220736B/U – Internal Auxiliary Switch Assembly - 2 Switches
220738A/U – Adapter Bracket. Adjusts shaft height to match Modutrol
III motors
220741A2-TP/U – Screw Terminal Adapter Kit for 2 position Modutrol
IV Series 2 motors - Converts quick-connect terminals to screw
terminals
221455A/U – Innitely adjustable Motor Crank Arm
4074ERU/U – Weatherproong kit. Protects motor from driving rain
when mounted in any position. Not needed if motor is mounted
upright.
50017460-001/U – 24/120/230 Vac Internal Transformers for Series 2
Motors
50017460-003/U – 120 Vac Internal Transformers for Series 2 Motors
Material Number Torque Rating
(lb-in.)
Torque
Rating (Nm)
Supply Voltage Internal
Auxiliary
Switch
Factory
Stroke Setting
Stroke Internal
Transformer
Weight Includes Tradeline
Value
M4185A1001/U 60 lb-in. 6.8 Nm 120V 0 160 degrees Adjustable; 90 to 160
degrees, Asymmetrical
50004263-003 9.5 lb Transformer
M4185B1009/U 60 lb-in. 6.8 Nm 120V 1 160 degrees Adjustable; 90 to 160
degrees, Asymmetrical
50004263-003 9.5 lb Transformer
M4185B1058/U 60 lb-in. 6.8 Nm 24V; 120V; 230V 1 90 degrees Adjustable; 90 to 160
degrees, Asymmetrical
50004263-001 9.5 lb Transformer
M4185C1007/U 60 lb-in. 6.8 Nm 120V 2 90 degrees Adjustable; 90 to 160
degrees, Asymmetrical
50004263-003 9.5 lb Transformer
M4185E4006/U 60 lb-in. 6.8 Nm 24V; 120V; 230V 1 160 degrees Adjustable; 90 to 160
degrees, Asymmetrical
50004263-001 9.5 lb Transformer Tradeline
M4185E4014/U 60 lb-in. 6.8 Nm 120V 1 160 degrees Adjustable; 90 to 160
degrees, Asymmetrical
50004263-003 9.5 lb Transformer Tradeline
M8185D1006/U 60 lb-in. 6.8 Nm 24V 0 160 degrees Adjustable; 90 to 160
degrees, Asymmetrical
None 8.5 lb Tradeline